Golf IV R32 :: Original Wheel Bolt Length?
Feb 23, 2012
What is the original wheel bolt length? Is it 28mm?
View 7 Replies
Feb 23, 2012
Advertisement
Celica :: Distributor Mounting Bolt Length?
how long should the bolts be that mount the distributor to the (non-california) 5sfe? I'm putting my car back together (finally) and the only bolts from my pile that fit are one that is too long, and two that are only a couple threads longer than the width of the distributor flange. simplest conclusion is that the latter are the bolts that were there, but does that seem right?
View 4 RepliesFord F-150 (2004-2008) :: AC Compressor Bolt - Size And Length?
I went and fired up my ac today for the first time, and guess what no ac. So I crawl under the truck to check the compressor out, and guess what I find? The stupid face of the compressor had came loose and was sitting between my frame and the steering rack. Just glad it didn't fall off the truck, now I need to put it back on, but what size bolt. Looking for a spare compressor or know the size and length of the bolt?
View 7 RepliesFord F-150 - 1997-2003 :: 1999 V6 - Top Starter Bolt Size / Length?
I have a 1999 f150 v6. Top starter bolt fell out while driving it seems. Local parts store had no way to look it up. Need to know the size, length I need? Only car I got so I am stuck walking.
View 1 RepliesGolf/GTI VII :: Removing Wheel Bolt / Missing Piece From Tool Kit?
My 18" Austin alloys come with black Volkswagen-branded bolts with 9-point "starburst" openings in the center. They look pretty common based on photos I'm seeing on the Web.
Thing is, I don't see anything in the tool kit that looks to match up with these bolts should I, or a mechanic or roadside service, need to remove a wheel(s).
I have the standard tool kit and it has all the tools shown in the manual EXCEPT the "Adapter for anti-theft wheel bolt (if equipped)." Should I have one, or am I missing something else obvious here?
Golf IV / Jetta IV :: 2001 - Diameter And Length To Replace All Vac Lines
Basically I want to replace all my boost/vac lines with silicone. I have a 01 jetta 1.8t with aww engine code. I need to know the diameter and length of each.
View 1 RepliesGolf/GTI VI :: Can Use Original TPMS In New Wheels
Can I use my original TPMS in my new wheels? I currently have 17' denvers and will be buying 18' wheels can I transfer my TPMS to my new wheels? Do I need to buy something?
View 8 RepliesGolf IV / Jetta IV :: Way To Replace Original Headlight Bulbs?
Headlight bulbs. So I am looking to replace my bulbs because mine don't seem to have that great of light output. I am not sure if it is the actual headlight or if it is just the bulbs? Is it possible to just replace the bulbs and get better light output? I am not sure of the brand of headlights I have but I am pretty sure they are some cheap aftermarket ebay headlights. I want to replace the headlights in the future but for now I was wondering if I can get away with just replacing the bulbs. When selecting the bulbs, are they all pretty much universal or do I have to buy specifically for the type of headlights I have?
View 10 RepliesGTI 337/20th Anniversary :: Standard OEM Wheel Locking Lug Bolt?
What is the mk4 standard locking lug bolt? IIRC it was like a 16 point.
View 1 RepliesFord - Focus :: Control Arm Bolt Broken During Wheel Alignment?
I've had two control arm bolts broken in the last year (resulting in the arms being replaced) during my '3 year alignment' program.
The bolts have been broken and then I get a call and a bill for the new control arm and labor.
Is it that common to break the control arm bolts when aligning the wheels? I do live in Michigan where salt is used on the roads.
There are some other things that seem have not inspired my trust (billing mistakes and not torquing the rear wheel after replacing the arm and letting me drive home) ...But, I want to be fair and if this/these are regular occurrences I'll go back and work with the shop.
Lexus RX 2004-09 :: Oily Bolt On End Of Transmission Case In Driver Side Wheel Well
Noticed this during an inspection of the wife's '07. Oily bolt on end of transmission case in the driver side wheel well. Definitely a slow seep.... Will have the dealer take a look...
View 1 RepliesGolf V R32 :: Ball Joint Bolt Broke Off
I was putting on the H& R sports springs tonight and was onto the last corner, front passenger when one of the 3 ball joint bolts broke off. It was so rusted that the nut didn't want to come loose. I used too much force and out came the piece. Do I just go buy a new ball joint at the local VW dealer and swap it out. I didn't touch the other two and the car is still driveable. It's the middle one, exactly as shown in this photo from the DIY.
View 6 RepliesGolf V R32 :: Removing Broken Rear Belly Pan Bolt?
just got back into a .:R 6/18/13 and took it to a nearby jiffy lube to get an oil change not 100% sure if they're responsible or not but i noticed the belly pan was hanging rather low and broke not too long after. ordered a replacement from ecs w/ the 3 M6x20 pan->subframe bolts since they were missing. got under the car today to replace/install new pan and noticed that 2 of the missing bolts were broken in the frame. tried searching but found nothing?
View 4 RepliesGolf V R32 :: Rear Caliper Bolt Part Number?
According to the repair manual, you need to replace item 3, a Torque to Yield bolt, when removing the caliper. What is the part VW part number?
View 18 RepliesGolf IV / Jetta IV :: MK4 GTI Exhaust Leak Or Possible Bolt Missing
Brief back story, a year ago my timing belt went and had to replace the cylinder head and all associated parts. No problems since then, until now. Recently the check engine has come on, and got the code for an exhaust leak. Can't remember the exact code number, but the leak wasn't causing a lean condition or causing the engine to act weird so I left it until I had to time to find the leak. On the way home today I noticed an exhaust leak that got increasingly worse to the point where at a stop light I'd go to accelerate and it would pull away very sluggishly. Got home, opened the hood and tracked down the exhaust leak to somewhere around the manifold/downpipe/turbo area. I took off my cover and noticed what could be a bolt missing, and upon further inspection a bolt that may be coming loose.
Here's what I'm referring to:
- Missing bolt?
- Loose bolt missing bolt?
- Loose bolt?
Ford F-150 (2004-2008) :: Bed Length On A Crew Cab?
What is the bed length on a 2004 f-150 crew cab?
View 5 RepliesGolf IV / Jetta IV :: 1.8t - Oil Leak / Drip Coming From Drain Bolt
So i noticed i am leaking oil, not much but enought that i will have to top it up before the next oil change. The drip comes from the drain bolt, and drips off the bottom of the oil pan right under it. I have replaced the bolt and it still continues to leak. What could be the cause of this?
View 1 RepliesGolf IV R32 :: Rear Suspension Bolt Part Number And Dimensions
I need the part number for the lower shock bolt that holds the shock, swaybar link, and trailing arm together. It came loose and stripped the threads out of the trailing arm. I think if I can find a nut the right size I can tighten that against the outside of spindle for a temporary fix. I can't seem to find one, or a part number.
View 2 RepliesGolf IV / Jetta IV :: Coil Pack Sparking When Try And Remove Hex Bolt
I'm in the middle of replacing my VC gasket and while I was removing one of the hex bolts that holds it in it started sparking like crazy and turned the tip of the hex wrench glowing red. It didn't do this for the first bolt I took out. I also forgot to disconnect the battery before I started, could that have had anything to do with it?
View 6 RepliesGolf IV / Jetta IV :: Steering / Suspension Assembly Bolt Missing
While changing the oil on my car I noticed that a bolt was missing from the steering or suspension assembly (not really sure what its for. I was wondering what it is for and how important it is. I went to the store to get a replacement and found that the threads in the hole have all rusted out so I can't get a new bolt in. Is this something I should definitely fix before driving again or is it not too serious.
Here is link for the pictures: [URL] ....
Golf IV / Jetta IV :: Broken Bolt From Motor Mount Bracket
The other day when i wanted to start the car, I found out my battery was death so i decided to ask my buddy to push me and crank it on gear. Car shakes as normal and engine started, but then i heard a weird noise like if something was rubbing. I turned it off and popped the hood. I found my engine leaning forward and toward the passenger side.
So the next morning, I checked the bay again and i found out that it wasn't the motor mount. Motor mount is ok, but then i found a broken bolt that holds the bracket to the block; the one that goes right next to the water pump to be more specific. Also in the back of the block there is a bolt that hold bracket to the block again and the thread whole was enough weak to break when the other bolt failed. So I did some research and i found that there is a solution for the bolt in back of the block.
What I am concerned is for the on the goes right next to the water pump. It seems that it broke the whole thing including the part where the bolt threads go. I just had a shop install I.E connecting rods, new piston rings, and rebuilt the heads. They put a new timing belt kit and all its job required. I think they might have a bit of fault on this since it had to be removed when they did the timing belt kit. Anyways I don't want to think my block will be a junk now because engine is running like a champ, and that would be a bummer.
-Bolt that is broken in two pieces.-
-And where it is attached to the block-
-Part of the engine where this all goes.-