Golf V R32 :: 2014 - RVC Back Up Camera Won't Working?
Oct 20, 2014
Okay so I've got the RVC hooked up to my 2014 RCD-510 with the input for the RVC, only when I put the car in reverse, a message appears on the screen and the emblem camera doesn't open. I've tried coding in vagcom but I can't use the navigation settings since it's not a RNS-510 so there is no nav option. I checked the rear view camera under 56 Radio but that still didn't seem to work. What I can try to get it working?
View 13 Replies
Advertisement
So when I got my car a couple months ago there was this problem where the backup camera wouldn't come on every now and then when I shifted into reverse so I decided to get it fixed under warranty. the dealership said the problem had to do with the whole infotainment system or something so they gave me a whole new center console and navigation screen for some reason but after I got my car back a couple days ago it was working fine up until today where the back up camera won't even come on at all anymore. I've driven the car about 5 different times today and the backup camera never came on once.
View 3 Replies
I have a 2011 F-150 Super Crew and have had to replace the back up camera due to a malfunction. Once the dealer replaced it under warranty I was no longer able to get all the options that the previous camera had. Since then the 2nd camera went bad and I just had it replaced again. This new camera still is missing 2 of the options the original camera had. The dealer now tells me that they must have been deleted off the software on the replacement cameras. They were unable to verify that through Ford though.
View 6 Replies
I have a problem with my Backup reverse camera, actually my tiguan not bring it with camera backup and I install and change the radio for rcd 510 bosch with backup camera port,
View 6 Replies
Does the Ford emblem/camera just pop off the tailgate with a screw driver? Pry from top or bottom? I'm trying not to break anything here. I removed the tailgate panel inside and can't get any access there.
Both the camera and reverse sensors have quit working. I'm troubleshooting both but I'm not sure they are related. The camera died first but worked sometimes after slamming the tailgate. Sensors quit sometime after. Don't really care about the sensors but the camera is essential for hooking up the trailers.
I was hoping the wiring from the tailgate to the plug would be cut but that doesn't appear to be the case. I'd like to check the camera itself next. Ohm it out or something, I don't know.
View 4 Replies
Issues:
1. Backup camera sporadically does not come on in rear view mirror. Has already been replaced by Ford dealership.
2. Backup camera settings Visual Park Aid and Guidelines sporadically are set to 'off'
3. While truck is running, start seeing warnings/hearing chimes. Emergency Brake (which isn't set), Engine Overheating, Check 4X4, etc.
4. Truck will NOT start. Won't even attempt to turn over. When this happens, I have a radio but the LED screen is usually blank.
These sporadic issues are starting to seem to be related to the use of the emergency brake. Use of the emergency brake does not always immediately cause issues. Now that I feel like there is some kind of connection, I have been setting the e-brake when I park it (even if not needed) trying to force things to happen because Ford says if they can't make it happen they don't know where to look/what to fix. I can't always make things happen by using the e brake...but am noticing things happen more often when I DO use it and when things happen (like backup camera won't work) setting the brake will make it come on and then I can release it and back up. If it won't crank while the brake is set, releasing it will cause it to crank. The other morning when I had all the warnings/chimes going off setting the e-brake made everything go back to 'normal'.
Yesterday when I came back from lunch I parked and set the e brake (on level ground). Got in it to leave work, left e-brake set, stepped on regular brake and tried to crank....nothing but radio. Called dealership. They had me try putting the key in, pressing the regular brake, and try to move the shifter from Park to N. Shifter wouldn't move. Then asked to turn key to just get it 'active' and try again. Shifter wouldn't move. Asked me to turn the key to crank and try again. Same thing - shifter wouldn't move. Truck finally cranked after I released e brake. Came home, parked and set e brake and turned it off. It re-started right up with e brake still set.
View 14 Replies
The backup camera under the vw logo staying open. Mine takes at least 10 seconds to close, and if I don't wait and turn off the car, it will remain open which prevent you from opening the hatch. It's become extremely annoying, especially Christmas shopping in the rain!!
View 11 Replies
So I completed the install of the OEM reverse camera with ECS wiring harness. I followed the wiring diagram, tapped into power at the back of the head unit according to this thread but nothing works. Neither the hatch lever nor the camera. I have to open the hatch manually from the inside.
I double checked the wiring diagram and everything is correct. I also plugged the old hatch wiring harness directly into the new camera by bypassing the ECS harness, and afterwards the hatch lever actually works... however, with the wiring harness installed, with the old hatch wiring harness inserted into the ECS wiring harness, the hatch lever does nothing.
Does the handle need power to function?
Did I tap into the wrong location for power? I was going to use a fuse tap, but couldn't get the fuse tap to plug in so I used the head unit. Where did people tap into for power? Did people use the red/white wire at the back of the head unit? I redid the connection with a simple twist joiner but things still don't work.... I also ran a new power line through the car to see if that would solve things. So is my problem:
1. faulty wiring harness
2. improper power supply
3. faulty camera unit
4. other.
View 9 Replies
Something strange happened the other evening while driving. I'll just lay down the facts: I picked up my kid from class. When we got in the Prius there was a song I turned it down kind of fast.
It had rained earlier and there was a puddle at the curb. I slowly went through it and into traffic and accelerated. The music stopped and I looked at the display. The back up camera was on and I was looking at the road moving behind me. It flashed a few times then went black.
I pulled over and turned off the car. Turned it back on and all has been OK since. Just weird that it would do that all by itself.
I didn't "blast" through the water.
View 2 Replies
what turns on the back up camera,, the computer, the back up light relay or the transmission selector?
View 1 Replies
I've got oem navi in my touareg 4.2 and am wondering if it is possible to retrofit a back up camera to the oem screen ?
View 2 Replies
I just installed a back up camera - great picture clear day and night but the problem I am having is the guidelines on the camera don't line up with the side of the car, the driver side seems fine but the passenger is around a foot short, I have mounted the pavement twice so far.
View 1 Replies
I have a 2006 Prius with a Back Up camera, but I am not sure if it is just a back up camera or if sensors are suppose to make noise if i get close to another car. Is there suppose to be a sensor in the bumper or was it not included?
View 1 Replies
I'm looking to install a back up camera. When hooking up my boat trailer or backing into a space in a parking lot. Would a factory piece be available? (rearview mirror)....
View 1 Replies
I got the ivic system installed in my car today and I am pleased thus far with the little bit that I have played with it. The only problem that I have is my back up camera is not cutting on. Why?
View 2 Replies
In my 2009 standard prius, the back up camera often, maybe 50% of the time, is just black. It has some scrolling look, and sometimes i can see a faint image of whats there. The warning text on the screen is still there, and I am positive the is plenty of light, and nothing blocking the camera.
Its almost as if the TV rabbit ears need some adjustment. Flickery images, images literally scrolling left to right, etc. Other times, its perfect. Where do i start? loose wires somewhere?
View 2 Replies
Just purchased 2010 lll w/ Nav and backup cam. Although the cam works fine it doesn't show a grid. I drove a 2008 w/ cam and that did show a grid. The salesman stated some camera's did show it and others don't.
View 5 Replies
My backup camera stopped turning on when I put the car in reverse. Why? I'm thinking it might be a fuse issue, but I can seem to figure out which fuse from the information in the manual.
View 9 Replies
I just purchased a 2011 Escape to live with my 7.3 Excursion. I want to install a BU camera in the Escape. The mirror has wiring to it, do not know why.Can I use that exiting wiring? What was it for and where does it go?
View 1 Replies
Having issues with the back-up camera? It only works about half the time. It either stays on the radio or gives me a black screen. I called the dealer and was told they have not gotten any other complaints
View 1 Replies
I have a 2011 regular cab XL, and I just installed a Kenwood DDX770 that has a backup camera connection. I am installing an aftermarket camera. I would like to use the wire from the stereo and connect it to the steering column wire for reverse, but can't seem to locate it. I read other places that it is a black wire with a pink stripe, but I can't find that color under the dash.
View 3 Replies
