Golf V R32 :: Clunk When Turning Hard Left And Going Slow
Oct 18, 2008
I have the same clunk others have suggested may be strut mounts or something. It only happens when I'm turning hard left and going slow. it may happen only when I'm going slow because it's the only time i turn the wheel that much. it's not too loud and sounds like it's coming from the right front wheel well, somewhere around there.
It started about 3 days ago and is getting much more frequent in the last day. It now is happening every time i turn the wheel hard left, and occasionally when I turn right.I have a loose bumper right front also. it's going into the body shop next week to further diagnose by elimination.
QUESTION: is the car safe to drive if there's the possibility of a loose strut mount? i don't know too much about the suspension assembly.
View 1 Replies
Advertisement
I have a 2003 Jetta Wagon with 49000 miles on it. I noticed that when turning at slow speeds (like taking turns in a parking lot) I hear a klunk coming from the area of the left front wheel, and I think I feel it through the steering wheel. Yesterday I was going around a hairpin turn at a shopping mall and heard two clunks. Driving straight it doesn't happen.
View 8 Replies
When I turn my car to the left or right i hear a clicking sound. Usually happens when I am moving slow, like when backing into a driveway or parking spot. Could this be a tie rod, ball joint, or what? How can I be sure before just replacing parts? I need to have this fixed before I get my alignment, which has to happen before I get my rims.
View 2 Replies
I have a 2012 gti with 29k miles. Now I changed to coil overs for a shot amount of time however I shortly went back to stock for comfort. For the past few thousand miles I have been getting this creaking sound when turning left parked or slow speeds. I thought it might be strut mounts but its only left and isn't a clunking. I have three videos of the sounds so you can see what I'm talking about. I have heard of the infamous cv boot problem but if you look at the last video you can see the Cv boot looks in good shape..
Squeaking (my car)
Cv boot condition
View 13 Replies
Noticed my 5 week old MK7 GTI is making squeaky noises on the driver's side when turning left at slow speeds. What this could be? Occurs intermittently, not all the time. This is a leased vehicle, would this be covered by warranty?
View 7 Replies
So yet I found out about another common issue but not that publicized. This is the grinding sound when turning at full lock (left or right) in slow speed. I've read several people in the forum who has encountered this. I read different remedies but the most common one is to have the CV boots lubricated.
I have a 2014 Wolfsburg with almost 5k miles. I am really now worrying about my water pump crapping out on me but I heard this grinding sound yesterday.
View 12 Replies
My wife informed me about a noise coming from the chassis of her truck.
2007 Explorer XLT 4x4, 4.0 OHV, AT, 89,000 miles on the odometer.
We took the truck to dinner last night so I could investigate the problem. This occurs while only making left hand turns at slow speed.
There is a definite clunk sound AND feel. It actually sounds and feels like we are driving over a loose manhole cover, and IT DOES feel like metal to metal contact on the driverʻs sids of the truck.
View 2 Replies
I noticed that my ABS was engaging when I would slow down to a stop while turning left. I pulled the fuse for the ABS just to make sure that's what was causing the pulsating brake, and it was. Anyway, if it's an ABS sensor problem, would it be the front passenger side sensor if it's only happening when I turn left? Is there a way to test this. Would a scanner detect it? It hasn't been throwing a code or anything. Just the ABS engaging while braking and turning to the left when it shouldn't be.
View 6 Replies
Immediately after putting new tires on my '02 Taurus SES, steering is really hard at the pullout, or turning at slow speed just after startup. After several seconds, steering is back to normal. I did have the steering pump flushed out with new fluid several months ago, and fluid is up to level now.
View 6 Replies
I have a 01 Chrysler Sebring 4D Sedan. I have been working on cars many years, never done tie rods. This my first attempt, I messed something up I believe. I replaced both inner tie rods and outer ends. I followed what I thought was correct procedure., counted turns on ends coming off. Installed new ones the same amount of turns. Before I did this the steering was fine. Now when I turn sharp to the right or left, like turning in to a driveway, I get an awful binding grinding noise, and I can feel it shimmy in the wheel. It will even stop the car going hard right. I can see evidence of rubbing on the CV boot closest to the wheel on the pass side. I assume I messed up somewhere with setting the steering when I installed the Tie rod ends to the wheel hubs.
View 19 Replies
I just rolled 100k in the 337. Time to do some refreshing. 2 noticeable issues (non-motor related anyway )
1 - sometimes when turning hard left to right, or vice versa, I hear and feel a "cluck", almost like the something is shifting.
2 - I've got a creak from the front (and I think maybe the back too) when I get out of the car. Sometimes I hear it when I slowly go over a bump as well.
3- I think my rear shocks are on the way out.
In the last 15k I replaced both the inner and outer tie rods. That's all I've done to the suspension.
View 7 Replies
I have a 2004 Honda CR-V, 100k, just did its 90k maintenance (a little late) and also had the ball joints replaced. Brought back from the mechanic and heard clicking sound when turning wheel hard left or hard right, only at low speeds, usually when parallel parking or simply sitting in park, turning wheel back and forth. Right back to the mechanic: they checked it out, re-lubricated everything, drove it, said it was OK. I got it home, still clicking. Safe to drive this weekend? It's back to the shop on Monday.
View 1 Replies
'08 F350 6.4l 4wd, I had the truck come in with a exploded transfer case. (See pics). Ive read all about this happening to many others. The truck still drove, hubs not locked, plenty of fluid in the TC, pretty sure it was the double Cardan that did it. Anyways I replaced thwith TC, replaced the front driveshaft, filled the TC with recommended fluid. Test drove and drives great, shifts fine. Only until I turned left.
At slow speeds turning hard or 15-20 taking a turn, it sounds like a ratchet clicking from somewhere on the left side, right around the drivers door, from what I can hear from the cab. Does it in 2wd, 4wd hi/low, hubs locked or not. I changed the vacuum pump, no leaks, changed the IWE solenoid, pulled out both locking mechanisms, tightened crossmember, checked everything from the hours of research I did on the internet. I cannot find the problem. I don't know what else to check. Front axles free spin and lock when they are supposed to. I'm at the end...
View 6 Replies
First off my trucks a 2000 v10 f250 with four-wheel drive and 2 wheel abs with about 230000 miles on it.
I Recently replaced my unit bearing on my drivers side because I thought it was the cause of a grinding that only happens on hard left turns but I wasnt the cause it was going bad causing play in the half shaft. I didnt seem to notice and wear on the shaft from bad needle bearings but I have to take it all apart again to be sure. Was just wondering what else could be the cause of this noise. I plan to pull the axel shaft and change all the seals.
View 3 Replies
So I've noticed that the R sometimes makes a heavy clunk when turning 90 degrees at any speed. I probably heard it once every couple of weeks, but I never investigated. I finally asked a shop to take a look at it, and it turns out the dealer never removed the shipping spacers.
Apparently these are placed on the car to minimize the stress of shipping via sea and road. I imagine I'll get a little more transfer out of my suspension, making potholes less jarring. Is that a fair assumption?
View 10 Replies
I've gotten it a couple of times lately while turning at slow speed. The first guess is always the CV joint/boot - but wouldn't that be multiple pops?
View 12 Replies
As the title states, I am getting a weird click from what seems to be both front and back when going over bumps or turning slow. Thinking it may be sway bar bushings or something like that, but not 100%... Its also not your typical blown CV boot click either, its more like something is flexing and hitting into something...
View 6 Replies
2005 GTI 1.8T 5spd 97k
Pretty much every time I back up and turn, I hear one loud, single pop from the front end. Occasionally, it will happen when I start forward from a stop (if turning) but that's it. It never happens at any other time. I can't decide if it's suspension or steering related. Where could this be coming from?
I have gone through the front end thoroughly and the only issue I find is my passenger inner CV boot has begun to crack and has lost some grease. I would expect a CV failure to click anytime I'm moving and turning. Again, I never hear this noise under any other circumstances.
View 19 Replies
Installed a new OEM CV axle on my 05 GTI the other day because I had been having a lot of issues with off brands and then today (I'm a delivery driver) on a run I was turning into traffic from a stop and I heard a clunk and then no power. The engine was still running flawlessly, but no power driver to the wheels.
I'm not going to be able to get a good picture until we get there but I'll upload pics when I get them. The bracket looked completely f'd. I could only find two of the 6 bolts that hold the CV axle in place and one was snapped in half.
View 24 Replies
Just purchased a brand new 2012 GTI Autobahn. I can't notice the AFS headlights swivel left to right at slow speeds but at start up seems to work when I turn on the headlights. Is this normal? I had the dealer check it and they said it works fine. They tested it through their laptop and it works but I can't seem to notice the swivel when I steer the wheel.
View 11 Replies
Just did pretty much the whole front end suspension on my GTI. struts, bearings, mounts. control arm bushings. ball joints, tie rod ends. sway bar bushings and end links. Drove across the country and a clunk showed up. (most recent work was sway bar links and bushings).
I get a pretty hard clunk, usually when the right side goes over a bump (not always), and sometimes when the whole front end goes over a bump. Sounds like it is coming from the right side. You can feel it in the floor sometimes.
I went to the metal end links, maybe they are no good? I figure it's either them, or the axle on that side is binding sometimes. Boot on axle is fine though.
View 2 Replies
