Golf IV R32 :: Steering Wheel Shakes Lightly Left And Right When Brake Hardly
Dec 29, 2010
So about a day ago I finished installing my new rotors and pads.. I thought my vibrations are gone.. But I took it for a ride today.. When i brake really hard my steering wheel shakes lightly left and right.. Also when turning right there is a sound coming from the drivers side like the rotor is scraping against something or the rotor shield..? I installed the retainer spring and the first night when i took it for a ride everything was perfect.. Today its making that noise and the steering wheel as well as the vibration..
View 24 Replies
Advertisement
When I have to push on the brakes for a hard stop, I can feel the brake pedal and the steering wheel shake a whole lot. Also, he ABS light is on. Correlation between the 2 obviously?
View 10 Replies
I have a issue with my golf 1.9tdi when i start the engine it shakes really bad and feels very rough when sitting in the cab steering wheel vibrates really Bad and engine looks like its going to fly out of the car but when i apply throttle the vibrations go only happens when idling.
What it could be i have done a Diesel Purge, changed the fuel filter, cleaner the EGR Valve, changed the coolant temp sensor, checked the injector loom for continuity and resistance everything was fine, checked resistance on injectors readings was all the same, flywheel seems fine when running (no movement) and no change when i dip the clutch, engine mounts i changed the right hand side one all the rest are fine and not penetrated.
View 7 Replies
I have a 2012 Rav4 and I have been hearing a creaking/groaning sound coming from the front left brake when I apply it lightly. It gets worse as it heats up. It sounds exactly like the brake in this youtube video.
View 2 Replies
Car: 2003 Jetta GLS 1.8T
The car is starting to produce a heavy shake in the steering wheel when above 45mph up through highway speeds. The kicker is that the shake only occurs on-center, because turning the wheel just a few degrees off creates a relatively smooth result.
Checked the wheels for balance, tire wear [which is good, no cupping], lower control arm (LCA) bushings, and complete a lock-to-lock steering test on the ground to confirm steering rack mounting bolts are tight. What's the next pieces of hardware I'm needing to verify?
View 2 Replies
Just got my golf R 4 door/Nav. When driving straight on the highway (regardless of road crown)... my wheel was about 4 degrees off to the left. No problem alignment wise, but the nice flat bottom wheel is cockeyed.
Car has only 330 miles on it. Took it back to the dealership, they put it on the alignment rack - actually had me sit in the car ensuring the wheel was straight as the tech adjusted the Tie Rods below.
This made it better - I instantly noticed it was better when I took a short test ride with the tech, just as they were closing. However, on the highway home I noticed its still about 2 degrees to the left. Really frustrating as now I have to take it back to the dealer a second time.
The tech actually showed me the alignment printout which was close to-but not totally perfect. Said the only way to make it perfect is to adjust the sub-frame? Really? on a new vehicle.
I do have plans to mod the car's suspension with H&R Coilovers - but will not touch anything until I get this wheel thing square and I am 100% satisfied.
View 13 Replies
Took delivery of car and alignment is way off. Steering wheel is turned left when car is straight. The dealership is trying to charger me for a alignment. Car has 2500 miles on it and came from factory this way.
View 8 Replies
I've ignored it long enough and dont remember if it was like this when I bought it from the second owner...guess I had too much fun during the test drive. Any ways would it be an alignment issue up front or what?
View 8 Replies
I'm getting this weird sound when i turn on my car and turn the steering wheel left and right not even a full lock just left and right really quickly or slow there is this annoying clunking coming form both of the front wheels atleast thats what i think it is and it feels as something is loose but i checked most of the bolts.. Recently i changed my front wheel bearings inner cv and outer cv joints on both front wheels.. i changed my ball joints and tie rods everything was change within a 4-5months..
Also the other day as i was driving and i could only hear this 20mph and up this weird clunking and vibration in the floor.. no vibration in the steering wheel just the floor and clunking sound.. i know for a fact i need an alignment and possibly new tires.. but what would the clunking be coming form when driving or just parked in place while moving the steering wheel...
View 7 Replies
This is for a mk6 GTI w/ ~3500 miles ... Having problem where the front end of the car is making a clicking/clacking noise with the steering wheel cranked full left or right? The noise isn't there (i think) when making a normal turn. No noise either when car is stationary when I crank full left/right. Are the CV joints dying? I find it hard to believe that both sides are dying and with such low mileage...
View 8 Replies
when Im going down a hill or when I hit a certain speed my steering wheel shakes and I don't mean a small shake I mean my arms are grabbing the steering wheel to keep control and they are violently shaking with the wheel. Now in the begining I heard that if alot of snow got packed into your tires the wheels would shake but theres no snow I check everyday before I leave and if there is I get it out. So then I think maybe it could be my tires aren't balance right but no less then 2 and 1/2 months I got new snow tires put on in a shop so they SHOULD'VE balanced them right? so that can't be the problem so then I thought alingnment! but the thing with that is if I let go of the wheel when I'm going under 50-60 miles an hour and it stays pretty damn straight then it can't be that either..
View 14 Replies
I have 2009 Honda Accord with approximately 66,000 miles (I drive 70 miles r/t to work every day). I had service done on my car the other day to get the front brake rotors replaced and four new tires. Upon receiving my car and driving to Boston the car began to shake at highway speeds (50+). I took it back to the mechanic and they re-balanced the tires. I drove to work the next day and the car still shakes (albeit now at 60+). Today the mechanic rotated the tires in case there was a bent rim in the front causing this. However, on my drive today the car still shakes (though it's not as violent or noticeable as the trip to Boston).
View 10 Replies
My steering wheel vibrates when I stop or when i turn on the AC...
View 8 Replies
My 2010 Tiguan R-Line only experiences vibration in the steering wheel noticeably at 70mph plus. The tyres were brand new when i collected the car in July this year and the alloys have been balanced since having the existing alloy weights replaced with new ones in August. What the problem could be and how best to resolve this nagging issue.
View 6 Replies
1981 Corvette rebuilt/restored. 35+ mph. steering wheel shakes/vibrates. Higher speed, depress clutch, smooth ride. Taken to mechanic recently, test driven to acknowledge, lift done twice, no clue.
View 5 Replies
When i put on the brakes the steering wheel shakes and pulsates. Iam getting mixed info. One person I know said it is the brakes (front), another person said i need the alignment checked. yet another said Rotors, and still another said back brakes.... When i touch the brakes the whole van pulsates and the steering wheel shakes.
View 3 Replies
'02 SE!!! It came with issues needing to be fixed and I'm more than happy to do it... but 2 current issues: Front brakes and O2 sensor/check engine...
BRAKES: When slowing down from highway speed, the front end shakes and the steering wheel moves. I'm guessing bad rotors, as I've had the issue before and that was it. I want to do the pads and rotors and call it a day...
But I don't want to buy crap and I know that's mainly what I tend to find at the drop of a hat, so I have to order something anyway.
O2 SENSOR/CHECK ENGINE: The code which is coming up is "P0420" and when I researched that, it came up as being either the O2 sensors or the cat. I'd like to know which O2 sensor is the UPSTREAM, which is the DOWNSTREAM, and if there's a way to test the sensors on the car currently to find out if they are in fact bad.
I've also heard a bit more exhaust noise than I'd like to hear out of the car (like a leak), but it isn't howling yet. Is there a chance that a leak in the flexpipe/downpipe/etc could lead to throwing this code?
View 7 Replies
1,200 miles on my gx 460. dealer states, he has balanced all tires, and checked for radial run, at 60-65 miles, my steering wheel shakes.
View 14 Replies
I have an 05 Camry LE & when ever I'm on the highway going around 50-80mph & need to break my steering wheel starts to shake until I either stop or put my foot back on the gas. Last year my power steering rack & one of my motor mounts got replaced, & for awhile it stopped & figured because that was going out that's what was causing it.
Well about a month later it started back up & still does it, I've taken it to the dealership & have told them & they test drove it, felt the same thing I felt but didn't find anything. Is there anything else that could be causing it ? Earlier last year my bearings were lose in the front, and I managed to get my brakes stuck & had that all fixed & since then that's when it started shaking . I took it back to that shop & mention every time I go in for oil changes at my dealership, is there something else I'm not aware about that I should ask them to look at ?
View 6 Replies
My accent just crossed 180K mark. From last year the steering wheel shakes quite a bit at highway speeds ,say 70MPH. It's especially bad when I accelerates . Took the car to a shop, they told me two things, the CV axle of passenger side needs replacement, and the wheel hub bearings are bad(both front wheels). They quoted me $200 for replacing the cv axle, and $400 for replacing both front wheel bearings. Since I don't even think the car worth $600 right now(given high mileage), I told them I'll just do the axle(I know how to do it myself but don't have the time, plus it won't be that much cheaper DIY anyway). They said fine, but if you don't replace the bearings you may have the wheel fly off one day and that's dangerous.
They replaced the axle, and the car drives a lot better now. There's still a little bit of shaking at high speed but 75% of that shake has gone away. My question is, does the worn out bearing causes car to tremble at high speed? I heard other people told me there should be a grinding or loud hawling sound if the bearings are bad, but I don't hear that. I searched the internet and some people say, to determine if the hub bearings are bad, just drive it for 10 minutes then feel the hub. If it's barely warm, the bearings are good. If it's warm to hot, then the bearings are bad. I felt it and it's warm, but not too hot to touch. I tried the rear wheels and those are barely warm indeed.
So from this method it seems the front wheel hub bearings are indeed bad. I wonder how long I can keep driving this without endanger myself. $400 is not cheap for this car and I don't have a machine to press in the bearings myself. I can disassemble the rotor and hub that's not a big deal, but I don't know how to get the old bearing out and the new bearing in. Is there a machine shop that just do the pressing? Or, is there any shop selling the hub assembly with bearing already in place? this way I just remove the old hub assembly and replace it with the new assembly, a lot easier. I searched the internet but can only find pre-assembled hub w/ bearing for the rear wheel of this car. I need the front ones.
View 4 Replies
My old car has this problem when it's on highway the steering wheel shakes quite a bit. Is it a wheel alignment problem or wheel balancing problem? Since I've just fixed the transmission I am driving this car more often(to save gas) and this problem is really annoying.
View 4 Replies
