Golf V R32 :: Broken Brake Light / Windshield Washer Stream The Shot Straight Up
Dec 7, 2010
I've got an '08 R32 I bought in May, before that I had an '07 GTI, so I know the cars pretty well. I have a couple of issues with the R that I never had to deal with on the GTI .
1. On my GTI, the rear windshield washer was a very strong stream the shot straight up. On the R, I've noticed it is weaker, and recently, it barely sprays half of the area, and it also moves with the wiper, from about straight up and over to the left. Any adjustment to tighten it back up, or if it is supposed to move.
2. I just had a brake light burn out Monday. I know I need to get behind the plastic and undo the nuts to remove the brake light assembly, but I have two questions: First, what are the make and model of bulbs used so I can pick some up to change at home.
View 7 Replies
Advertisement
My neighbor has a 1995 Kia Sportage that is overheating...he said the last time it got hot a stream of water shot up onto his windshield. He has been unable to find a leaky hose, etc. Could this be the head gasket?
View 1 Replies
I recently purchased a 2003 Explorer. Two weeks after I bought it I found out the motor on the windshield washer water pump was shot. The dealership fixed it for free. About a week after I got it back when I was driving in the morning to work I noticed the check gauge light go on and saw that my temp gauge was pointed at HOT!! I pulled over and stopped immediately. As soon as I slowed down the temp gauge went back down to normal. It happened 2 or 3 more times and had it back at the dealership. They are stumped. They sent it to a Ford dealership and they couldn't find anything either.
They said they have checked everything and it is not overheating. They even put a thermometer on it while they drove it and it didn't get over 205* I am surprised it didn't do it to them because it happens almost every morning. I only work 4.3 miles from my house so its not like I am driving very far. It usually happens at about 3 miles. As soon as I see it going up (and I watch it a lot!!) I take my foot off the gas and start to slow down or barely press the brake it goes right back to normal. Then it stays at normal the rest of the day. Is it the sensor or the wiring or did the do something to it when the fixed the washer motor?
View 10 Replies
During the removal of my hood. I've broken my fluid line for the windshield washer. Not sure how to replace or if this is able to go back in my hood, I've searched and have fallen short to a decent answer.
View 4 Replies
Windshield washer fluid light is on but reservoir is full.
View 8 Replies
Does this car have a sensor/light for a low windshield washer fluid warning?
View 8 Replies
So i need to replace my windshield washer reservoir because i hit something/bottomed out really hard under my front lip which cracked the reservoir along with the horn, and a few plastic pieces in that area. Any DIY on replacing it? It seems like i need to take off the bumper cover and then it should be straight forward... I already have the lower grille off so i can access the reservoir just not seeing how its mounted...
View 3 Replies
i have a 2010 vw gti 4dr, reservoir is full, they worked yesterday but not this morning. they didnt work yesterday morning but when i checked in the afternoon i saw that the hood liner was blocking them and was saturated with washer fluid. i removed it, and they worked fine. now this morning no dice...
View 3 Replies
My rear windshield washer has stopped working, does the MkVI have a separate pump for the front and rear washer fluid sprayers? My front sprayer is still working, fluid is full, and I don't see any VCDS codes relating to the rear windshield washer motor. Since I am approaching a wet season, it would be best if the rear washer worked. I am still under warranty but just wanted to know if there are two sprayer pumps on our cars.
FWIW, I have not had a problem with the rear washer dripping and no TSB have been performed on the rear washer.
View 1 Replies
2014 Sport bought new with 2400 miles is showing the yellow warning light that the level is low when in fact it's full. What the problem is so when I take it in for it's first oil change this week I could explain better to the service department. This is my wife's car.
View 5 Replies
My washer fluid leaked out of the bottom of the reservoir and I would like to pull the fuse because it keeps beeping it is low. obviously. I do not have a rear wiper as it is shaved so #27 fuse is out and I was wondering if I pulled # 24 if that would stop the damn sensor or if I can pull something else, maybe just unplug it from the reservoir. I find myself using it never so I wont be fixing it anytime soon.
View 1 Replies
To me it sounds like a windshield washer sprayer trying to squirt w/o any fluid or a print head moving and hitting the end and try for a brief second to keep moving. I notice it when I first turn on the car and it is about every 8 ish seconds. Tried to capture it but it is too faint to pick up on cam. 2011 Gti, 39k
View 8 Replies
So my windshield washer fluid sensor popped on a couple of months ago, checked fluid (was full), I concluded that it was a failed sensor. I ordered a new one from ECS, put in last wknd, and finally: the low-level warning light disappeared. A few days later, I was adding some fluid into the reservoir (it was a new bottle and had no funnel) and I spilled a few drops. The spilled amount seemed to drop near the sensor plug, but didn't think it was a big deal. Went into work, came out later to head home, and you guessed it: the low-level light came back on (with a FULL reservoir).
I removed the plug yesterday, blew it out, but it didn't change a thing. Anyway, is it possible the sensor shorted because somehow some of the fluid go into the connection? If I hookup the vagcom, will I be able to tell if there is an issue (I know it didn't before when the first sensor failed). Is there even a fuse for the fluid sensor?
View 10 Replies
Has encountered a strong odor of washer fluid when using it on your windows. I was driving to work this morning through a snow storm and needed to use my washer fluid for the first time. As soon as I turned it on the entire cabin was filled with that smell. Could this be a leak?I thought it was all confined within the engine compartment so not sure why I smell it immediately upon using.
View 14 Replies
Can swap a 98 Toyota Camry auto tranny to a 96 Camry with the same size engine? Sometimes the axles are different (splines) so if the axles are changed also then the tranny will work. But the axles and tranny all have to be switched?Driving down the road at about 65 mph there was a clunk, a binding like brake stuck thing going on, and then the tranny would not move the car. It seems as though the chain, if there is a chain in the tranny, broke. Someone told me it is the gears (planetary) on the right hand side of the transmission that drives the axle. No one including me has gone under it to look. But I do have access to that 98 tranny and axles.
View 15 Replies
I was driving around and I got a low oil light flashing and it turned off straight away.
So I checked my oil. When I first removed the dipstick it shows full, wiped it clean and put it back and it showed empty.
I put have a bottle (small one can't remember size) of oil in. I drove around parked waited a bit, and it does this same thing.
View 18 Replies
The visor no longer rotates past the straight down position toward the windshield. It works fine rotating to the side window and down from its storage position to the straight down position. The passenger visor still works properly. Any fix or should I just order a new visor from the dealer?
View 2 Replies
The windshield washer does not work. What could the problem be? I thought I would check the fuse. What fuse is for the washer and were ls it loc? is it under the hood ? or could it be the pump and how would i check it ?
View 7 Replies
My trip to Gillette WY was OK but the windshield washer froze up and did not work the entire trip. So much for a snow car, but now, in warmer climate, only the drivers side will spray...nothing at all out of the passenger side. I looked up the system on Ebahn 92-32 but it just shows how to remove the tip. How to replace or check the hose? Or, even better, how to direct heat to the washer system to keep it from freezing up?
View 4 Replies
The wire pulled out of the back of the connector on the harness side... I know I could just cut the connector off and hard wire the thing together but I would like do do it as cleanly as possible...
View 1 Replies
2003 Passat B5.5.
Every time I refill the bottle, the next morning I always find the fluid under driver's side bumper on my driveway.
View 3 Replies
