Golf VI R :: Creaking Noises Coming From Shifter Assembly
Dec 11, 2012
I'm looking to purchase a complete shifter assembly (cables, plastic box, shift lever, ect. Not the parts that bolt to the transmission itself) so I can reverse engineer them without having any down time with my car. I want to make an aluminum box and shifter assembly to eliminate all the plastic components in the stock shifter mechanism. I'm thinking along the lines of a VWMS billet shifter mounted down low in the box so it isn't seen when a shifter boot is used. This will hide the really cool assembly, but I'm after function here.
I'm currently at 23k miles and there are creaking noises coming from my shifter assembly. The shifter mechanism has also lost the crisp feeling it once had when it was new. The dealer has offered to replace it under warranty, but I want to do it once and do it right. The OEM plastic stuff will not cut it.
View 12 Replies
Advertisement
Lately, been hearing a lot of creaking noises coming from the sunroof in the closed position. I have open and closed it a few times just to make sure it was aligned improperly. Maybe it was a one-time thing from having it open on a nice day but it has been pretty consistent now. Seems to be fine otherwise, opens and closes, no wind noise when closed, etc.
View 11 Replies
Vehicle: 2009 Toyota Corolla
Mileage: 55000 kms
I am recently experiencing some weird squeaking/creaking noises coming from my front suspension.. It manifests whenever I am going over humps faster than usual (or if the humps is not "perfectly sloped"). I seldom experience this during daytime but during nighttime, it is very evident.
this is the list of things that I replaced already:
2x ball joints
2x stabilizer links
2x shock absorbers
2x tie rod
2x rack ends
Did some wheel balancing and wheel alignment already...
I was able to replicate this by parking the car in a slope - parallel to the street with the wheels turned to right or left, and pushing the top fender downwards.
Driving along our streets, highway, and highway curved ramps is flawless.. Could this be bushings on stabilizer bars? or the control arms?
View 1 Replies
2013 4dr Stage 1 w/ dog bone tranny insert, VWR springs, 29K mi. LONG time Corrado VR6 owner - new to OBD II / turbo cars.
Car just doesn't feel as "solid" as it should. I expected it to feel really buttoned down with a quiet cabin.
I hear annoying creaking type noises when going over bumps / rougher roads (even did this with stock springs) Sounds like coming from rear interior, like window seal areas.
Not sure if this is due to body flex or something else. Anything to address this? Would any kind of stabilizer bars (front strut / rear hatch / under body chassis) work? or make it worse?
View 10 Replies
How to change the Shift Assembly on a 2002 Toyota Prius.....This is the only car that I have now and I have to get it going before school starts.
View 4 Replies
My 1983 Ranger is in the shop. I'm being told that I need to replace the shifter assembly. I understand that this is a Mazda part, from a TK5 transmission. These parts are interchangable between bronco ii's of the same era.
View 1 Replies
I have a 2013 4 Door Golf MK6 with the following:
DG springs
225 X45 X17"
Hotchkis RSB ( set on the softest setting which is 90% stiffer over the OEM one)
Neuspeed Endlinks
About two weeks ago I started hearing some creaking noises coming from the rear of my car. I thought, I need to put some grease to the RSB bushings, but this didn't work. After a close inspection I notice that the sway bar was rubbing.
The RSB was installed about 3 1/2 months ago and didn't have any issues. What could be causing the problem? I am suspecting the endlinks are going to be culprit. the car is used as a daily driver. what endlinks would you recommend to get?
View 5 Replies
So I just replaced my upper strut bushings and bearings and there's still noises coming from the struts or idk what it is but its coming from up front and when I back up and turn the wheel or when I am driving down my drive way there's little bumps and once i drive over them the car just makes all this noise. Pretty much what else could it be? are my struts blown? or could it be something is loose?
View 14 Replies
I am experiencing issues with front shocks RS2 Coilovers. I have this knock occurring from both front shocks. If they're set the softest, they're the worst...knocking noises over all small sharp bumps or sharp dips in the road. If I set them to full stiff and you drive it immediately after the ride is stiffer, but smoother, almost no noise at all, only when driving over roads that throw weight from side to side quickly will create the knock, but very light. However after a while of driving it just starts to make noise again as if they're unwinding on there own. When I check their position, they're where I left them. It feels as if the shock pressure bleeds until I perform the same routine and it feels tight again for a short period.
Its starting to annoy me now, car has 6000km on it and 600 km on the coilovers.
View 10 Replies
So I've had this moaning/creaking noise for the last few weeks that seems to be getting worse and worse. The noise is most noticeable when coming to a stop or accelerating from a stop - once at higher speeds it goes away... but when coming to a stop or slowly accelerating from a stop, the car literally sounds a pirate ship - kind of scared to keep driving without knowing exactly whats going on...
I've completely disassembled and reassembled the rear suspension multiple times and everything is lubricated, tight and proper....
Considering Ive looked at everything in the rear - Is there anyway possible that even though the sound seems to be coming from the rear - that maybe it could just be bad strut bearings or mount in the front? And maybe there is just some funny reason (some sort of audible illusion?) why I seem to be so certain about hearing the sounds from the rear and not the front?
Not sure about hearing a creaking/moaning noise from the rear - only to find out it was actually bad strut mounts or bearings in the front or maybe even bad front LCA bushings? I'm just a little lost and really unsure of what else could be causing this ridiculous noise..
View 6 Replies
I've been noticing my GTI has been making some weird noises, especially after only have 380 miles on it. When idling with the clutch engaged, it makes a rattling noise that goes away when depressed. There's also a rather loud sound coming from the timing belt and just underneath the plastic engine cover. I'm hoping it just needs breaking in, but I'd just like some reassurance that it's nothing serious.
View 8 Replies
Ive been hearing some noises coming from the right side of the dashboard when I turn the heat on. Then last night, smoke/steam started coming through the vents with a strong odor. Popped the hood and there is some smoke coming from behind the engine as well. Sounds like the heater core but why the smoke from the engine? Temperature gauge reads as normal and I have no lights on the dash.
View 3 Replies
I did a quick search on the 'creaking' or 'rattle' noise seemingly coming from the B-Pillar and found just a bunch of complaints.
Any fix, whether DYI or dealer? It is driving me crazy and is completely unacceptable for a brand new car, of any make or model. What to do and that is what I will do. No matter the measures at this point.
View 14 Replies
Any noted 2.0T, B6 experience/solutions for squeaking/creaking suspension noises seeming to originate from shock/strut tower areas? I purchased new in 2009, 37K mi ago. VW dealer service persons think they hear it sometimes. Been chasing this problem for a year or more, mostly notable in cold weather. Condition evident driving on uneven pavement, dips in the road etc. Passengers ask "what is that squeaking".
View 7 Replies
I recently changed the bushings and installed SS kit. I don't know if this was the case before, but now while in any gear, i can still move it approx half inch to the right and half inch to the left.
I checked everything and all screws are tight. Could it be that the shifter cables need adjustment?
View 24 Replies
My girlfriend has a 2001 Subaru Forester. She just had a new clutch installed. When she got it back there is a chirping sound coming from around the slave piston assembly. The mechanic has worked on it several times and he can't figure out what is causing the noise. I can make the chirping start or stop by moving the fork on back of the slave piston but can't figure out why it is making this noise?
View 4 Replies
Recently purchased a LS-460(CPO). The vehicle has 36,000 miles logged. I've had a few issues in the first few months:
1) Whining noise coming from the right front wheel assembly..front rt bearing worn.
2) Replaced homelink system..would not program.
3) Glove box had to be replaced due to not closing properly(adjustment not possible)
4) Plastic coating on all 4 locking lugnuts was chipping and rusting. I'm not trying to be a troll here..however, just not what I expected from Lexus. I really enjoy driving the vehicle..I'm just not sure I want to own it outside of a warranty.
View 14 Replies
This a 3.3L engine although the noise has nothing to do with the engine but front left near tire assembly, what can it be?
View 6 Replies
I've had some awful noise coming from the front drivers side of my car. Determining the likly cause to be the wheel bearing, I decided to tackle replacing the hub assembly as a lovely weekend project. Things were going along ok - Removed brake caliper, removed the axle nut (that wasn't fun), removed the rotor (rather persistently stuck on, but it gave in the end), and then came removing the hub assembly itself. Had a rented hub puller, put it on, started tightening it down and tapping on the hub as I went. It was getting pretty tight on there (was starting to worry about the safety of the cv shaft), and then as I tapped on the hub one last time, the hub and hub puller popped off the car... I was elated, until I realized rather than pulling the entire hub assembly out, it had actually separated the inner track of the bearing from the outer track, leaving the wheel bearing and flange behind inside the steering knuckle.
So, here I sit, with half my hub assembly on the ground and the other half still in the car. How to get the rest of the hub assembly out, now that there is nothing to really pull on? I've tapped around on it for a couple hours, and soaked it in enough penetrating oil to make the car flamable, but no give. I've even tried putting the hub bolts back in through the back and tapping on them with a hammer to no avail (probably going to have to replace the bolts now, but one problem at a time).
View 19 Replies
What are the different noises you hear little while after switching off the car? Also after keeping the car switched off for a while when you open the driver door there is a noise of fluid being pumped, same happens little while after shutting down the car.
View 6 Replies
I just received a new bumper / grille assembly to put on my car, my old one got destroyed pretty much, I was wondering if there was a guide of some kind or a diagram that i can use to put this on? I'm a bit short of time so im looking for anything ASAP.
Any diagrams / Visual guides / tips and tricks of the sort, or even some pointers on putting the whole front end assembly on.
View 6 Replies
