Golf IV R32 :: When Driving Hard And Speed Shift From 2nd To 3rd Transmission Grind
Aug 1, 2007
I have an 04' R32 with about 56k on it. Here's the problem; when I drive it hard and speed shift from 2nd to 3rd it grinds just a little. It doesn't do it when I'm just cruisen grany shifting. For awhile now I've been thinking that the synchronous from 2nd to 3rd gear was going bad, till I talked to a friend with a 20th GTI who said that the 6 speed trannies will start to do that, and there's really nothing you can do about it. Is this true that I just have to deal with it or can it be fixed?
View 12 Replies
Advertisement
It's happened to me the last 3 times I've taken my truck out and drove through some deep snow. I have a hard time shifting the transmission from drive to park. The snow must get packed up under the truck near the shift linkages.
View 14 Replies
I just bought a 2012 R last friday. 14k on the odometer.
Car is perfect, cept when i shift into 6th its really grabby with a grind. does it every time.
should I take the car in to have it checked out, is this normal?
View 13 Replies
So I changed transmission fluid on my 1.8t GLS because I was having difficulty shifting out of gears on cold starts. It seemed to work fine for a few days and now I'm back to square one, it still doesn't want to shift correctly!
View 14 Replies
This is on my 7.3PSD. I've observed that the 1-2 gear shift drops about 1,000 RPMs and takes a good half second or longer to do so when given a lot of accelerator pedal input. And then the 2-3 shift is a very quick and harsh shift.
If I am accelerating gently the 2-3 shift is as unnoticeable as the 1-2 shift is quick. Is the slow 1-2 shift causing the trans to protect itself and affecting the 2-3 shift? And if so, what do I do to resolve all of this? I changed the trans fluid a week ago and there is no change.
View 2 Replies
Could my brake issue be related to my transmission problem? Neither are constant. Brake problem= sometimes the brake pedal feels hard, like there's no power brakes (I drove a car once. ..looong time ago. .. that had no power brakes or steering) but it will kick in after a short distance. Transmission prob= seemingly unrelated, is a problem shifting from 1st to 2nd gear. This has happened maybe a 1/2 dozen times, the first time and mostly when in heavy commute traffic and when going between 1st and 2nd gear because of the slow commute speed, but also at other times when not in lengthy slow commutes. When it doesn't shift, the odometer doesn't work (shows only dashes) and an engine light comes on (the sprocket/gear looking one). Usually the transmission will eventually shift and the light goes off.
I read that the brake problem might be a vacuum hose problem? Something about a booster? Is this dangerous? or is it like having a car w/ no power brakes? Going to have my transmission looked at this week. Read on another site about dropping valve seats on this year car. If there's a major transmission problem, I'm wondering if it's worth fixing? I changed, timing belt, water pump, front and rears brakes, tires. 143,000 miles.
View 1 Replies
I noticed through careful investigation that my 03 GTI 1.8T (180,000 KM's or 111,850 miles) will grind 3rd when in these conditions:
1. When the car has been driving for more then half an hour and everything is hot
2. When the car is over 2800 RPM's while hot (ie. getting on a highway)
Now I know lot's of people blame syncro's and yes I could see that my car has had 8 previous owners so I can't say they all shifted perfect. But what I do know is that when I downshift from either 4th or Neutral it will never grind even when I don't Rev Match or "Blip" the throttle. So it can't be syncro's in my opinion.
So what I've done to the car to rule out some problems were:
- Change the gear oil from what ever it was before to Royal Purple 75W-90 (NO luck.)
- Then I added a short shifter and adjusted my cables properly (still No luck)
- Finally I noticed my shifter was sloppy and one of my bushings were torn so I bought 42 DD's metal bushings and the shifter did stiffen up a lot, however!!! (No luck)
I know it's not my driving technique because I watch my foot depress the clutch fully and then I gently push it into third. I also know I'm shifting correctly because I can double clutch and normally shift through every other gear properly without any grinds or clunks. Just the devilish 3rd gear.
I would like to hear the solution. I'm going to change the oil one more time to Redline MT-90 and see how that goes, but if that doesn't work I might just tear apart or get a new tranny.
View 3 Replies
My 2008 seems to be having some intermittent trouble shifting into the proper gear at a couple of speed ranges.
Occasionally I'll start it up and pull out of a parking space (or leave a stoplight) and it feels like it's stuck in 1st well after it should have switched to a higher gear (I sometimes feel the upshift at about 10* mph). If I continue accelerating and hit about 40-50 mph, once again it appears to stay in the current gear instead of shifting.
When this issue is happening, the car feels even more underpowered than usual and takes way more throttle than it should to accelerate. This results in a cruising RPM of 3.3-3.5k at 60 mph. At that speed the engine would normally be doing about 2.2k RPM. Similar power and RPM conditions exist in the lower-speed range, too.
This whole thing is usually preceded by a rough shift into gear (D or R) when I first start the car. It's always had a slight lurch in the appropriate direction as I take it out of park, but this is really noticeable.
If I stop the car and come back in an hour, it (usually) appears to have reset itself. I can drive around and the transmission control is as good as always.
This has been going on for about a month, with an episode maybe every week or two. I took it to a shop and they didn't find any problems (I told them about the weird shifting and lack of power).
Does it sound like this is what's happening (it's not getting into the right gear)? Thoughts on what I should do? I can't really remember the speeds.
View 11 Replies
I have a 2011 Super Crew, 5.0, 4x2. I've been told this hard shift at low RPM and speed like idling through a parking lot is normal? We bought the truck used a few months ago and I've been told this is normal.
View 4 Replies
I get a hard shift into second gear, it jerks into 2nd but not all the time. I only notice it after driving on the freeway for several miles. It has 60,000 original miles. Service Engine Soon light come on after the hard shifts with a transmission fault code. I reset the Engine light and let it set 20 or so minutes and it shifts like new.
1997 CHEVROLET TRUCK S10 2WD
6 Cylinders 262 X 4.3L SFI
Automatic
View 13 Replies
2006 GX470 57000 miles loaded. I purchased this new and I was wondering if anyone on here can give me a bit of input on what you may think is going on.
My truck when merging onto a high speed roadway my truck doesn't seem to want to shift into the next gear. Almost like if it was a manual I would have to shift it. It really whines out before it shifts.
Also My husband is hearing a humming/vibration from the rear when we are doing about 65 steady I've already had my tires removed and checked to see if I may have thrown a weight or a broken belt but everything is good. I have Michelins on the truck and they are about 2 yrs old. No damage on the tires I have them rotated every 5000 miles.
I had the truck in for service and told them about this. The Lexus service rep told me his mechanic told him he found nothing. I asked them to check again and he said the mechanic would take it home to drive it at a speed that was needed. Again I was told nothing was found. Got the truck back from the seat repair don't even think the truck was taken home.
View 7 Replies
,My wife drives a 96 Civic DX Hatchback, 5 Speed. It has about 160,000 miles on it, and she only drives it to work and back (a 15 minute drive via the interstate).
Just yesterday, she told me that the clutch feels 'looser' than normal, for lack of a better term. When it's first started, it's hard for her to get it into first and/or reverse, but once driving, she says the shifting is fine. When she's driving at highway speeds in 5th for a while, then has to get off at her exit, she said it's hard for her to get it back into 1st gear. She says she feels like she has to push the clutch harder than normal to get it back into 1st gear.
I don't know much about manual transmissions, and am hoping for some insight into what the problem(s) may be?
View 11 Replies
My 1997 Saturn SL2 with 5 speed manual transmission won't shift into first or second gear. When I shift into the location where first would be the car is in third gear. It shifts into 4th, 5th and reverse just fine, though the shifter is in the wrong position for those gears. I can wiggle the shifter in neutral and get it to move into the position where 5th and reverse are normally found, but it is stiff and makes a clunking noise when I move the shifter over to the far right side.
I have removed the center console and the bushing appears to be intact. Both cables are in their proper positions inside the vehicle and at the engine. One of the cables (the top one in the engine) has some wear and tear on the boot, but does not appear to be binding. Other than the stiffness and the clunking noise, the shifter seems to be working fine too.
View 8 Replies
I own two of the most hated cars on this show, a Renault Alliance and a Peugeot 505 V6. On the 505, the transmission was shifting pretty roughly, it was knocking hard. I bought another 505 for spares that was shifting smoothly. So this summer, I decided to spend 4 weekends on hard labor and I swapped the ZF automatic transmission from the rough car to the good one. After all that job, I didn't notice any real difference. So I guess it was the torque converter that I left on the engine?
Anyway, I decided that it will stay like that because I will rather take a bullet than drop this tranny again. Now yesterday, it was -30?C outside, after 3 months of storage outside, just for fun, I tried to start it. It started right on! So I let it warm up for few minutes then went for a little ride. Big surprise, it shifts very smoothly now in cold weather... So what's wrong? Wrong type of oil? I filled up with the one suggested in the owners manual!
'87 Peugeot 505 STX V6
'87 Renault Alliance DL
'70 Renault 16
'97 Volks Transporter T4 (Eurovan diesel).
View 3 Replies
2009 Kia Sorento. The Transmission was replaced twice last week and the week before. For the same problem. 50K miles. Auto Transmission...
I have a hard shift between 3rd & 4th gears, I have had the transmission replaced twice. Could it be something else?
View 5 Replies
When I had other repairs done they told me that problem was in the number 2 cylinder and it was an internal problem. It was out of their league. I called Honda dealership, they had a girl on the phone and she said she couldn't give me a quote I would have to pay 85. to find out what it was. I don't think she knew what she was talking about. i need a quote how much this should be to fix it before I pay 85. for something that maybe thousands of dollars to fix. The car jerks when it is going into another gear especially in the 1st and 2nd gear. It like shoots off. Jerks and then kicks. If ya know what I mean. Like a transmission slip but I had that checked, that wasn't it. confirmed 2 places that is not the issue.
View 4 Replies
I asked a question about the E40D a while back about a hard 1-2 shift. However, I needed to replace the shift lever to get my OD light operational again. I fixed it and the issue seemed to stop for a while, so I just forgot about it. It's back again, last time it did it, it was hard enough to make the whole truck almost buck. It was a real good bang. So, could this be the 1-2 accumulator piston or the bore it resides in?
The next question I had is how long should an E40D take to shift from second to third? I've noticed on a steep onramp with some throttle, mine can have around 2.5-3 seconds of rev before it finally shifts (unloaded). I could of sworn I watched the tach climb a hundred revs or so during this once (real steep onramp), however maybe I was just dreaming, as I've never replicated it. Just wanted some opinion on this, wondering if I need to start putting some funds aside.
The truck has about 139K and the transmission looks to be original. It was used to haul a camper and a boat most of it's life, or at least that's what I was told.
View 3 Replies
Another problem with Bonne. My transmission has a very hard shift intermittently. The car has approximately 102,000 miles. The shop says it needs 2 new solenoids(1-2 & 3-4). The cost is going to be about $1050. I've read of a pressure control valve causing similar problems but not 2 solenoids. When the problem occurs all the shifting is hard in all gears.
View 5 Replies
At 37 mph and transmission shifts to 5th gear a violent shift occurs. The fist time I thought that I had hit a cement block! It only happens in triptonic or if I leave the shift lever in 4th gear and exceed 55Mph. My local VW dealer said a new Transmission would cure it.
View 8 Replies
2011 F-150 Scab 5.0L 25k miles. Why my transmission is waiting several seconds after being placed into drive or reverse before it actually slips into gear when first started in the morning and why it has a hard shift between 1st and 2nd than again between 2nd and 3rd and maybe why when it shifts into 2nd and 3rd gear it slips back out than back in?
View 7 Replies
I have a e99 7.3. had the transmission rebuilt a couple weeks ago by a local shop. have been getting some hard shifts between 2nd/3rd when lightly accelerating. Took it back already but they couldn't find anything. I am planning on taking it back again but what it is so it gets fixed right. What is causing this or what it might be? Should I be worried about having this shop try and fix this?
View 1 Replies
