Golf VI R :: Clutch Ticking On Foot When Depressed?
Aug 4, 2012
I read all of the threads regarding clutch vibrations and other problems but I have 1,500 miles on my R and since day 1 I have been feeling a very slight ticking on my foot when the clutch is depressed. It gets more pronounced when I rev the engine a bit but nothing you can hear. Is this a normal feeling or should I not feel this at all.
I'm getting the APR tune next week and will do HPFP/intake soon but I need to be convinced that the Carbonio Intake is actually an upgrade from the stock intake with just a K&N filter, it doesn't look much different, the intake area looks the same as stock. I don't want to have to modify the engine cover or else I'd get the VWR intake. Any experience with the K&N vs stock vs Carbino?
Not sure if it was just the hot/humid weather yesterday but the car felt a little boggy when starting in 1st gear like it was running too rich or something. Any history of this?
View 12 Replies
Advertisement
I've searched but can't find what my problem is , ON idle when clutch is not depressed loud ticking noise , but when I push the clutch in it goes away . Also the ticking noise will get louder if I accelerate . ONLY Im first gear will I hear a loud grinding noise which means I have to quickly switch into second . Sound similar to something being dragged along a fence . Again the grinding sound I'm first will only happen if I'm giving it gas. Car has 325,000 km . Something with the transmission ?
View 1 Replies
I've been driving manual transmission vehicles - from my '72 Pinto to big trucks - for 40 years. This happened recently in a VW Golf I had rented: While driving down a mountain in a tunnel in Norway, with the clutch depressed, there was a loud POP noise.The clutch became engaged, and the clutch pedal did nothing. I'll spare you the details of the harrowing aftermath, the language barrier issues in the sticks of Norway and such. In the end, the rental company is charging us a couple thousand bucks for breaking their car. I maintain it was not Driver Error. My local VM service manager indicated that the Slave Cylinder on the Golf has been a problem for years, and is probably what went bad, but - as a rep of VW - is not willing (allowed) to put that in writing. The garage that fixed the Golf indicated it was Driver Error. I'm guessing everything tranny-wise got beat up when the Slave gave out, making it look like I'm a bonafide Clutch Masher.
View 19 Replies
Ntices a strange idling noise? At first i thought it was just something like the radiator fan but it's tied to the clutch pedal..when the clutch is depressed the noise gets more isolated and a little louder. Everyone else in my car doesn't notice it but to me it sounds like something is out of balance... car only has 6500 miles on it and has never been driven hard... 2010 Golf 2.5 5spd .....
View 9 Replies
This morning when I started my car the RPMs were all over the place. The engine would rev to just below 2k and then drop, as it it were gonna die and right before it did, it would rev back up. Then, when I tried to move it, it would not accelerate and would hardly move and while coasting it dies if the clutch is depressed. The car does not die when idling (albeit a very rough idle) but it does when it is moving.
It flashed a check engine for a few seconds at one point but went away and has not come back on. I am running APR Stg 1 and a Carbonio intake. I switched from 93 octane mode to stock and nothing changed.
View 3 Replies
I started having issues with my clutch pedal "dropping out" from under my foot. Not necessarily during a shift. It still works but will stay down towards the bottom of the travel and after either lifting with my toe or pressing it a few times it kicks back up and usually stays up. Is this my clutch dieing? or something hydraulic related? Hoping I don't have to replace clutch. Searched R32 forum for anything similar and couldn't find anything.
View 8 Replies
I came home last night and rolled into the driveway. With the car in neutral I took my foot off the clutch and the car stalled. I get in the car this morning to go to work, and it's still happening. I put it in reverse to see if it will drive.....and now it's stuck in reverse.
I can't get it into any other gear or neutral..........even when the car is off. I've unattached the linkage, and the shift knob moves freely.....so I don't think it's that. I found these old threads (one even mine)
[URL] ...
[URL] ....
[URL] .....
So I'm lead to believe that the master/slave cylinder is acting up again. Also, how can I get it into neutral so I can at least get it towed and stop blocking my driveway?
View 9 Replies
I have a 2004 Treg with 28k miles. This car has the air suspension and the dashboard with the LCD display.
When the foot pedal break is released, the break light remains on and the center display sounds off the alarm that the foot break is on as the car begins to roll.
After half dozen additional pulls of the break release handle, the issue goes away. This is now happening almost every time the foot break is used.
View 6 Replies
This is regarding my 96 BMW 328i. It has approximately 177,000 miles on it. Over the past year, I've replaced the cooling system, fuel pump, alternator and trans fluid for kicks. So, I'm understandably frustrated with it. Anyway, to my story:
On my way into work, whenever I pressed in on the clutch, it would make a loud clunk/pop and freak me out. I turned around after 1/4 of the way and swapped cars.
My mechanical skills are maybe 3 on a scale of 1 to 10. I'm not afraid of changing oil, brake pads, transmission fluid, changing an alternator, etc. But I want to have someone to blame for anything that involves anything within the engine block/head/transmission continuum.
I noticed that a heat shield was loose between the driveshaft and the exhaust. I rapped it with a hammer, and the heat shield didn't make a noise anything like I'm hearing. So, it doesn't sound like that's the real culprit here.
View 5 Replies
2013 tdi 6mt. I am noticing that my clutch clicks when the pedal is depressed. it does not happen when I first start driving in the morning, but it seems that once the cabin is warmed slightly it starts then clicks each and every time. It is annoying and it appears to be related to the different temps outside vs the cabin. I did not notice it during summer or early fall but it is cold here now.
View 24 Replies
I bought my Hyundai new in late 2011. No problems with the car (other than no spare tire???) until just out of the warranty (63,000). Had a noticeable drop in power on the highway. No warning lights. Drove another 100 miles with power intermittently dropping. Next day engine light comes on. $800 later I have a new high pressure fuel pump. All seems well. after a few weeks, I notice that the car seems to be revving when I depress the clutch to change gears, like up to 4000 rpm's. If I leave the clutch in for a few seconds it will begin to decrease. But if I shift right into gear as I have done for the last 35 years of driving, it is not smooth, jerky. This seems to happen mostly going into 2,3, and 4th gear, always going up. It never happens when downshifting. I tried tapping the brakes when shifting up, and sometimes it does seems to drop the rpm's. What it might be. It probably is related to the work that was done, but I don't really trust the dealer and want to have a little info going in.
View 1 Replies
2009 Accent 5 speed 66K miles. This is something which I recently noticed with the onset of winter. When I depress the clutch pedal, I have a very audible squeak. Think old door hinge squeak. So metal is rubbing against metal somewhere inside the bellhousing without enough lubrication.....not good. I pulled off the dust boot on the side of the bellhousing and tried my best to push moly grease around the clutch fork stud, hoping that was the origin. The noise went away for roughly a half a day but is back in full force....funny how cars do that.
Space seems EXTREMELY limited on lubricating the proper area. Or....is this a warning mechanism built into the clutch pressure plate assembly to warn of replacement soon? While I am asking these questions, what is a good time to look into replacing the clutch? The parts for the car seem relatively cheap, if I replace the clutch assembly, I may consider replacing the flywheel and clutch hydraulics as well as a whole system replace/refresh.
That aside, is there anyway to eliminate the squeaking without having to crack open the bell housing?
View 13 Replies
I have a 09 Sonata which when shifting once, the clutch depressed but did not come back up. While waiting for Hyundai service to come I tried to move the car down the hill to a shady spot on curb for my son and the clutch started working normally and has for 6 months...
View 2 Replies
Earlier this summer I bought a 2003 Hyundai Accent with 130k miles on it. Recently I have noticed a squeaking/squealing sound coming from underneath the hood. I first noticed it at traffic lights, but I have determined that it occurs whenever the clutch pedal is depressed, and continues until the clutch is released.
My first question is - is this serious? (Is it dangerous, or will it compound significantly if I do nothing?) The clutch still seems to work fine, and I can stop the noise at traffic lights etc... by putting the car into neutral and letting off the clutch.
My second question is, how did I cause this? Coasting with the clutch fully depressed, or too much downshifting?
Background: Recently, I bought a Scan Gauge to provide real-time fuel economy feedback, and began to experiment with different driving styles. I found that I could really boost my fuel economy by coasting down longer hills on the highway (when there were no other cars around). To do this I was pressing the clutch all the way to the floor, figuring it was the same as putting the car into neutral. When my speed began to decline after the hill I'd ease back into 5th. One hill in particular comes into town where there is a light. If the light turned red I would stop coasting and do some quick downshifting as well as breaking. I was pretty aggressive with the downshifting on a few occasions.
Did either the downshifting or the coasting likely contribute to my problem? If coasting was an issue, would coasting in neutral cause a similar problem?
View 2 Replies
I have a 1999 Saturn Coupe with about 47,000 miles on it. Today, my clutch started squeaking every time I depressed it. Is this forewarning of something bad, or should I ignore it?
View 2 Replies
So, I bought the truck used and everything about this truck is great minus the shifting difficulties in first. With the truck at a dead stop, the clutch depressed, and the shifter in neutral it can be near impossible to shift into 1st (it's possible with a lot - emphasis on a lot - of force). No grinding, clashing, knocking in the shift knob - it just wont go into gear. I can shift into 2nd-5th and reverse without too much difficulty. If the truck is in motion, once the vehicle gets between 2-5mph I can easily downshift into 1st. However, if I shift out of 1st and let the truck sit for, say, 5 seconds it is often very challenging to get the truck back into 1st.
I have tried to look up this problem online with limited success. What I found was it could be caused by:- something wrong with the clutch installation- a need to bleed the clutch (it's hydraulic and, although the reservoir is full, the fluid is a bit dirty)- perhaps a faulty clutch master cylinder- play in the clutch linkage- a broken spring in the pressure plate- a bearing that is starting to go out- worn synchros in 1st.
I am a machinist, not a mechanic, so it's hard for me to evaluate these ideas (beyond the cost associated with each). Given my limited knowledge of transmissions and my good mechanic friend's opinion, I think it's a broken spring in the pressure plate.
1990 Toyota Pickup 4x4 manual transmission. This is the original transmission in the truck, it has not been rebuilt (but has been maintained with regular fluid changes), and has a tad over 158,000 miles on it.
View 19 Replies
I have a 2002 Subaru Impreza WRX and recently it started making a squealing noise while the clutch is depressed at low speeds. I've researched that it's likely the pilot bearing or bushing? My questions are: should I have the entire clutch replaced? How much should it cost? And will I cause more problems if I wait too long to do anything? How long can I wait?
View 8 Replies
I have a 98 f150 with a 4.2L V6 and a 5 Speed M5R2 manual transmission, I recently got a rebuilt trans for my truck. I installed it with no issues, while my truck was still on jack stands I tested it out, it shifted into every gear no problem but after I took it off the stands and pulled it out of my backyard, when I take off in 1st its fine with the clutch being slowly released, but as soon as I let go of the clutch the truck just buckles and some times tries to flat out stop.
I'm not sure if I have a Clutch issue, Transmission issue or axle issue, when I tried it out on jack stands I had the stands supporting the rear on the axles so some of the weight of the truck was and the rear axle and it didn't buckle then so I wouldn't think it'd be the axles but when it was on the ground it'll buckle. I even had someone move the truck forward and release the clutch slowly until in was fully releases and looked underneath and saw the axle buckle upward,
What the issue is it only does that when the clutch is released or if I'm lucky enough to release it without buckling once I go to shift to second and press in the clutch the whole truck just comes to a complete stop without the engine stalling. I thought maybe it was a clutch issue and that maybe I put the clutch plate backward(which I'm pretty sure I didn't)but even if I did, I wouldn't even be able to shift it into any gear, at least that's what I think. I bleed the clutch before taking it out so I don't think that could be the issue either.
View 1 Replies
I have a 2011 Tiguan 125TSI with the 7 speed DSG. When it starts cold, you can hear a noise that sounds like a bad gear change when going from 3th to 4th, and 4th to 5th. It almost sounds like changing gears in a manual car without clutch completely depressed. It has been there since I got the car brand new, but recently it seems to be getting worse.
Once the engine gets warm, the sound goes away and gear changes are smooth.
I've asked the VW dealer about the sound and they tell me it is normal. Is this right? The problem is it is very hard to demonstrate to VW the issue since it may happen only once when the engine is cold. I've left it with the dealer overnight and they were able to reproduce it in the morning... but again, they tell me this is normal.
View 2 Replies
When I am stopped (at a red light, for example), the car wants to lurch when in 1st gear, even though I have the clutch pedal fully depressed. I know this is not a problem with the clutch master cylinder leaking by where you lose pressure on the pedal. Car has 245,000 miles and still has original clutch. Car/transmission work fine so long as I put it in neutral when I stop. Doesn't seem to do this w/reverse. Clutch also passes the "stall test" where you let it out in 4th gear with the hand brake on. What's going on here?
View 8 Replies
I bought a 2010 Elantra Blue in November. It has 1200 miles on it now, but as early as the 2nd week or so I became aware that there is occasionally resistance shifting into 2nd gear despite the clutch being fully depressed. It can also make a slight "crunching" noise after passing through the neutral position and fully into 2nd (though this sound is distinct from grinding, it's not the same as if you were grinding the gears). I've tried a million times to narrow down the cause (i.e. cold weather, low RPM shifting, high RPM shifting, slow shifting, fast shifting, gentle shifting, strong shifting) but every time I think I got it, and have corrected it, it happens again anyways.
View 13 Replies
