I have 22000 miles and this never happened on the car before wonder if it has anything to do with the recall, had the fuel system recall done about 200 miles ago. Other day after fueling car wouldn't start, also new "feature" to this car. Hope the recall didn't do something bad, I tried to reset it by reseating the cap, but warning comes on as soon as I drive it.
View 4 RepliesCar: 2003 Jetta VR6 GLX 24V
Sometimes when I start up my car ( I want to say when cold, but I haven't tried after its warm yet), the coolant light and warning come up. I obviously checked the coolant, and it is a little low. But it's been where it is since I bought the car, and I haven't noticed any leaks. After I turn the car off then on again the light goes away.
The car is running perfectly fine, it's not running hot or cold. Another thing I have noticed is that my fans don't seem to be working. ( I know it's a common problem). But I'm thinking this could be the fact that it's below 0 today.
I haven't gotten it scanned yet, but what's going on; i.e., Thermostat, sensors, fans etc..
Quite literally just received the buyout agreement yesterday. My wife went out this morning to leave and the car turned over a couple times but wouldn't start. I went out and tried it and it would turn over, the engine would (pretty violently) bounce, but wouldn't start. The 4th or 5th try (as you see in the video below) started. Turned it off and tried again and just click, click, click. Seems like a classic case of a dead battery? Not seen a GTI react so violently to having a low battery before though...
View 4 RepliesOn my way to work this morning check engine light came on, diagnosis came up with 2 codes p2181 cooling system and p1516 intake changeover. went to leave work car started then died after about 5 seconds then wouldn't start. as of right now I am thinking that it might be the coolant temp sensor? That's not letting it start? the past week it has been getting bad gas mileage and a low idle.
Mods done giac chip now set at stock setting
APR exhaust and intake
107,xxx miles
Just as I was talking up my 03 jetta with 250,000 miles to a buddy, it developed a problem. It started to take a while to start, and wouldn't rev over 3000 while driving. (like all the other posts, would just die at 3k). So, I installed new Crank and Cam position sensors. Started up...a little stumble...running. Take it for a drive and able to rev over 3k rpm. Now it just spits, sputters, dies, stumbles.....push in clutch, engine dies....???? I know i will have to probably take it to VW for them to check it out....
View 6 RepliesMy car wouldn't turn start today at school The ignition would "click" continuously but the car wouldn't turn over. Battery is fully charger and didn't start with a jump either. Alternator issue??
Anyways, me and a buddy tried to push start it in 2nd gear a couple times with no luck... is this even possible with our cars?
Today, after making a few stops at local stores, I tried starting my car and it wouldn't start. It sounded like the engine did turn over once, but would stall out immediately. I ended up calling a tow truck, but when he showed up an hour later, the engine started first try. Except now the engine light was on.
I should note that a friend was watching my car for last week while I was out of town and she said she had no issues with the car. At first I thought maybe she forgot to put the gas cap on, but that's not it.
My wife drives a 2002 Golf 2.0L with about 214k on it at the moment. It runs really well and I'd like to keep it that way. Last week she told me that the car wouldn't start sometimes and that she would hear a buzzing noise when she turned the key. If she turned the key off and then on again the car would start. The problem was occurring more consistently as time went by and sometimes she would have to try to start the car four or five times.
I took a look at the car and her description was correct. The 53 relay under the dash was buzzing once the clutch was depressed and the key was turned, but the car wouldn't start. I took out the relay and put it back in and the car started fine. I swapped it with the other 53 relay in the panel (dual horns), and started the car a bunch of time with no problem. Then I gave the car back to her to drive to work. Everything was fine for a while.But now the problem is starting to return.
I was driving today and my cruise control light came on and wouldn't turn off. i vagcom'd the car and a code came up which was:
Cruise control switch (E45): Implausable signal
P1569 - 35 - 10 ---- Intermittent
I tried clearing it but it would but the light remains on. I noticed that when i hit the RES button on the stalk, the light goes away and when that when I scanned the car and held the RES button the code would come back. My cruise control also stopped working.
My '05 Sante Fe 2.7 doesn't want to start after fueling up. I have to hold the accelerator pedal down, like we used to on the old rods when we flooded the engine, to get it to start. I replaced the gas cap thinking that was the issue, but didn't fix it. I get no check engine light and with 340k miles, it sent out several codes a while back at the dealer. Could it be the fuel filter or pump?
View 2 RepliesI have a 2007 Suzuki XL7. About a year ago it started having trouble starting after fueling. Every time you put fuel in the vehicle it would take a few times before it would start. We've had it to several mechanics. They replaced the gas cap and did a few other small things. Nothing worked. We took it to have it diagnosed on the computer 3 different times (twice by the dealer). They only tell us that there is something with the timing sync code. The vehicle now has 190,000 miles on it.
Recently, it's started to act up more often. As the car warms up and is used more throughout the day it becomes more and more difficult to start. It has also had a few instances where you would get it started and you push on the gas and it won't go. This problem is getting increasingly more frustrating. I've talked to my regular mechanic about these issues and his belief is that it is some sort of fuel issue.
Unfortunately, he is more of a backyard mechanic and doesn't have a computer to diagnose it. I recently took it to yet another mechanic and have gotten the runaround by them. The man there told me he would get me an estimate written up with an explanation of what he feels is wrong with it. It's been two weeks since then and I've called a dozen times with no luck. Mechanics are truly frustrating to me. My friend said, call Car Talk, so here I am...desperately hoping you might have a clue as to what is going on with the vehicle.
My 2004 Santa Fe doesn't want to start after fueling. It doesn't matter whether it was just a few dollars worth or a full fill up. After pumping the gas and recapping securely, I have to press and hold the Accelerator to get it to catch. I had the purge control valve replaced a few months ago. And my car started mourn normally for a while. However I'm back to having to push progressively harder on the gas pedal to get it to start after gassing up.
View 5 RepliesProbably 20k ago the check engine light came on and was related to the "purge" valve as best I can recall, every mechanic I took it to kind of blew it off as just an emissions thing and not really necessary to fix. so whatever just let the light stay on as the car ran identical to before the light came on.
Fast forward to a few weeks ago and my wife was filling up between classes and after she was done and went to start it, it would turn over but wouldn't start completely, luckily a guy there pump the gas and revving it out as he turned it over. then it ran perfectly fine afterwards, started up perfectly after every time....until we got gas again.
Took it to a local guy a few people I know used, told him about the check engine light and maybe the purge valve thing had finally gotten bad enough to need replacing (this was my guess after some internet digging for the same issue), he troubleshooted and came to the decision to replace the front o2 sensor. Ok I said, your the mechanic not me, do it. did it and next time got gas....same thing.
he had it for another 2 days and "couldn't figure it out", refunded me completely for the o2 sensor & labor, while throwing in the towel today. Next up , Hyundai dealership I suppose. Car is throwing NO CODES whatsoever now, have put several hundred miles on since new o2 sensor.
While he had it he had to replace the master brake cylinder. So that's new as well. I've had to replace all the coils already between 75-85k they started acting up one by one so I said screw it and did them all.
OH and another problem is the airbag light has been on the dash for about the last 6-9 months as well.
The car has just over 111k on it and I've about had it, bullshit problem after another and another. What's next??! I've owned probably 7-9 cars in my life and nothing has given me the aggravation of this car.
Cliffs:
1) car won't start when putting in gas
2) starts if you rev it up for a short while, then will start every time afterwards til next fuel up.
3) o2 sensor is new
4) no more check engine light, no codes, yet still have issue
5) car is starting to wear down my patience with repairs
6) if not a cheap fix, bye bye Hyundai
The car doesn't struggle to start at any other time just when fueling. I have a 2011 Accent and I am looking for the locations of the various components involved so I can test them to see where the problem is.
I know the purge valve is mounted on the rear of the intake manifold below the air hose. Now is the solenoid and the valve the same part? I see various diagrams pointing to the valve and labeling it solenoid. The other part is the EVAP canister. I know it's some place near the gas tank but not sure where and I can't find any diagrams online.
I am comfortable with minor repairs. I've replaced spark plugs and ignition coils and a purge valve before so would this repair be something I could do myself or would I be better off taking it to the dealership?
2007 Santa Fe, hard to start after fueling up, after that one time it cranks fine until I fuel up again.
View 1 RepliesThis is weird, im having problem starting the car just after filling up my tank, this is the third time it happened to me, i have the engine light on, i want to scan it but im unable to cuz my abs module is bad, i drive a 98 passat 1.8T, Just clarified I'm only unable to start the car right after I fill my tank aftert that the car starts with no problem
i always use SUPER, the only way to start it is while turning the key hit the gas pedal making it go brum brum lol. But like i said i only have difficulties starting the car right after fueling after the car starts the car is fine, it starts every morning untill i visit the gas station again...
My car is a 2007 Hyundai Santa Fe GLS and does not want to start only after fueling. It will also die when the fuel cap is removed. There is an excessive amount of vacuum pressure released when cap is removed. The computer showed a code: P0441 Evaporative Emission Control System Incorrect Purge Flow. Is this simply a fuel cap issue or something else?
View 5 RepliesAfter getting to about 1/4 tank, I fuel up and fill the tank but when I try to start the car, it cranks for a while and then finally starts. It will idle really low so I have to rev it until the engine starts getting gas at a steady pace.
View 9 RepliesI'm having an issue with my 08 Accent GS. It is very difficult to start, but only after fueling. Any other time, the car starts without any problems. I have tried to simulate the issue at home by taking off the gas cap and replacing it, but it didn't have the same result.
View 8 RepliesHave 2000 V70 station wagon, non turbo. After filling it with gas it start only after pumping the gas pedal repeatedly. Than runs rough for 30seconds or so. Than runs great till the next fill up. Removing the gas cap doesn't cause the same problem. CEL is on. Code says gas/vapor recovery system has a leak.
View 3 Replies2001 Ranger 2.5L
Mom was driving the truck and tried to fill it with gas, but it only took around $6 or $7 before it cut off. After that, she tried to start the car but it would not fire. It cranks but does not start.
It was towed to a mechanic where it started fine multiple times. The mechanic then took it to a nearby station where he put $10 and the same no-start happened. I don't believe he had a problem fueling it. He's trying to determine what is causing it. Later the car will start fine and will start repeatedly.
I do not know anything else about the no-start condition, fuel pressure, spark etc. It just has happened twice now right after fueling. Plugs and wires, basic maintenance is up to date. I believe the truck has around 125K.