Golf V R32 :: Car Idles After Window Switch Blinks
Dec 27, 2008
So today i start my car and the idle was funny for a few seconds, checked to make sure there were no vacuum leaks, everything seemed fine. Then im sitting with the car in park waiting for someone and I feel the funny idle again. It stops then i notice only the light in the window switch blinks on and off about 2 times then the funny idle again.....normal for a minute blinkity blink funny idle....see a pattern. I noticed for the past 2 days the auto down for the pass. window doesnt work either. I wonder if they're related. It hasn't happened again but i haven't drove it much since that happened. Im going out now so when i get back ill update. Ill scan it on monday to see if it threw any codes.
View 6 Replies
Advertisement
I just bought myself a MKIV .:R and it is outstanding. Im slowly getting it up to my spec. The driver side window switch doesn't like to work to roll the left window down. The double down feature works great but not the momentary part of it. All I can find are switches for the 4 door.
View 10 Replies
My drivers door window switch no longer does the one touch operation. Yesterday I rolled the window down and it wouldn't come back up. After driving around for a while with the window down, I was successful in getting it to roll back up. This was after several repeated tries and shutting the car on and off. Does this mean I probably need a new switch? Is this a somewhat common issue?
View 3 Replies
So my car is just under 2 weeks old. I had the car tinted today and now the drivers side window switch will not operate the passenger side window. The switch on the passenger side works fine and the window operates perfect. The drivers side window operates perfect.
The tint guys are still out there trying to fix this. There isn't some locking mechanism that could be preventing this correct? Or did they somehow short the switch out only on the passenger side switch? So aggravating.
View 3 Replies
My GTI has 300 miles on it, just noticed that the auto up/down function on the driver's side window switch only works sometimes. You have to push or pull hard on the switch to get it to auto open or close. I'm assuming it could just be a faulty switch?
View 9 Replies
My passenger window won't roll up or down from driver's switch, I know it isn't the window itself bc it rolls up and down from the passenger door switch and if so how did you get it fixed?
View 2 Replies
I have a problem with turn signal. When I switch it on it blinks one or two times, and then stops. It is for both directions. Where might be a problem? The switch or relay?
View 4 Replies
I have a problem with my golf 4 window. RR after washing it the window wouldn't go up again it just made a grinding noise inside but no movement when you press the switch, I watched a few videos on how to open the panel and I did and found this wire lying around like this I don't know what to do from here as the car must go for a test for registration and they check the windows. do i need to buy the entire back panel?
View 2 Replies
I have a 97 xlt fully loaded. Have been noticing once and a while the battery drained enough not to start. Have been attributing it to my son not turning off the dvd player in the back. I was wrong. Went out this evening to pick up company van, and the truck was dead. When i reached in to unlock the door, i accidently pushed on the power window switch and the window rolled out....key was not in the ignition. It quit when I opened the door.
View 1 Replies
I have dismantled my trunk completely in order to install rear upgraded lights, as well as to install a new bumper to my kit. I have not put back the interior of the trunk yet. I went to let the top down so I could begin to remove the rear seat to do the mod to the subwoofer that a fellow forum member recommended and provided an instructional. But the top will not come down.
I was able to raise the top and the windows. But when I push the button to lower the top the red light to the switch blinks but nothing happens. My question, do I have to reassemble tyne trunk in order to lower the top. If that is the case how is everyone doing the woofer and amp work with the top lowered.
What I really want to do is lower the top partially so I can remove the rear sear set (top) so I can get to my subwoofer. Or maybe the seat can come out without lowering the top.
View 10 Replies
Have a 2001 Prius going strong except for the ac. The button light blinks on the ac switch, and the compressor seems to shut off. But some times the ac works fine.
I brought it into the dealer and they said I need a new compressor.I think it's a temp sensor, otherwise, why is the ac nice and cold and can stay on for some period before going off.
View 13 Replies
my 2001 cavalier overheats only when it idles, overheats in 3 to 5 minutes & the ac blows hot. As soon as you get moving again the car runs at normal temp and the ac blows ice cold. We changed the thermostat, coolant and belts, i'm not loosing any coolant. Looks like the fans are not coming on, I can not find a location for a fan relay switch, thought maybe we should change that before changing out the fans..Is there a relay switch?
View 8 Replies
I recently noticed that one of my windows doesn't go all the way down when I use the switch. I try auto down as well as holding the switch down until the window reaches the bottom, but no matter what, the window won't go down as far as the others.
View 7 Replies
I try the passenger window side switch and it doesn't work but the driver side switch does work for the passenger side. I got a new switch but it still is not working. I did take the child lock off already
View 20 Replies
I own a Passat-07, i need to change the window lift switch on the driver's door. The black color on it has fall of.
My question is how to remove the cover ( so i change the switch. Can't see any screws or clips.
View 1 Replies
I have a 99 Camry le 4door car. I recently bought a new motor and regulator. Reason being is the old one quit working one day. It rolled up just a little at a time then stopped before it closed completely. So I plugged the new assembly in to the harness and nothing. All other windows have power coming from the driver side cluster, door locks work fine as well. Passenger front window will do nothing from either switch.
View 1 Replies
The power window on the passenger front side will go down using the switch on that door, but, I have to put it up using the switch on the driver's side. What is happening?
View 7 Replies
My front passenger window switch seems to have died. Where is the easiest/cheapest place to get one right away?
1996 1500LT, window works fine when I use the driver door switches.
View 5 Replies
I have a set of OEM HID's. I noticed that thesignal lights blinked in double time when I had them installed. Only one of the signals out of the two in each headlight blink however. A friend told me that the reason the HID's had 2 blinkers per headlight is because the HID's are so strong they require both signals to work to overcome the headlights. For those of you that have OEM HID's, do both your signals work? Being that mine don't, do you think that is the cause of my signals blinking in double time?
View 12 Replies
I just tried to lower my passenger window, and it was completely dead. Driver's side works fine. Tried both the switch on driver's side and passenger side. Neither worked to lower passenger window.
Popped the hood and swapped out Pass & Driver's fuses. Pass side fuse is ok - ran the Driver's side ok.
Dropped the top and both windows ran down and back up ok. I'm guessing connection in driver's door(?). Maybe that switch for passenger window is bad?
View 4 Replies
I purchased a 1985 celica GTS, convertible, rear wheel drive. I am having a problem with the drivers side power window. I can raise and lower the window with a direct 12v battery hook up to either the lift motor or from the terminals that connect to the switch. The switch will lower the motor but not raise it. When activated to raise the window you can hear the motor enterguise but will not lift. I check the voltage at the switch and I am getting 12 volts. What should I check next?
View 3 Replies
