Golf V R32 :: Possible To Change The Direction On The DSG Shifter?
Feb 3, 2011
This is my first DSG car and I find it un-natural to push the stick forward as I am accelerating then pull it backwards to downshift.
I feel that I would prefer to pull back when accelerating 1-2-3-4 and then push forward as I am decelerating 4-3-2-1...
Is there a way to modify the direction with Vag-Com or other?
View 24 Replies
Advertisement
I looked back through the DSG threads and didn't find anything regarding the direction in which you manually up shift using the stick shifter...towards the dash. This seems odd to me because if you are accelerating, your are forced into the seat, moving away from the shifting direction. The natural shifting direction would be towards the back. And vice-versa for braking and down shifting situations. Or is it just me. Can reverse the shifter to up shift towards the back?
View 9 Replies
It is the little handle that allows me to change the direction of the air coming out from the cabin vents. Two of those little handles have fell off recently and I can no longer move around the direction of the air flow unless I stick a pen or something in there.
What is the name of this part ?
View 7 Replies
I was out driving tonight and our 03 escape started making a thumping sound like you hear when you have a flat. I turned the corner and noticed that the steering wheel is now at a 30 degree angle as I'm going straight and when I hit the brakes the steering wheel straightens out but the car doesn't change direction. It's dark so I can only see so much but the tie rods are good and tight from what I can tell same with ball joints. They just did that subframe recall a month or so ago. My concern is steering box but other than these symptoms it seems to be working fine.
View 4 Replies
How to change the Shift Assembly on a 2002 Toyota Prius.....This is the only car that I have now and I have to get it going before school starts.
View 4 Replies
I have to replace my gear shifter and have the new one alread an OEM part could some one point me to illustrative instructions on how to change this basically it's the top part which you press to shift from park to drive, reverse and so on.
View 2 Replies
I recently changed the bushings and installed SS kit. I don't know if this was the case before, but now while in any gear, i can still move it approx half inch to the right and half inch to the left.
I checked everything and all screws are tight. Could it be that the shifter cables need adjustment?
View 24 Replies
2005 GTI 1.8T 5spd 97k
Pretty much every time I back up and turn, I hear one loud, single pop from the front end. Occasionally, it will happen when I start forward from a stop (if turning) but that's it. It never happens at any other time. I can't decide if it's suspension or steering related. Where could this be coming from?
I have gone through the front end thoroughly and the only issue I find is my passenger inner CV boot has begun to crack and has lost some grease. I would expect a CV failure to click anytime I'm moving and turning. Again, I never hear this noise under any other circumstances.
View 19 Replies
I'm looking for pictures of the front xenon headlights with white direction indicators and the way how to do this modification .
As the picture below......
View 12 Replies
My dsg shifter feels tight from p to r to n etc. I have a torque mount insert. That is not related correct? Just wanted to know before I bring it to the dealer and have them replace the shifter.
View 4 Replies
So i was driving home from work yesterday and out of no where i couldnt get the shifter to get over to 1st or 2nd gear. i had to wiggle it around and push down on the shift knob and it eventually went over. Happened a few more times yesterday and like twice on my way to work today. It feels kind of sticky or something, not really moving as freely as it used to. What could be causing this?
View 6 Replies
Okay, my shifter rod got spun, and now it doesn't want to go into any gears. Just freely kinda swirls, and you can't push down. The guy working on the car wants to pull the shift box down and see what is going on. He thinks the shift cable or selector cable is broke.
View 5 Replies
The car came with a EIP Short Shifter. It is short, but seems to be having some problems. Is it normal to feel like I have to really try and get it into gear? I like being able to shift and not "muscle" it in.
I don't know how to put it. It takes so much effort that in a "track" scenario I do not see how this could even be used. Does that make sense?
A bigger a more worrying problem is that on high rpm shifts (5k+) 3rd gear will sometimes grind unless I REALLY slam dunk it in.
This is keeping me from really "driving" the car. My damn Volvo sedan could be romped on harder. It didn't fight me. Is this some crazy EIP thing?
View 24 Replies
The issue with the car is that the tranny won't go into any gear. With clutch in or out. I had very little play left or right or up and down. Not sure what could be wrong. The car has 120k miles and no mods.
View 2 Replies
Out of nowhere the car wont go into 5th, so I need to check the cables adjustment and if that doesn't work go from there. This car as of now is nothing more than a daily driver, never driven hard. I bought it last June with 40k on it and as of today it sits at 68k. Happened Friday worked fine on the commute to work, but on the way home once I got on the highway I noticed it would not engage 5th. Does not grind, pop, or anything. It is like the shifter goes into 5th but the cable has been shortened to not engage. This may be the issue but reverse, and 1st-4th work great with no issues.
I also read about the narrow oiling holes for the 5th gear and they are very easy to starve when temperatures get too low, which it has been roughly 0-15* here. I also read that the seal on the transmission gear shift unit (0A4301230H) can get worn out and allow back and forth play in the shift unit. Lastly the 5th gear is pretty weak and teeth like to shear off.
I had installed new shifter bushings the week I bought the car, and the fluid was flushed and replaced with Liqui Moly and their MoS2 additive about 5k miles ago. I'm hoping it is just the cables out of alignment due to the cold, but if not I will explore the options, as I have priced out all of the replacement parts and it'll be around $1k to replace the gear, 5th synchros, shift fork, and the gear shift unit. So a 02Q might not be out of the question.
I tried to manually pull up on the selector and move it right into the 5th position. Would not engage, so I am lead to believe that something is either wrong with the selector shaft of the transmission or the 5th gear itself.
View 1 Replies
Ok so I was putting a drill bit into the home slot under the shifter boot. I didn't realize it was so deep and the piece dropped all the way down the hole. Is this bad? If so, what can I do to get in there and get it?
View 5 Replies
I recently noticed a rattling coming from my intake manifold and with little research I discovered it was the intake shifter rod. I ordered the new updated bushings and installed them today and the rod continues to rattle just as bad. My car only has 90k and I am unsure what to do to fix the noise. I am hesitant to order a whole new shifter rod because it could be the manifold itself too worn. I am just curious if there is anything that I may have overlooked or if there is anything I can do.
View 4 Replies
How do you remove the shifter box from the center console for the 5 speed mk6? how do you drop it out of the car?
View 1 Replies
There is only one DIY i can find that is still alive. I have a megan short shifter. Its already half way in. I just don't have any instructions and i am kind of at a loss as to where i go from here. Does this shifter change the way my reverse gear will be engaged? I mean will i need to pull the trigger up to go in reverse or will i still push down? Does the spring that came with the kit go under the sleeve or above it? Sounds confusing.
View 3 Replies
I have the 20th anniversary GTI with the 6-speed manual at 90k miles
I have the Dieselgeek Short shifter installed so for the most part my shifter is nice and tight/precise. However, I have some play in the shifter while it is in gear and I understand that this is normal for a car as it ages. But I assumed that the Dieselgeek would've solved all the gear slop in my shifter, and I was wrong.
So is there a part I can replace to tighten it back up?
View 18 Replies
When the car is in gear it's great! Or at least it seems great. However, trying to place the Shift Lever in the car into the gear "slots?" is troublesome.
It feels as though there is a wall in the way for each gear, and i have to force my way through the wall. It's not absolutely Terrible, for i've been driving like this for months. But i want a smother shift! I want to be able to just slide the Shift Lever into gear without any hangups or major resistance.
Double Clutching seems to work, however it might just be from the small loss of RPMs through the process of double clutching.
Personally I would rather not have to double clutch just to see a slight improvement. I have big feet and they constantly are rubbing on the floor mat as well as the plastic above the pedals, so double clutching always feels like i'm wedging my foot into a hole, then back out and in, before i can go into another gear lol.
The problem is only a real issue when i'm in higher RPMs giving the car more gas. I.E. after a fast launch in first, shifting even around 5500 puts a WALL up on second gear making it impossible for me to get it into second gear, after not getting it into second i usually throw it in third, and essentially lose all the acceleration i had from the first gear launch.
As well is there anyway to make the clutch a little stiffer? She grabs fine, i just like stiffer clutch, it requires less of me trying to wedge my huge foot on the pedal.
It's an un-molested MKIV Jetta VR6 with 167k.
View 10 Replies