Golf V R32 :: License Plate LEDs Went Haywire - Dim Light
Mar 26, 2013
I ordered an LED interior package from Deautokey and they also came with license plate LEDs. The interior looks great, the license plates looked great except for one thing, the right side was slightly yellower than the left. So I contacted Deautokey and they sent me two new ones:
These are identical to the original LEDs except in the old ones the squares are arranged in a diamond pattern but I don't think that matters.
Tonight, I was replacing the right side LED hoping that replacing one is all I had to do to match colors but in order to see better I kept the plate lights on. Well when I went to pull out the housing I forgot that they were still on and pulled it out anyways, there may have been a noise when that happened but I forgot.
I put the new one in, turned the plate lights back on and found that it was dim, I rotated it and same look. I tried the second replacement, equally dim, so I thought "okay, I'll just give up and put the old ones in." Did that and they are now these ones became dim!
What happened!? Did pulling it out while it was still on (only did it that first time BTW) mess something up? Did the new ones being in there mess something up? There is no warning light or message in my instrument cluster.
View 24 Replies
Advertisement
Any LED I can throw in the footwells / license plate area that won't throw a code? I'm using the ones from superbrightleds.
They worked everywhere except the license plate and the footwells. Everytime I get in my car I have to see (check license plate lights!) and a bulb out icon.
View 10 Replies
I wanted to change my license plate bulbs to LED's. Can't figure out how to get to them. The book says have the dealer replace these bulbs if burnt out. I Always like to try to do things myself.
View 7 Replies
Combo of interior and internal LED bulbs. What particular bulb type to get for my MAP lights and license plate lights.
This was suggested by V-Leds for my license plate... [URL] ..... What do you think?
They did not suggest any for the MAP light, I'm thinking these are the ones... [URL] ......
View 2 Replies
So I noticed a few days ago just one of my license plate bulbs blew, so I tried throwing another in and it won't light up. If I check for 12v at the housing and I have 12 where do I go from there? 2005 golf 2.slow
View 1 Replies
So, I was attempting to install license plate lights rather impatiently in a parking lot the other night at my weekly meet. I pulled out the factory lights, put in the LEDs, reconnected them, turned them on and all systems were go. I shut the lights off and at that point went and screwed the license plate light housings back into place and went and turned the lights on again, and they were not working, at all. I then decided to reinstall the stock bulbs and check it out, and they were not working at all either. So I haven't gotten to dig too much on this at all, but the headlights and taillights still work so I know it isn't the switch.
Plans for Tomorrow: Pull the light housings back out, take photos of everything, make sure all electrical connections are clean and looking good, and then try to get to the bottom of it.
View 16 Replies
So I took my GTI in for my 10k service and to have them fix the wastegate rattle and the subframe shifting. They fixed the wastegate by installing the clip but didn't have the shims in stock for the subframe so I need to go back anyway, but I'd really like to fix my license plate lights before then.
Is there a possibility the tech could have accidentally unplugged a cable for the lights when he was rotating the tires or messing with the wastegate, etc? Maybe a blown fuse? I'm running LEDs and I already tried putting the incandescent bulbs back in but they don't work either.
View 5 Replies
I'm in the process of replacing license plate bulbs. I broke the old housing for one of the bulbs so I bought new LED lights on eBay and they came with the housing. The problem is, I can't get the cover to stay clipped in to the tailgate. How to get the lights to stay in? What am I doing wrong?
View 7 Replies
Where i can get my hands on a Fukengruven license plate frame?
Any pics of the Platypus tow hook mount on their car?
View 16 Replies
I have vagcom and led bulbs in my gti. I turned off the plate light monitoring erased the code and get errors for plate lighting short and the 2 bulb errors. When I put the stock bulbs back I still get plate lighting short error on vagcom but no bulb warnings, why that's happening even though all the lights turn on and function fine?
View 6 Replies
One of my light bulbs for the rear license plate light is out.
what kind of light bulb I need to get?
View 8 Replies
How to change the license plate light bulb for lexus rx 350 2010.
View 4 Replies
I found some threads about changing the license plate light on a 2009 Hyundai Accent and all of them involved removing the plastic trim inside of the hatch. However, I saw a few people mention that they broke a few plastic clips. I want to prevent breaking any clips.
Also, this ( hyundai-forums.com/184-mc-2006-2011-accent/94825-2009-accent-replacement-bulbs.html ) thread says that the replacement lights for the license plate are 168 or 168LL, but other posters say that they replaced them with white lights. What code are they?
View 4 Replies
I have an intermittent error that comes on most of the time I have my headlights on, but sometimes goes off and comes back while I am driving. It shows me the bulb out light, and says on the screen "Number plate Check license plate lighting!" I have never touched the oem factory bulbs on the license plates, and if i get out and look at the plate, both lights are on over the plate.
The only change I have made was about a year ago, I installed an LED bulb in the trunk, and ran a second OEM trunk light in the left side and installed an LED bulb in that too, tee'd off the factory trunk light housing. But like I said, that was 1 year and 30,000 miles ago, and my bulb our error for the license plate has only just started, so I doubt they are related.
View 3 Replies
License plate light comes on when any door opens? it fades out a little after it's shut. stays on for a minute or so. (like interior lights would if i had the door dome switch on).
Any way to turn this license plate light off for this function? stays on if the hatch is open, or any door. I car camp a lot and crack the hatch for air. license plate light stays on.
Also the lower door lights, when they are individually open. I'd like them to not come on. Yes I could just remove those bulbs.
I had installed led lights on the whole car/ every bulb inside and out. even fog lights. i didn't replace the hid headlights, though I'd like to.
View 11 Replies
No tail, turn, backup, flasher, license plate - NOTHING. i checked fuses - cleaned both connectors under the truck by drivers door, cleaned connectors by the spare tire (2) one large one and one small round, the cleaned ground lug on top of spare tire bracket, all bulbs are new. cleaned with LPS contact cleaner, they were new and shiny and reinstalled. NOW - turn is very weak and when i push on brake they go off and the front blinkers blink twice as fast? I a aircraft technician and know my way with an ohm meter but totally stumped.
View 8 Replies
I'm having some sort of electrical malfunction on the back of my Mk4 Gti. The right rear tail light, license plate light and back windshield wiper doesn't work. I replaced the bulbs several times and they keep blowing.
View 2 Replies
How to change license plate bulbs? The little clear covers dont seem to pop off ........
View 3 Replies
Was trying to remove the licenses plate screws today. One comes out easily, the other won't budge. I've sprayed a couple of times with WD40 but its still stuck.
View 14 Replies
So I bought LED license plate lights, the same ones Track5tar has (who sent me the link to get them). I got em off the bay, and I put them in and they don't work! The Heatsink gets hot but the lights don't light up in both of them!
View 24 Replies
So I was replacing the lights with the new leds change one toke some pics to compare. Everything fine...
Removed the other feston put the new led and they won't turn on anymore..
Change them back. Put them upside down, up, sideways... Nothing
Check all three fuse boxes all ok
Every other light on, inside trunk on, side markers on...
Everything but the license plate lights.
View 12 Replies
