Golf V R32 :: Passenger Headlight Bulb Melted Into Igniter - Blast Control Defective?
Sep 29, 2015
So a couple weeks ago my passenger headlight started flickering. After a couple days the bulb was out. I bought a new bulb and opened up the headlight to install and found the bulb melted into the igniter. Ok, bought a new igniter. Installed everything. And still nothing. Checked the fuses and wires, nothing loose. Headlight still didn't turn on. Went to my mechanic and he said it's the ballast. I buy a new ballast and he just called and said the ballast I bought was defective. The light was turning on, but no high beam.
Does the ballast control the high beam? If it's not the ballast, what could be the problem?
View 2 Replies
Advertisement
I was changing standard halogen headlight bulbs last night and as I was getting the drivers side bulb out the metal part came off with the bulb and I noticed the black plastic part of the socket was partially melted. Sketchy. Far as I know these bulbs have never been changed I bought the car w 3500 miles back in 06. Is there anything I should do besides replacing the melted socket? A part # would be awesome too...
View 2 Replies
Unfortunately my HID bulb wasn't secure in the headlight assembly and melted the part that holds the bulb in place in the headlight assembly.
My question is if that part that retains the bulb is replaceable or I will need to replace the whole head light assembly? ( The wire connector is fine.)
If the part is replaceable, What is the name or part #...
View 6 Replies
About a month ago I replaced both of the main headlights in my Gen 3. I've noticed since that the light from both seemed a little skewed and thought maybe I didn't lock them back in fully. i finally checked them today and was able to get the left side light straightened out, but when I went to check the right hand (passenger) side one (which isn't working again), i realized that it must have come out.
Essentially the light bulb is shattered/exploded and it melted part of the cable next to it, and is now stuck to that cable. Besides being partially melted, the cable also has some exposed wires. i don't know what those wires do, but I can't imagine it's a good thing to leave it exposed next to a live circuit from the headlight.
See the attached picture. What that cable is that melted and if it's possible to replace it myself, or do I need to take it in?
View 9 Replies
01 Passat ... The small black square plastic piece that connects to the bulb of my headlight has melted and wanted to replace it. I just don't know what the part is called.
View 1 Replies
My passenger side headlight bulb stopped working, neither in high or low beam. Does this point to the ballast being the issues? I've never dealt with HIDs before so not really sure of the common problems.
View 2 Replies
I am having a lighting issue in my ex with my passenger side headlight. when i first purchased the vehicle last august the headlight burnt out. i replaced it no big deal. it worked just fine for about 6 months and i have now replaced the bulb 3 times since. the last two times the bulb worked for about 20 minutes then went very dull. Now nothing. when i pulled this last bulb out saw a charged/burnt look to the vehicle side of the plug. What is going on and how i can fix it?
View 3 Replies
My passenger side headlight was out so I replaced what I thought was the offending bulb, but the light still won't turn on. The parking light turns on fine, as do all the other lights. I really don't want to hear that I have a wiring issue which would require a trip to the shop.
View 5 Replies
I just replaced (or almost replaced) the bulb on the passenger side of my 2008 prius. It is a HID bulb. I got the old one out, the new one in and connected and verified it is working. Now trying to get the cover back on that provides the weather proofing and unless im wrong... the braided wire that connects to the back of the bulb is in the way. It looks like it has to go thru the opening that the cover is supposed to seal... Imagine a rope hanging over the edge of a bucket you are trying to put a cover on... Am i wrong here? did I miss something?
View 1 Replies
One of my headlights burned out.
I was looking at ECS and saw ES#1059.
Just want to make sure that this is the right bulb.
View 4 Replies
About a month ago i installed the rear fog in my 06 TDI. I used all the proper stuff ( VW wire, 1156 bulb)
Well yesterday i finally got to use it while driving on the interstate during the reminisce of tropical storm Barry. well all remain good until i stopped off at the mall with my wife, got back in the truck and proceed back home when MFI prompts me to check lights and little icon lights up... well today i check it and its the rear fog. The bulb had melted into the red lens and exploded.
View 3 Replies
I recently melted (due to my own ignorance) the backshell that holds the low beam light bulb in place. I can see that the backshell is removeable since there's it looks like there's 3 screws that hold it in place. The headlight would have to be baked apart, but I already know how to do that. My question is: is there anywhere that sells this part, or does the housing assembly have to be bought whole? I was also looking at the spyder lights that claim they are projectors, but I'm wondering how they compare to regular OEM output. This is for a hybrid btw
View 1 Replies
My drivers side headlight bulb went out a few days ago and I haven't had the time to get a replacement. Any DIY's or tips for changing them out.
View 8 Replies
So I bought a set of Phillips XTreme Vision bulbs for my GTI VII S. Problem is that I cant seem to open the rear housing of the headlight on the drivers side to gain access to make the switch. The gearbox is right behind and there is barely room to get my hand back there. Is there some trick I am overlooking?
View 3 Replies
I have a RX330 and recently noticed that both the RH and LH outer tail lamps bulb sockets are melted.
View 2 Replies
This just started happening a few days ago. The right bulb will turn on normally with the rest of the car, but as I'm driving it will randomly turn off for a second, then power back on. Some nights I won't see the issue at all, other nights it will be doing this every other couple of minutes or so.
View 10 Replies
2002 Jetta, how do you remove the cover over the blinker bulb on headlight? There is a rectangular black cover with a tab at the top. I have tried everything, short of breaking it off, to get the tab to release the cover. What is the trick?
View 1 Replies
The other day my passenger headlight went out. Today I went to replace it, after much frustration I pulled the bumper and the headlights. I first tried swapping ignitors to see if that was the issue. I went to switch the ballast and now nothing is working except for the passenger high beam. I made an apportionment with the steelership. But I wanted to see if there was anything I maybe able to do to avoid this.
View 1 Replies
I bought a 2002 Excursion 2wd V10 at an auction with 105,000 miles. I've been working through the little problems and I'm down to one last small item.
The cruise control will not work. I found a thread to diagnose the problem. My diagnosis is:
After doing the self test I received: 3 flashes - deactivator switch is open or circuit defective.
What does this represent and what shall I do to correct it?
View 11 Replies
I have a 2005 limited with 45000 miles. It sits in the garage most of the time. A couple of days ago I went shopping and I noticed the area around the passenger airbag was shiny. I could only see it when the sun hit just right. I wonder if it is the defective dash.
View 2 Replies
Is there some way I can fix this? The car is brand new and the passenger headlight has a leak somewhere.
View 10 Replies
