Golf IV R32 :: Rear Suspension Bolt Part Number And Dimensions
Apr 5, 2013
I need the part number for the lower shock bolt that holds the shock, swaybar link, and trailing arm together. It came loose and stripped the threads out of the trailing arm. I think if I can find a nut the right size I can tighten that against the outside of spindle for a temporary fix. I can't seem to find one, or a part number.
View 2 Replies
Advertisement
According to the repair manual, you need to replace item 3, a Torque to Yield bolt, when removing the caliper. What is the part VW part number?
View 18 Replies
As the title implies I need the part # for the OEM VW Stretch bolt that holds the Torque Arm insert in place. I've had the mount on my car for a few months now and I've grown tired of it.
I re-used the OEM bolt the first time and I think I'm better off replacing it as it may not be wise to unbolt it and re-torque it for a third time. Looking for the part # for the stretch bolt? I believe it's 21mm.
View 2 Replies
I've looked through ekta about three times already and I can't find the parts numbers for the rear bumper reflectors...
1K6945105A - REFELCTOR rear left
1K6945106A - REFELCTOR rear right
View 5 Replies
2012 Golf TDI. I'm trying to find the actual part number for the rear, driver's side door panel (door card). I've found some listings for the actual panel but none that provide the part number. It's the one that has the aluminum insert w/o premium audio.
#1 in this diagram.
View 4 Replies
What are the part numbers for the REAR Sway Bar Bushing Clamp to fit a 2004 F350 Dually w/ the dana 80 axle? This is the part that surrounds holds the bushing that encompasses the sway bar holding it to the axle itself.
Found out couple weeks ago that the front and rear bushings were different heights. Meaning the ones for the front sway bar bushings were taller and the ones in the back were shorter. I can find the part numbers for the front ones pretty easily but the rear ones is like searching for the holy grail. And yes I need the shorter rear ones.
View 1 Replies
I am installing VWR Springs to replace worn stock components on my mk6 R. It appears that the previous owner slammed the car, and removed the "nipple" that holds the rear spring in place from the top. Both upper and lower spring isolators were present.
I am trying to find a name or part number for this unknown "nipple". I tried some combinations, such as "rear spring cap" and "rear spring centering guide". It looks like it would screw into the body, right above the springs themselves.
View 1 Replies
What is the part number for the rear hatch strut for the new passat wagons? i need the part # for the ones that has the remote hatch closing. I want to put those struts on my mk5....
View 7 Replies
When I bought my truck one side of my truck had plastic between the outer sheet metal and inner sheet metal and the other side was missing. It looks like the purpose is to keep mud and road gunk from shooting up into the rear area. Where I can order replacements and what they are called? I need both sides, since the one I did have was cracked and barely hanging on.
View 8 Replies
What the exact part number is for the seal for the rear axle in a 2003 F150 4x4 ?? Mine decided to leak yesterday and so I looked up Ford for the part but there's two .. one is thick and one is not. I don't want to take the seal out first to look because I got no other vehicle to get it and putting it back in and out would be silly.
View 4 Replies
My driver's seat is broken. Specifically the part in the middle that lets one adjust the front to back position and it's connection to the front bottom of the seat. I'm hoping this isn't all one unit as I'd rather not buy a new seat.
I can edit the pictures to point out what's wrong if it's not obvious.
View 2 Replies
The MDI cable that came with my car is way too short.. What is the part number or where I can get a longer version of this cable?
View 4 Replies
What is he abs unit bottom bracket part number...
View 3 Replies
Replacing the backing plates on my rear end, figure get new inner bearings and seals in there. Bearings seem fine but cheap insurance, dont wanna pull it all off again.
When i pulled my hub off, the hub seal stayed on the housing shaft, this is normal? Just gotta pry it off there somehow?
Then new seal-TIMKEN 370247A just tap it into the back of the hub? Also is this the right inner bearings? TIMKEN NP114036
View 1 Replies
2001 12v vr6 here, found my leak, now I need to know what the heck this is! Is this even removable?! It's basically a plastic elbow that connects to the radiator on the driver side, I have a photo. I tried fixing this crack with some glue and tape (It was late and couldn't get any temperature friendly glue), as you can see in the picture, it's covered in electric tape, and the hot coolant burned right through it all.
Another problem I had is my fuse box, burning through my fan fuse, looks something like this, the fuse was burned, but after placing a new fuse (just for contact), the fan worked, so I'm guessing a new fuse box is where to start ?
View 3 Replies
While changing the oil on my car I noticed that a bolt was missing from the steering or suspension assembly (not really sure what its for. I was wondering what it is for and how important it is. I went to the store to get a replacement and found that the threads in the hole have all rusted out so I can't get a new bolt in. Is this something I should definitely fix before driving again or is it not too serious.
Here is link for the pictures: [URL] ....
View 2 Replies
I'd like to get the VW part number(s) for:
Touareg DVD NAV Unit
Touareg NAV Antenna
DVD Map Disks
View 11 Replies
I need the PASSAT B5 shift knob part number...
View 1 Replies
I have a 2001 passat and I want to get a new remote, where do I locate the part number for my remote?
View 4 Replies
Is the 25th AE part number, 1J1-941-017N, for the passaenger side the same for the 20th AE. My gut tells me yes, but i can't find it on a search.
View 6 Replies
I've started retrofitting foglights into my mother's 2012 Tiguan (S 4motion). All of the parts were dealer ordered, but twice now they've sent me the wrong switch. The mounting/locking mechanism is the wrong size (too large on the new switches). In addition, the second switch had an "auto" selection.
The original part number was 3C8941431F C1F-T shown on the left here:
The two part numbers they have shipped so far are:
3C8-941-431-G-XSH and 3C8-941-431-E-XSH
I need a standard headlight switch, no auto, with fog (front only is fine).
View 5 Replies