Golf V R32 :: Putting On Wheel Adapters


Mar 31, 2008

how bad would it be to put adapters on the r? i want these wheels, and unfortunately, they don't come in 5X112. when I wanna bring the car to the track I can always run the stock tires

View 11 Replies

Advertisement

Subaru - Forester :: Shaking Steering Wheel And Seat After Putting New Tires

I have a 2002 Subaru Forester with 201,000 miles, it runs great. However, I just put new tires on and I have terrible shaking in both the steering wheel and the seat that was not there prior to the tire change. I went and had them balanced and the mechanic suggested it was maybe a mechanical problem because there is still some shaking. This shaking is also very pronounced when I hit the the brakes but I am pretty sure the brakes are fine because I changed the the entire front brakes, calipers included and the rears last spring. Again, this car is pretty high in mileage and I am pretty sure much of the front end is stock from the factory.

View 4 Replies

Ford 7.3L Power Stroke (1999-2003) :: Ball Joint Remover Tool - Adapters?

I'm looking to add a ball joint press/remover to my toolbox. Which one? Do I need adapters?

[URL]

Although I usually make my own tools, it is getting cold here quickly and LOTS to do before winter. I have the front drivers side parts ready to go on, but a tool like this could be very useful ..

Would this work on our Excursions/Superduty? Do I need any other adapters? Is it heavy enough for a couple of vehicles? Not running a shop, but have E350, my Excursion, and now F550 to do. Hence the tool "need" ...

View 14 Replies

Golf/GTI VI :: CEL After Putting Stock Downpipe Back On

I Put my stock downpipe back on while having a CEL... never got the stage 2 flash. I can t reset the CEL it keeps coming back on. Do it will reset itself eventually or do I have another problem? It is the cat code I forget the number.

View 8 Replies

Golf IV / Jetta IV :: Stays In First Gear On Hot Days While Putting In Neutral

My issues: when I'm on gear 1 for example, on hot days, and only on hot days ( 25 deg.c and more) when I put it on neutral it suppose to go at "home" position ( i think this is how you guys call it, like align with the 3rd gear) But it stays align the the first.

Same with all the gears. It's stays aligned with the gear I just left.

View 3 Replies

Golf IV / Jetta IV :: Wheel Leaks From The Area That Connects To The Wheel Base

I bought these wheels last summer from ECS Tuning - Alzor wheels for my Jetta. I haven't driven too much on them since I was deployed to Afghanistan for 9 months. I've been home 4 months. I think I have about 10k miles on them. The issue is that now one of them leaks. I took it in to be checked, thinking it was the tire. There is no rock rash, I haven't hit anything. The wheel leaks from the area that the spoke connects to the wheel base. There is no visible sign of a crack at all so I don't know what the heck is up. The paint looks fine from the spot it leaks from.

View 4 Replies

Golf IV / Jetta IV :: Bad Wheel Bearing Cause Steering Wheel Shake?

I have a bad wheel bearing but on the highway my steering wheel shakes. It is only on the highway not down residential streets. I'm pretty sure it is the driver's side wheel bearing. I already balanced my wheels and everything.

View 5 Replies

Golf V R32 :: Steering Wheel Rattle Irrespective Of Positioning Of Wheel

Noisy steering wheel. It doesn't matter where I position the wheel, I'm hearing clatter when going over bumps or when putting pressure on the wheel. It has no effect on steering. I think it's coming from somewhere inside the adjustment mechanism. I figure the dealer will need to take a look.

View 7 Replies

Prius (Gen 2) :: Putting Into B Mode

What is EXACTLY going on when the Prius is put into B mode ?

View 12 Replies

Passat (B5) :: Putting A Climatronic System In The Car

I have a passat B5 2.3 VR5 with aircondition and I have been thinking about to build a climatronic system in the car I did have a climatronic in my old passat B5 V6 TDI and I was so happy about it, The refit part are not the hardest thing, but what about the wiring part? do people rebuild their own wiring system, or is there made a wire kit to the climatronic system.

View 4 Replies

Mustang :: 1998 - Why Blower Is Not Putting Out Air Flow

I recently changed the blower motor and blower motor resistor in my 98 Ford Mustang. Why my blower is still not putting out an air flow?

View 2 Replies

Prius (2004-09) :: Compressor Went Out Because Of Putting In The Wrong Oil

I have a 2008 Prius. In 2009, I got into a collision, and the car required extensive body work. This week, I took my car to the mechanic to repair the air conditioning system - only warm air was blowing out. According to my mechanic, the compressor went out because the auto body shop put in the wrong oil in the air conditioning system and re-installed the fans backwards. I got my car back today, and the air conditioning works really great!

However, my family spoke to their mechanic (different person from my mechanic), and he indicated that used compressors are dangerous due to the high likelihood that contaminants will be leaked. This sounds completely ludicrous to me. My mechanic said that the other mechanic's concerns are unfounded.

View 12 Replies

Prius (2010-12) :: Powering Off Without Putting Car In Park?

Is it very bad to Power off before putting the car into Park? It seems to go into Park upon hitting the Power button automatically.

View 19 Replies

Prius (2004-09) :: Car Would Not Go Out Of Neutral After Putting It In Park

After getting on the highway, the red triangle of death, the amber ABS and the VSC lights came on, and little exclamation point came on on millage/audio screen, while battery power went down from high blue to one blue bar. Pulled car over to parking lot, and put in park. After putting it in park, the car would not go out of neutral, but the power still worked.

View 15 Replies

Pontiac - Grandprix :: 2002 - Air Conditioner Putting Out Hot Air

Hottest day ever on Planet Earth and my air conditioner in my Pontiac decides to throw hot air in my face! Luckily, for my female companion, she gets ice cold air. This 2002 Grand Prix 40th Anniversary edition has 236,000 miles, I never once had a problem with the air conditioner in the past (have thought about contacting GM asking what they did right in this car)This model has dual climate control. I noticed that in turning the selector knob on the dash climate control panel, there is hot air in the vent, bi-level, heater and defrost, but cold air comes out on the passenger side. The interior temperature functions are all similar on the '97 through '03 models of Grand Prix, just wondered if this is something I can fix, or do I need to visit a Pontiac dealer to have it diagnosed (and spend a lot of money)

View 3 Replies

Touareg :: 2004 - Putting Headlights Back On?

I've replaced my headlights. the problem is putting it back on. I twist to a lock, but the headlights get loose in a couple of days and it needs to be tighten. I don't want to twist too hard in case anything breaks. Is there a way to adjust the headlight to ensure it being lock? I know I'm suppose to hear like a loud click when it's lock.

View 6 Replies

Prius (2010-12) :: Putting Into Neutral Before Park?

Dealer advised the following procedure for parking car:

1. Come to a stop, foot on break
2. Put car into Neutral, make sure Neutral is lit up
3. Then press the Park button.

They said this is better for transmission. Didn't see a mention of it in the manual, and have no problem doing this. Or are you just coming to a stop and then hitting the Park button, skipping the Neutral step?

View 19 Replies

Grand - Caravan :: 1998 - After Putting OBD P1698 Came On?

My service engine soon light came on and the guy at O'reilly's put the OBD-II on it and P1698 came up. This has something to do with the TCM not communicating with the BCM or some such thing. I have been searching all over the web for P1698 and it seems to be usually associated with dash lights and gages being intermittent. Our gages are intermittent but right now are working fine. They say they fix is to take the instrument cluster out and resolder the grounds to the main connector. That seems to get rid of the light and the P1698 code.

But if P1698 is that the TCM does not talk to the BCM, how does the cluster get into this?

I guess my real question is what do I do to get the light to go out and the code to go away? Resoldering the cluster just doesn't ring true with this code description, but on the other hand, the description is not much clear either.

View 5 Replies

Ford Excursion :: 2002 - Heat Not Putting Out

2002 with 7.3 and Auto Climate Control...When the engine temp is at normal operating temperature, there is minimal heat coming out of the floor (on floor setting) and then when I turn on the rear heat there is almost no heat at all. Both fans work properly. I noticed when I turn the temp setting all the way down and then back up to 90* I can get what feels like 65-70* out of the front. Again, almost no heat on the rear. I still need to check the hoses to see what's happening at the heater core. I'm thinking it might be the controller, but not sure how the ACC plays with the rear controls.

View 13 Replies

Ford - Explorer :: 1999 - Putting New Radiator?

Putting a new radiator in and need getting the old one out. I have it loose but can't get the condenser free of the radiator. About ready to plug in the sawsall. The 2 tabs on the drivers side will not come out.

View 11 Replies

Caravan/Voyager :: 1998 Dodge - Putting A New Tailgate On Car

I'm about to put a new tailgate on a 98 Dodge Caravan. I got hit in the back and I bought a new back door at the junk yard. It looks pretty easy, but I thought I would touch base here and there are a couple of potentially tricky parts...

Does that wire bundle have a block somewhere that you can plug, or am I going to be splicing them one by one? (I don't have power locks. I have windshield wiper, back door inside light, license plate light, heat wires in the glass.) The other tricky part..changing the lock.

I think that's all.. the bolts and star screws look pretty straightforward. I got it used with 48k miles a couple years ago and I only have 75k now. It was a government car.

View 5 Replies





Copyrights 2005-15 www.bigresource.org, All rights reserved