Golf V R32 :: Oil Filter Housing Socket Size?
Nov 28, 2008
What is the proper socket size for the oil filter housing?
View 2 Replies
Nov 28, 2008
Advertisement
Golf IV R32 :: Air Filter Size?
just recently purchased an R32 and wanted to know which filter size the r32 uses ? i have never changed a stock filter before because i have always had a cold air intake but have decided to keep the stock air filter on this one.
View 10 RepliesFord Transmission :: C6 Band Socket Size?
Some folks swear by a 5/16 8 point socket, of coarse I dont have one, so I want to make sure b4 i buy anything. Looking at adjusting the 2nd gear band on a 72ish C6 ... As you know its a square end bolt, I dont own the correct square end socket either, so any direction would be groovy
View 1 RepliesFord F-150 - 1997-2003 :: 2wd Spindle Nut Socket Size?
Want to replace the rotors on my '97 2wd truck. What size socket do I need for the spindle nut? Can't seem to find that information with a search. I popped off the dust cap and test fitted a couple of sockets after removing the cotter pin and cap that locks the nut in place. 1" too small, 1-1/16" a little loose, so I'm thinking this nut is metric and I want a 26mm socket?
View 3 RepliesPontiac - Bonneville :: 1987 - Socket Size To Remove The Drive Axle Hub Bolts?
What size socket I need to remove the driveaxle hub bolts from this car? I can see the bolts are considerably larger than the socket I have for my Ford Tauruses, and I would like to eliminate the guess work before I go to carquest to get the proper socket. Unfortunately bringing the car to the store and trying sockets until I get one that fits is not an option, since the car is not running right now.
View 3 RepliesFord Super Duty (1999-2016) :: 2000 - Socket Size To Remove Lug Nut?
What size socket is used to remove a lug nut on a 2000 F350 4X4?
View 6 RepliesFord Super Duty (1999-2016) :: F250 - What Size Socket For Center Bearing Replacement
1999 F250 CCSB Lariat 5.4, 2 wheel drive. I plan to replace the Driveshaft Center Bearing in the next few days. What size is the Nut that I have to remove to remove the yoke next to it so I can press the bearing off?
View 4 RepliesPassat (B5) :: Size Of Stock MAF Housing On ATW 2000 1.8T?
I'm thinking of making a custom short CAI for it and want to know what size coupling I need to get to fit the stock MAF housing...
View 4 RepliesPassat (B7) :: 2012 - Cracked Oil Filter Housing
I'll be back to post the whole situation if the dealer doesn't make right on what I'm going through right now, but wanted to ask as I didn't find much searching, any issue with a cracked oil filter housing? I took car in for 30k service and came back leaking oil. Apparently part is back ordered and may take weeks. I spoke with ECS tuning and they said they don't have their aluminum filter housing yet for this model.
View 12 RepliesCamry :: 2010 - Lip Off Of Oil Filter Housing Broke?
I have a 2010 Camry and on Friday I got my oil changed at a local shop and while there the guy told me that they broke the lip off of the oil filter housing that I need to get a new one from Toyota before my next oil change. Said not a big deal right now but do before next change. My first mistake was paying for the oil change and not making them replace the housing since they are the ones that broke it. Well that night I drove about 150 miles and the next morning I drove 75 miles my car started making a odd noise when I would accelerate but not while I was just cruising. Then is just died while I was pulling into parking spot. Started it back and died again and just kept dying and not stay started. I check the oil and the stick is bone dry. There is oil all over everything under my car and had to pull it home on a trailer. Obviously the filter leaked all of it out, but my oil light never came on. Question is do you think there is damage to my motor? Do I make the oil changing place replace my motor so if it did damage I don't have to pay for it in a few thousand miles?
View 4 RepliesVolvo :: Fuel Filter Housing Cracked On XC90
My fuel filter housing has cracked and i need to replace it. I have been told by volvo that i need to have it programed is this true or not ???
View 1 RepliesCorolla / Matrix 2009-13 :: 2012 - Oil Filter Housing Will Not Come Off
I am trying to change the oil on my dad's 2012 corolla LE, and this is the first oil change since it's been out of the 25k mile service plan. I ordered the exact 64mm 14 flute wrench and the filter housing WILL NOT unscrew. I have looked at several videos online and I am sure I'm going the right way. I have tried kicking it, hitting it with a rubber mallet... and nothing! My friend has a breaker bar we are gonna try to use in a little while... Is there any history of dealerships sabotaging this kind of thing so you have to bring it back?
View 3 RepliesPhaeton :: V8 - Coolant Leak Coming From Area Under Oil Filter Housing
I have a coolant leak coming from the area under the oil filter housing where the cooler is. My thought is the little plastic pipe between the cooler and the engine block. I have the alternator removed but am wondering what's next. Can I get to the cooler without dropping the engine?
View 24 RepliesCamry :: 2009 - Engine Air Filter Housing Vibrates Heavily
How to remove the engine air filter you have to unscrew the front and back of the housing? Yeah. So I'm missing the back bolt AND the metal/silver thing that holds it in place. The dealer told me they don't sell the part separately and I'd have to purchase a whole new unit ...
Additionally, the engine air filter housing vibrates heavily. It's not due to the above and what's causing it. It's vibrating so much I'm almost afraid it's going to damage other parts.
This is a 2009 Camry LE 4 cyl.
Ford F-150 (2004-2008) :: Oil Filter And Housing Did Not Match Stock
I bought a used 2006 F150 Lariat 4x4 (5.4L) and discovered that the oil filter and filter housing did not match stock. All web searches return the fram filter ph2 but the truck had the equivalent of ph10575. It was the right filter for the housing so it's not a case of someone putting the wrong filter on the truck. The ph10575 filter is for model years 2010 - 2013. Should I start investigating whether the engine had been replaced or is this normal?
View 6 RepliesFord Excursion :: 2001 - Fuel Filter Housing Leaking
I could smell fuel so I popped the hood to look for a leak. On top of the filter housing cover fuel was puddled in the little nooks and crannies of the black cover and some had leaked over the side into the valley between the heads. Is this a common leak? How in the world did fuel get on top of the cover but not on the hood insulator cover?
Also, just bought this not too long ago and the po said he had just done the fuel filter service on it. The gasket seemed pretty flimsy and weak and didn't really fit the gasket surface. Although I'm used to my cummins powered trucks and they use a o-ring to seal the housing cover. 2001 excursion 7.3
Prius Plug-in 2012-15 :: Cabin Air Filter Replaced - Housing Clip Broken Off
Not sure if there is a post for this, but I could not find one.
I recently replaced my cabin air filter in my '12 PiP. When I went to put the little door back on, the clip that holds the door into place on the left (not the "click" side), broke right off of the housing.
I have the piece, but not sure I can glue this back on with any success.
Do I have to take the whole dash apart to get the housing out to replace? It really is the smallest little plastic piece.
Ford 6.7L Power Stroke Diesel :: Lower Fuel Filter Housing Broke
This past week my wife and I took a short trip and returned on a gravel road. I went to start my truck the next morning and there was a puddle of diesel fuel on the driveway. When I looked under it, I noticed that the tip of the fuel filter housing is gone and is leaking slowly from there. I called the dealer and they would not fix it on warranty, the truck has 20k on it. The service man said he would not turn this into ford. I've had the similar problems with this particular dealer. It's obvious that a protective cover is needed for this. I kept the part and am thinking of sending it to ford.
View 13 RepliesFord 7.3L Power Stroke (1999-2003) :: 2001 - Fuel Filter Housing Leaking?
I have a 2001 f250 7.3l 4x4 and the fuel filter housing is leaking real bad from either the back or under it. I need to get info on parts that i would need as well.
[URL]....
Ford 6.0L Power Stroke Diesel :: 2003 F550 - Inline Trans Filter Housing Seized
I went to change the small filter that is mounted just behind the radiator and is inline with the 5r100 . with a socket on the bottom all i was able to do was flex the brackets going to the 3 mounting bolts as this thing is on there real good. Looking for examples on unthreading the bottom cup to access filter?
View 6 RepliesFord 6.0L Power Stroke Diesel :: 2005 F250 - Leak Appears To Be Coming From Secondary Fuel Filter Housing
I've got a leak that appears to be coming from the secondary fuel filter housing (the one in the engine compartment)... It's not coming from the filter, but from the side, where there are 4 allen bolts that attach a fitting to the side of the housing...Can I change out the gasket for that piece? I've already tightened the bolts, but the leak persists.
View 14 Replies