Golf VI R :: Changing Front Brake Replace Rotor And Pads?
Jul 12, 2016
Just got out of the dealer they said they recommend front brake change. They quoted me for ~730 just for Rotors/Pads/labor on the front (I am going to shop around).
I tried search Golf R Brakes info prior to posting but alot of the searches are for people buying Golf R brakes for Gti's.
1) Do I need to Replace Both Rotors and Pad at the Same time?
2) Currently Car is still stock and see's no tracks, the most car would see in the next 2 yrs would probably be stg 2+ if that. Would OEM Rotors + OEM pads be sufficient? or should i upgrade pads? Below is listing i found with some different pads options.
[URL]
3) Car is currently a 47.5k miles with oem brakes, should i just replace rears as well? even though dealer did not recommend?
4) SS Brake Lines, should i get them?
View 7 Replies
Advertisement
I'm at 30K miles and notice my front pads are nearing their end. Before someone says, "use search" I already did and didn't find anything. I know our front brakes are shared with the TTS so I figured I would start a thread for a central place regarding people's experiences. I'm quite impressed with the stock pads as I tracked the car and never got any fade all day. The squeal on the street is very occasional so I'm thinking VW put a more aggressive pad on the R in the first place. That being said, what have others found if they replaced their pads with something aftermarket? The car is my daily driver.
View 4 Replies
Scion TC for Camry SE 2007.
I changed the front brake pads and resurfaced the rotors. After putting everything back together, I took the car to test drive it. The stopping power is fine and there is no squeaking or robbing sounds. However, when I apply the brakes at lower speeds moving forward there is knocking sounds the comes with the tire rotations. What is the reason for this sound?
This is my second time changing the pads and rotors, with the first with no issues. I put grease between the shams and the pads, and I sprayed the rotors with brake cleaner before the installation.
View 8 Replies
I changed the front brake pads, took all the precautions during the change, did not disconnect the 12 v battery, pumped the brake pedal 12 times, started the car and no warnings. Now the brake pedal is a little spongy, if I press the pedal to the floor the VSC/TRAC light comes on, to reset it I have to press on the pedal again and the brakes do work.
View 11 Replies
2004 prius. I change the brakes on various cars all the time, and never had this problem. After I changed both sides, I started the car, and saw 4 lights:
- Red brake light
- The yellow exclamation light
- ABS light
- VSC light
The car now stops funny, and reading the service manual, it says that if there's a failure detected, that it will revert back to very basic braking (no abs, only fronts, etc..)... As I was exiting off the fwy, I realized this when one of my front wheels locked up, even and I was not stopping very well. Scared the crap out of me.
In any case, I can't see what I may have done which would cause a failure. The only thing I could think of is to bleed the brakes again, but I did this and think it's ok. Is there anything else I can check or is this something I have to get serviced? I saw another thread where they suspected the actuator, but it is somewhat a coincidence that it would go bad after I replace the pads? I'm not sure how the regenerative brakes works on a prius, and whether there's anything I could visually inspect to see if I bumped something???
View 19 Replies
Today as I was adding pressure to my tires I noticed the front brake pads were wearing unevenly. Both outer pads wore the same. More "meat" on the inner section of pads than on the outer, evenly worn, just sort of slanted down as you move out towards the outer rim of the brake disk.
Is this normal? What would cause this? Should I have it looked at? I've never seen anything but even pad wear, perfectly parallel to the brake disk.
Edit for these pictures to clarify.....
View 24 Replies
The front pads on the R shift from one side of the caliper to the other whenever I move from forward to reverse they make a loud "clack". I thought it might be an O.E. pad issue, but I've changed the pads out to EBC's, but still no bueno. The new pads fit snuggly into the calipers and seemed to have solved the problem at first, but about 5k km's in, they're making the same noise.
I have anti-rattle springs installed, but they're not working. Is there supposed to be a pair of shims between the caliper sliders and the pads grooves that the previous owner removed for some reason? I don't think so, because that car only had 25k km on it when I purchased it; but you never know.
View 12 Replies
What is the proper procedure in changing the brake pads without unbolting the caliper?
View 7 Replies
I am going to have to change my brake pads (I am probably going to do the rear shoes as well). I was wondering if I should get my Toyota dealer to change the fluid as well. I have 116,000 miles on her. Lots of highway driving, and this is only the first replacement set, these pads last forever. The fluid has never been changed before.
View 6 Replies
So, that means I have put 106,104 miles on my truck this year, and missed about 7 weeks for the truck being in the shop, could have been another 17,000.
So, it's time to replace the factory original brake pads?
View 14 Replies
So, I changed the front brake pads on my 2007 Prius blindly, and in doing so I bled the lines (I also had the key in my pocket!). Now, the ABS light, VSC light and (!) light all are on and continue to stay on while driving. Is this something as simple as resetting the codes? Is the vehicle safe to drive to a repair shop to set strait?
View 2 Replies
Replace front brake pads, rotors, and sensors. the front brake pad sensor was touching the rotor. Car still has brake pad lite on. Replace front sensors again just in case one was defective. Replace rear sensors, still lite is on.
View 4 Replies
I noticed the front brake pads were touching the rotors when I was painting the brake calipers. I had my e-brake engaged and in park. I'm assuming the e-brake only brakes the rear wheels because the front rotors were still movable. Although the car still rides fine but I'm not sure if this is normal.
View 1 Replies
recently I replaced the front rotors and pads on my 02 Saturn SL2. I did this because there was a grinding sound coming from the front left wheel well and I had noticed a band around the rotor that looked gouged. All in all, about 30 minutes of work, following the Hanes manual. In the course of disassembling the front left caliper, I realized that the cause of the gouge in the rotor was from one of the tensioning clips on the caliper bracket. One of the flaps on the clip had bent back and was causing both the grinding sound and the gouge in the rotor. So naturally, I replaced all the tensioning clips as well. After putting everything back together, I took the car on a quick test drive around the block. The noise, while lessened, was still present. Furthermore, after I got to work this morning, I noticed that that there is the start of the same wear pattern on my brand new rotor.
What could be causing this problem to reassert itself?
View 2 Replies
I have a lot of fun and satisfaction working on my GX and noticed that the rear brake pads soon will need to be replaced. I know how to take off the front rotors by putting some DW-40 and using a rubber mallet to get them off. However because of the parking brake, I don't know how to get the rotor out so I can resurface it, which at this point don't look that bad anyway. How to get the rear rotors off? I have to do my wife's ES350 too so I figure I'll do mine first then hers.
View 14 Replies
I'm trying to replace the front brake rotors on a 97 Ford Explorer (AWD, 5.0 L). I've removed the calipers and pads - but can not loosen the old rotors. It looks held on by rust - but do I need a special rotor pulling tool?
View 8 Replies
I put brand new pads on my 2003 sc430 about 6 months ago, and have noticed this rubbing sound coming from all 4 tires. It is very noticeable and annoying. I'm wondering if I should have put brand new rotors on the car while I was changing the pads. I did not here this noise prior to changing the pads.
I'm attaching a link of a video [URL] .....
View 14 Replies
ok, here's the story about my brake change on a 2012 elantra GLS. I changed my pads and rotors myself, he has done many brake jobs with little to no problems over he years. anyway, changed them on all four wheels and now on the drivers side there is a slight noise that happens sometimes. The noise happens once very rotation of the tire/rotor, not a constant noise. it sounds almost like the pads are hitting the rotor at a certain point and making a grind noise. the brakes seems to function properly and the noise happens only when rolling at slow speeds or when accelerating from a stop.
I have done everything properly, even used some caliper glue to hold the pads against the caliper. what my question is, is there anyway that the rotor is warped from the manufacturer? it sounds like it is warped and the pads hit it once every rotation. I have opened them up 3 times now to make sure everything is proper, even put it in drive jacked up with no wheel on it to see if its running smooth, of course it wont make the noise when jacked up.
View 24 Replies
How do you remove the front and rear rotors, Any DIY's out there I didn't see.
View 2 Replies
Having trouble with front brake pads rattling? About a month ago, I replaced pads - rotors - caliper pins on my 20th GLI. I know these cars ride a bit stiff but it sounds like my front end is about to fall off. All brake parts were torqued to spec - I've gone through all T25/T30 torx front end screws etc and I just can't find the rattle??? This has only started within the last few days. Any other places to check for obvious loose bolts etc?
View 15 Replies
I know on some cars and trucks you need a special tools to push the caliper back in. i just use a large c clamp to do the job. Question do i need any special tools to replace the front brakes pads?
View 7 Replies
