Golf IV R32 :: Water Dripped In Sparkplug Holes
May 27, 2012
Coil packs 1-6
Cyl 1
Cyl 4
Cyl 6
Yes that's water down there. Cyl 6 coil pack, water was dripping out when I pulled it
Engine running fine, very occasionally it logs a misfire.
No signs of water splashes on engine cover, manifold or sound absorber. When cleaning I only ever wipe the engine cover with a damp cloth NO hosepipe. As far as I can tell there is no coolant loss, however when serviced back in April the coolant needed topping up.
View 8 Replies
Advertisement
Is this much water supposed to drip from the undercarriage if you've left the car running for maybe 10 minutes without moving it, while the AC is on?
View 5 Replies
Got my car over the weekend and didn't drive until today as I was waiting for the insurance paperwork to clear. Opened my door this morning to find a nice stream of water coming out of a hole (drainage?) at the bottom of the door. It was a good amount of water that came out, and I could hear water in the door when I closed the door.
Opened all the other 3 doors and had a nice puddles of water next to each door. It was raining here Monday and Tuesday. Is there supposed to be that much water just sitting in the car after a rain? I feel like I've never seen that much water come out of a car's cervices a day after rain.
VIDEO : [URL] .....
View 24 Replies
After rain I frequently see a small amount of water- 2-4 oz.- drip out of the trim as soon as I open the hatch. Which side seems to depend on the tilt of the car. The only upstream point of entry appears to be the rear glass. Leaning toward a bead of silicone caulk, tastefully applied, to see it this stops it.
View 18 Replies
I am finding that after a heavy rain that water is running out of the bottom of all four door drain holes when I open them.I have not noticed this on any other of my previous vehicles.Is it "a" good that they are draining well, or "b" bad that water is getting in in the first place?
View 11 Replies
What I should use to fill the holes on my front bumper? I know how to get paint to make it blend in but what should I use as a filler?
View 1 Replies
So i just had installed a brand new set of bilsetin pss9. Going over bumps or pot holes at a slow speed, i get loud clunking out the back. Did not have this prior to the coilovers. Its dropped almost 3/4 of the thread. What this is? Also the shop that installed them, had put them in with out the rear upper spring plate, is that a standard install on these?
View 1 Replies
I just bought a 2011 GTI in Steel Gray Metallic. The first thing I did was remove the front license plate holder.
Doing that revealed 3 large holes (about 8mm), and 2 small screw holes. I'd like to repair this myself or have a shop do it.
Is there a relatively easy way to fix this myself (other than putting the holder back on)?
View 8 Replies
My 2001 PT Cruiser began to over heat today. By the time I immediately pulled off the road and smoke began to come out from under the hood. Once I stopped I heard a bubbling noise and watched as all my coolant steadily dripped onto the ground (almost a pour). What does this mean?
View 19 Replies
The problem started when his heater core was leaking coolant and it dripped all the way down to his original ECU. Car stopped working. Then he went to a Hyundai dealer to fix the problem but they said he had to buy a brand new one. First ECU didn't work. Returned it and bought one more expensive. Dad told me it worked but he didn't by pass the heater core so coolant dripped again. So now I'm on my third ECU but it doesn't work. I've read online that some older cars have plug-and-play type of ECUs that aren't restricted to the VINs. His car is a 2004 Hyundai Santa Fe GLS FWD 4dr 3.5L.
View 5 Replies
I know the front and rear emblems have holes behind them. Looking for pictures of the holes in the body of the car?
View 10 Replies
I need to put a front license plate on my Prius. I notice there are a couple little indents on my front bumper but no holes . Do I need to drill holes or something else here to mount a plate ?
View 13 Replies
My girlfriend has a Tiguan, and I noticed there are no key holes anywhere in the car. I noticed this after leaving the lights on in my GTI and having to manually key in to gain access to the car.
What happens if she were to leave her lights on? Is there a separate battery source for the keyless entry? I have to think there's something smarter (than me) to keep you from getting totally locked out of your car if your battery should die...
View 6 Replies
I bought the car from dealer, there are now FOUR! holes on the front bumper. I don't understand why they couldn't just use the existing holes to put the license plate holder. Now I'm stuck with these holes and I'm looking for a cheap alternative to fill them. I like the clean look of the front end without the plates and don't want to spend a fortune at a body shop, but I also don't want 4 dots either. What I can do/use?
View 3 Replies
After reading about water in body panels in another post I looked on my rear door and saw what looks like drain holes, one on each side of the inside lip, but they are covered by a sticker and have been painted over. Was this something that was just never removed or are they supposed to be covered.
View 3 Replies
I bought the car a month ago and went to pick it up today and there was 3 inches of water in the left front and rear footwells. I drained the water from there but can still hear it sloshing around in the quarters. Probably the drain holes are clogged. Where are they and how do I get to them? Do the rocker moldings have to be removed?
View 2 Replies
I recently got my windshield glass scratched by my windshield wipers so I cleaned the window and did an inspection. It turns out I got about 7 glass chipped holes. There is 1 right in front of the driver seat so I knew about that but I didn't know about the rest.
I also checked the whole front and it's the same issue. Chipped paint everywhere.
I know it's from highway tiny rocks but still, is the Toyota paint and glass so weak or is it just my car?
View 6 Replies
How to remove a crankshaft pulley like this one? It doesn't have any holes for bolts, to hold some soft of breaker bar in place.
Pulley.JPG ....
View 4 Replies
I plan to remove the front license holder from my car, fill the holes, and paint/clear coat/sand them. Any recommendation as to what to fill the holes with (I'm not going to use a plug.) Exactly what the bumper cover is made of, I can find the right material to bond to it.
View 2 Replies
How do I get rid of license plate holes on my front bumper? I took my front plate off and now I am stuck with annoying holes drilled into my front bumper. Its not noticeable but i know its there so it irritates me.
View 4 Replies
I need to mount a plate on front bumper and there are dimples for 2 holes. Do I just use self tapping screws here as I've read you don't need a mounting frame?
View 3 Replies
