Golf IV R32 :: Light Clunk Every Now And Then Over Small Bumps
Jun 2, 2011
I recently spun my coils all the way down on the front, removed rear supporter springs, and rear perches. Now I have a light clunk every now and then over small bumps. Looked under the car and nothing is obviously loose or missing. But when I grab the rear driver axle I can wiggle it some. Not real loose but enough to hear the clunk. Like a loose tooth. Sounds like its coming from inside the inner cv.
I plan on jacking the car up after work and taking a closer look to see if its something simple. My question is if I don't see anything what's a possible problem? I've heard people having front axle issues when going real low but its only my rear driver side. Could it just be a bad angle? It's weird ONLY being the driver side.
View 14 Replies
Advertisement
Car has 170k kilometers , just over 100k miles on it; GL model so no sport suspension. Noise occurs going over small bumps.
Stabilizer links are the only front ends parts that were changed so far(12 months ago). Can't feel any play in tierods or ball joints, even the struts don't show signs of leakage and bounce test seems to show they are still okay.
Noise appears to come from front of car ; but I hate guessing and throwing money away. Fished a few large chunks of gravel trapped in subframe cross member around steering rack; no change.
View 10 Replies
I have a 2007 Sonata Ltd (63000 miles) and had a clunk in the front suspension. I had the front upper control arms replaced (which were visually badly worn) and that fixed the problem. But now, a several months later another similar clunking noise has developed when I go over those small speed bumps in parking lots.
View 18 Replies
The car has begun making a horrible clanking sound when going over small bumps. It sounds like it did when the control arm bushings were bad on my old mkIV. There are less than 5kmi on the car, so I can't imagine any mounts are worn out. It's still under warranty, so I know that it's just a dealer visit, but I'm wondering anyway. It sounds like crap.
View 8 Replies
I recently lowered my 2012 Beetle with HR super sport springs/stock struts.. So this annoying tin rattling sound has come out. I just replaced the strut mounts thinking they separated like they are known to do. Sound Still there. Now my thinking either it is the sway bar end links being too long or possibly I have aftermarket wheels and aluminum hub rings it could be rattling over small bumps? Could it be the strut bearings? I've been over everything that I can think of and nothing is loose.
View 1 Replies
I have 46k on stock suspension and lately I have been hearing a clunking sound when hitting bumps. It sounds like it is coming from the strut mounts and the ride has been harsh compared to when the car was newer. There isn't any bounciness and I thing the shocks/struts are fine. I push down on the body and no bounciness when I let up. Could my strut mounts be shot already?
View 6 Replies
FYI This is on the passenger side. Should I just replace the whole metal shaft? Can I just replace the rubber thing that is severed? If this is the wheel bearing do i need to get it repacked?
I am replacing the whole suspension because I started hearing a "pfft" sound going over bumps and sometimes a clunk on the passenger side when cornering to the right. is this severed leaking rubber thing the main cause of the clunk perhaps?
View 13 Replies
A clunk sound coming from the front end. Drivers side and Passenger side. Not really a metal on metal sound. The problem started after coilover install. The sound occurs while braking and accelerating over bumps. So what I've replaced:
-Strut Mounts and Bearings
-Lower control arm bushings (R32 bushings)
-Drivers Side CV axle
What I've checked:
-Tie rod ends have no play
-Ball joints have no play.
-I have no sway bar, so not the sway bar bushings.
-Its not the axle hitting the frame.
Could possibly be the dog bone mount but when I installed the 1' motor mounts I saw no issue but could possibly be the bushing. feel the clunk in my foot as well.
MK4 2000 Jetta 2.0 5speed With Raceland Ultimo Coilovers (Junk)
View 13 Replies
I have 1, possible 2 motor mounts in my 2001 Volvo S-60 that kind of crunch/squeak when I go over small bumbs. Actually, the lower passenger side mount does the majority of the crunching noise. The upper mount (visible when you lift the hood) does it more so when its cold and the rubber contracts.
I'm not 100% sure the lower motor mount is what's making that crunching noise - but I'm pretty sure that's what it is as the suspension is in decent shape.
My question is, is it possible to change the lower motor mount myself? I've heard that the engine needs to be supported when doing this, but is that so when you need to only change one? Also, does it actually need to be changed or would any kind of lubricant will work?
View 3 Replies
I have a very strange sound coming from the back of the car. It sounds exactly like you have a 6 pack of mineral water in plastic bottles wrapped in foil in the trunk. It makes this sound when I go over some small bumps and not paved roads. However on bigger bumps it is completely quiet.
My problem is that I do not know where the sound is coming from. I would really like to get rid of the sound myself.
View 2 Replies
So I've got some creaking going on at low speeds only over small bumps. Sounds like it's coming from the passenger rear area. It's an 08 with just under 28k miles. I'm not noticing any issue indicating the strut being blown, it's just an annoying creaking. I didn't realize how noticeable it was outside the car until driving through a parking garage with the windows down on Friday.
View 13 Replies
I have a 2006 Scion tC, 109k miles. I have a rattle coming from the front-right wheel area. It's only over small bumps (I mean SMALL, like little dips), and I can't really re-produce it on a jack. It happens more frequently when I turn to the left. The frequency of the rattle sounds similar to a paint can ball, but if it were a lower pitch. I'm thinking of checking the the strut mount, or maybe the end link?
View 6 Replies
So I was driving home from work today and picked my daughter up from the sitters. When I got back in the car I noticed a "clunking" noise when I would hit small bumps. Trying to figure it out, I also noticed this occur when driving straight and moving the steering wheel back and forth.
The car is a 2012 SE v6 with about 26k on it.
I did install eibach springs about a month ago, but have not had any issues until now. I took both front wheels off and checked anything I would have changed when installing the slings and everything seems okay.
View 5 Replies
I have a 2012 Tig SEL with 18" wheels with factory 235-50-18 tires and stock suspension. The car rides pretty smooth for the most part, but I also find that it's sensitive to lots of small bumps and the suspension is not as smooth as friends other small SUV's. What do you all think about how the Tig rides overall?
View 11 Replies
Its been awhile since I've posted, but this is annoying me! Everytime I drive over a small imperfection on the road, I hear this "rattle" or "small thunk" that sounds like either plastic panels in the rear, or maybe the rear suspension.
I ensured the rear seats were locked in place, I even removed that flimsy rear deck, and even drove with my seats down, and I still hear the sound.
I park on some bumpy terrain at my house, and sometimes I'll go over speed bumps maybe a little too fast, but not really fast.
Its just a sound that's never been there before, and I can't hear it unless I have the music off. Its not overly loud, but that "rattle" or "thunk" just makes me this car feel not so "new and refined" anymore.
View 11 Replies
I recently lowered my 2015 rc350 f sport awd with tanabe springs. I am hearing the "hinge" noise when i go over small bumps, in all modes.
I think i am hearing it from the left front or rear side. Is this from lowering the car or something wrong with it?
View 2 Replies
We took our Ex to a local business and got almost 6k worth of work done prior to our trip. This included specific instructions to inspect the brake systems and replace anything that needed it. The work done included new front calipers, pads, hubs, new xrf ball joints, new shocks all the way around including dual fronts, a 6.0 tranny cooler and all new fluids. I alook tried getting a magtec differential cover installed but was told it didn't fit.
Long story short, while on the road we began to notice a grinding noise occasionally on small bumps. In reding ca our rear drivers side brake pads basically disintegrated and we were stranded while BigO replaced both pads, calipers and one rotor. They also advised that the slide pins were frozen on both calipers. This had no effect on the other noise I described.
Now that we're home we went back to the original shop and explained what happened. The owner agreed to take another look at the truck but basically said he stands behind his employees. He admitted that they chose not to examine the rear brakes to save usome "3 hours" of shop time. He also said that the rear brakes would've cost the same regardless of if they'd replaced them instead of BigO.
When my wife pointed out that our family had been first of all put in danger and secondly stranded by his worker's shoddy examination. He then preceded to ask why I insisted on doing so much work to such an old, high mileage truck. I left our truck with him so they could see if the sound could be traced back to anything they worked on and off course they didn't hear it.
I'm going back there tomorrow to take him for a drive and show him the noise which I repeat only started after their work was done. Am I wrong to be furious and think this crap is completely bs?
View 14 Replies
I just picked up a 2010 f150 xtr 4x4 few weeks ago and I notice the bed shake is pretty bad when hitting small bumps int he road. I watch in my rear view mirror and it seems the drivers side is doing all the shaking, and the passenger side of the box seems solid (minimal movement like a truck should). It only shakes on bumps and does not increase with speed or anything so im assuming its Not my tires? I can literally feel the shaking in my feet in sync as i watch the box rattle in my rear view. Also look at my passenger seat and it looks like a vibrating chair, an extreme one.
I got under the truck everything looks solid, checked all the bed bolts are tight, i honestly have no clue at this point. I use to have a 2000 ranger and honestly I find the box shake on my new 2010 is just as bad as my old truck. My brother and cousin both have 2011 f150's and i find theres to ride alot nicer than mine. My truck is a supercab and theirs are crew cabs, however i don't see it making that big of a difference in ride? Checked tire pressures i have 30lbs in the back tires and 35 in the front. Like it said its only on bumps, doesn't start shaking on a smooth road, so im expecting some sort of bad suspension component?
trucks a 2010 f150 xtr 4x4 supercab with 18" wheels
View 10 Replies
I seem to be having a front end noise that only started up a few weeks ago.. The suspension doesn't make any noise over small bumps, only for larger ones. It makes the most noise when pulling into a drive way or something with a steeper grade from a flat street.
The noise I am experiencing sounds more like a scraping. It's not the power steering pump and it's not the brakes. Also, nothing is under the car that would cause this type of noise. It doesn't click or sound like a CV joint, I know what that sounds like. It also has no affect on any other performance of the car. I have tried jumping/pushing down on the car and it cannot seemed to be re-produced. Where I can start looking?
View 6 Replies
I'm getting ready to do some maintenance such as flushing the brake fluid, new air filter, and changing spark plugs. I've noticed lately a noise from what I'm assuming is my front suspension that can be heard when going over small bumps on roads at low speeds. It sound like a squeaky spring, almost like something needs to be oiled. I'm still on stock suspension with close to 80k on the clock, so I was wondering if there is anything in particular I should look for when I'm messing around the wheels bleeding brakes, or if there is a common procedure to lubricate something so the noise stops. I can hear it from inside the cabin so I imagine you can hear it from outside the car.
View 3 Replies
What am i missing i have a terrible clunk in the front end when i hit bumps. I thought it was the struts and mounting plates so they are new . no change Stabilizer links were tight but i replaced them as well. Everything else seems tight but the noise has not changed with any of the above mentioned repairs.
View 13 Replies
