Golf IV R32 :: Popping And Clunking Noise From Passenger Side Spring / Mount Area
Apr 7, 2013
I had the struts replaced a few months ago along with the strut mounts and bearings. Since then I've developed a popping and clunking noise from the passenger side spring/mount area. I've greased it and it has quieted it down but I noticed that when the car is not moving and I turn the wheel from lock to lock that very top piece of the strut pretty sure it's called the hat moves along with the wheels while the drivers side does not. What's wrong? Is it something as simple as the nut being to lose or to tight?
View 3 Replies
Advertisement
This noise I have is driving me crazy, installed neuspeed race springs and now I have this weird spring noise, sounds like the springs are binding and then releasing when you turn the wheel, like a clicking dinging noise, it's on both sides and happens when moving slow and turning the wheel and when stationary and turning wheel, it sounds like tug and release not really spring bind I checked install and everything is correct even disassembled bearing assembly and everything is fine, lubed spring seats with silicone paste nothing is working.
When looking at the spring and turning wheel it's almost like the spring is getting stuck on the middle part of the seat then releasing, I know this was a common problem on the mk6 but I haven't heard anything about the mk7 the spring is seated in the lower perch perfectly the upper is were the noise is coming from you can see as you turn the upper bearing by hand it actually somewhat twists the spring and then releases and that's what makes the noise, and it dose not move in a nice circular motion kind of like an egg shaped rotation and it makes the spring flex and pop I think there's a problem with the springs,
View 5 Replies
I'm getting some heavy clunking from my passenger side wheel area, when I move the wheel side to side. I am almost positive it is the ball joint.
View 19 Replies
While driving, the drive side door makes a creaking/clunking/rattle/popping noise. Its so damn annoying. It's all the time, if you roll the window down it doesn't do it as loud, but its cold out..
View 24 Replies
Almost every single time I put my .:R in reverse and the car starts moving I hear a popping noise with pauses in between each pop. I think it might be a ball joint and the noise is coming from the front passenger side.
View 18 Replies
So I installed my H&R lowering springs about 2 months ago and I am very happy about the stance, ride, and handling up until about 2 weeks ago. The car always had a bit of a spring clunk coming out of the driver's side strut tower, but it has become more apparent and pronounced over the last few days. I already tightened the strut nut and shock tower bolts, what else is there to check out?
View 14 Replies
I drive a 2013 4 door gti. Car has 4k miles. Just last weekend myself and my buddies threw my coils in. FK Silverline X plus'. I am not sure on the measurement from fender to ground but I am a finger gap in the front, and fingertips in the rear. After throwing my coils in on saturday, I had an alignment and the rear camber adjusted. Just today, sunday, while driving home I heard a weird clunking/knocking noise. Previously I drove a mk4 and I know the sound of sway bar on axle and this is not the sound. Its coming from the passenger side front.. and I can sort of feel it through my clutch and brake. After pulling the car over I checked everything I could. wheels are all tight, struts seem fine. The noise occurs continuously even on smooth roads. The knocking/popping is pretty loud and can be heard in cabin. My buddy had mentioned the guys the aligned my car might have forgot to tighten something so I am heading back to the shop first thing in the morning.
View 3 Replies
Setup: WRD Street Advantage Coilover kit. Installed and sit at 24.75" all around. 034 Density mounts and new bearings. 19,xxx mi.
7 weeks ago I installed WRD Street Advantage coils. The install went great, no problems. Drove a week or so and decided to replace the strut mounts with 034's density strut mounts and new bearing to get rid of the creaking sound at low speed. Ordered them and put them on this weekend. After driving it I realized the creaking of the old weaker strut mount was gone. However, I inherited a rough clunking or knocking sound (as if something is loose and moving around), which seems to be coming from my passenger side. This happens at all speeds and not specific to turning the wheel. I unistalled/reinstalled everything in the front 4 times and went through everything with a fine tooth comb, but can't find anything loose. All bolts are torqued to spec.
I even removed the sway bar end links and drove it, still there. So it's not the end links. I also tried using the OEM endlinks which are longer than the ones from WRD to increase the space between the axle and the sway bar, possibly thinking it was hitting and causing the noise. No luck, still there. The only thing I noticed is that with the car on jack stands the strut mount is tight to the body but I still have slight play in the spring and it's perch. Is that normal? I'm assuming under load it's tight again. So the only variable in my situation is the new Density Mounts and bearing, can these cause heightened noises due to the increased heardness of the mounts?
View 20 Replies
We have a 1999 Passat GLX 2.8 auto. I recently put on a new inner and outer tie rod as well as a lower forward control arm. The issue that we are experiencing is that when accelerating or braking hard there is a popping/clunking noise coming from the driver front area. When accelerating or braking normally/ smoothly it is fine. But, as I said accelerate or brake hard it will make a single pop or clunk and that is it, just once when braking hard or accelerating quickly.
View 2 Replies
What hardware I need to install the passenger side motor mount spacer from Euro Image Tuning. Been sitting on it for a while and cant find the hardware that it came with. Would like to install it, but dont remember what it came with..
View 2 Replies
Our 2002 Mountaineer with AWD started to have a clunk noise in the front driver side wheel area. It happens only when you take you foot off the gas between 30 and 65 MPH. If you slowly ease up off the gas no noise you have to totally remove your foot from the gas. It sounds like something needs grease or like a gear is a little loose. I have seen some post about noise but have not found one that happens in this situation.
View 3 Replies
I recently developed a tapping/popping noise come from the passenger's side of my GLI. The noise is kind of hard to explain, it's similar to the popping sound the seats make every once in awhile when you move around in them, if that makes any sense. I can't really get a video of the sound because I don't think it's quite loud enough. It's starting to get worse, and getting aggravating. It's not coming from the seat, it's more up near the front of the car, maybe where the door hinges are? I can't really pinpoint it.
View 5 Replies
Ok this is for a buddy. He has been getting a weird noise from his drivers side wheel the last two days. The noise does not happen all the time. It usually happens when he goes over bumps. We went ahead and took the wheel off tonight (it was super dark and we couldn't really see) and the clunking is not the strut or sway. With the wheel off we would grab the rotor and move it forward and back (like the wheel is turning) and we get a clunking noise up the axle. Almost like it was loose at the tranny but we could not see. Wouldn't move/clunk much but you could hear it. What this could be?
View 8 Replies
Instead a set of VWR springs yesterday on my GTI. Initially driving it, everything seemed fine. After about 20 miles and taking an off ramp aggressively, I noticed a squeaking noise from my drivers side when I go over bumps. I cannot pin point what may be causing it.
View 11 Replies
My wife has a 2012 Accent with 23k miles. Within the last few weeks she started having a clunking noise coming from the rear passenger side when going over bumps. I had some time to check the basics (loose lugs, broken exhaust bracket, spare tire, trunk lid, etc..) and have come up with nothing. I'm not very familiar with Hyundai's, but I wouldn't think there are very many components to the rear suspension other than struts that could be making a clunk like that. But with 23k miles, the struts shouldn't be bad.
View 6 Replies
Son's 2000 GMC Sierra, 200000 miles, 4.8L engine, automatic transmission and 4WD. Was driving home from a trip to the store - heard a "violent popping noise" on the passenger side and the truck simply slowed to a stop. Engine running fine, all sounds fine while idling. When we put it into any gear, I can "feel" it go into gear but the truck doesn't move forward or back. Just changed differential, transfer case, and transmission fluids about two months ago.
View 14 Replies
I have the most terrible clunking/rubbing sound on my right passenger side, especially when I'm turning left. When I drive straight it sounds like the wheel is hopping even when going over minuscule imperfections in the road. I also get a terrible rub when going over speed bumps or into grooves and dips in the road.
I've searched and searched but cannot come up with a answer towards rectifying the issue. My car hasn't been lowered; I'm running the stop 337 suspension. I've replaced the following within the past two years:
-control arm bushings
-ball joints
-tie rod ends
-upper strut bushings and bearings
-passenger side axle
-dog bone mount
-engine mount
-tranny mount
Most recently:
-front struts
-sway bar end-links
-driver's side axle
It seems to like everything should be solid considering I've done all of this crap. I don't understand why I'm having this issue and why it sounds like it is getting worse and worse.
View 18 Replies
My 2015 is making a strange noise most noticeable when making a slight right turn up a driveway. It sounds like a spring popping.
View 3 Replies
Replaced front leaf springs to procomp, now i got a clunking noise from right leaf spring rear eye(and a little bit from the left).
Can it be that:
I've tighten them to much? Wrong way (big eye is in front)? Got about 4" lift in front and haven't received rear leveling kit yet so the angel is wrong?
View 10 Replies
I installed H&R lowering springs this weekend and now the suspension is making quite a bit of noise. I've double and triple checked the installation, and this isn't my first rodeo, so I don't think anything is improperly installed.
I'm hearing popping/banging over large bumps. I do believe that the noise is most noticeable when my tires drop off into a pothole and the suspension is unloaded. I think the noise is caused by the suspension being uncompressed and then the coils of the springs either hitting themselves or hitting the top hat.
Experienced excessive noise with the H&R springs? I think my next course of action is to get some spring isolators and see if that stops the noise.
View 15 Replies
For a while now my wife has been getting a weird noise from the passenger side rear, it sounds like its right around the passenger side rear speaker area. It only happens on a hard bump or a pothole and it's kinda like a boing sound. Originally I thought that it was the trunk lid spring but I'm unable to narrow it down. I'm also aware that this is close to the rear strut.
View 4 Replies