Golf IV R32 :: Front Suspension Becoming Loose At Mounting Points Under Hood
Jan 31, 2011
So I have had my coilovers in for a little less than 2 months now and i have been noticing that my front suspension is becoming loose at the mounting points under hood and needs to be re-tightened periodically. I will say that unfortunately i have to drive in and out of some steep inclines and funny angles where it puts the car into tripod mode regularly. I'm not rubbing anywhere (fenders or bumpers) upon entry or exit but I am very low and really getting every bit of movement out of each corner, lots of creaking and popping (all from front, rears are fine) until tightened then its quiet again, but it all comes back after 3 or 4 days. I haven't tried driving for a week without hitting the steep inclines so I'm not sure if this is even the reason. But its the only thing that i can think of.
View 10 Replies
Advertisement
I have a sound that sounds like something is loose in the left front suspension area. A few weeks ago I put on VWR springs and 034 strut mounts. Then I got a tire rotation and alignment with in the same day. On Friday night it started making noise. While driving at any speed and the slightest bump I will hear the noise. There is no vibration in the steering wheel and nothing seems off about how the car handles. When I parked the car I tried pushing down on the front end and I didn't hear any thing abnormal. I jacked up the car today and I looked around and felt around on most of the suspension to see if anything was loose or out of place. I didn't notice any thing.
View 6 Replies
I am in my new gti, owned for 6 days, waiting for a tow truck. I was driving down the freeway when it felt like I blew a tire. I pull over to the side of the road and none of the tires are flat. I look under the car and a piece of the rear suspension has come loose and jamed itself in front of the tire. Its a long peice of metal with a hook on the end.
View 24 Replies
I owe a GTI autobahn 2015! I have problems with the front suspension (left side) sounds like is all loose, took the car to the dealer all they did is tight a bolt that is part of it! Problem still remain!!
When going over speed bumps and pot holes the front suspensions hit very hard like the shocks are not doing their job property!! This is causing the body of the car to start coming loose! I can hear some noises like an old car!!
Is normal or they need to be replaced,, i always drive in sport mode!!
View 3 Replies
I picked up a new CSG GTI, 6speed with Xenon and Bluetooth on Thursday. Yesterday evening when I got home from work I opened the hood to make sure everything was cool I guess. Then this morning I was going to open it again, and the release inside the car is loose, like it's hardly attached to anything.
MKVI? I know it's probably a cable issue, but it sucks to have to drive back 50 miles to the dealer, 2 days after buying it, because the hood won't open.
Pic: ........
View 2 Replies
I have recently replaced all 4 struts in my car with monroe quick struts. I have a 2002 Accord. Everything went wonderful until a few weeks later I heard a rattle from the front passenger side. Its a light "tinny" rattle, almost as if a bolt was loose and it was jiggling around. It doesn't happen every time and sometimes goes away altogether. I took it to my trusted mechanic, and they spend a good 45 minutes inside looking at things and overtightened everything to no avail. I have ruled out a defective strut (as I replaced it with one and the new one does the same thing) and I ruled out the stabilizer bar bushing (brand new OEM part I installed) and I ruled out the sway bar link (also new).
View 4 Replies
I have a '99 F250 w/ PSD with 165k miles.
When I drive, I move the steering wheel and nothing happens for the first few degrees of turn and then I encounter resistence and it turns. It's the same either way. The vehicle seems to track nicely, doesn't pull to either side, just a lot of slop in the steering wheel.
Is there a way to determine if this is really steering related or is it just loose/worn front end suspension parts making themselves known? My guess is suspension items, but the fact the front end behaves itself when the truck is moving has me doubting that just a bit.
View 5 Replies
I have a 2006 F-250 5.4L (6spd manual). I would like to add a second battery. It would be a purely auxiliary battery for radio use, and would be connected to a battery isolator. It would likely be a 33AH SLA, and starting capabilities are not required.
Any clean way to mount a second battery under the hood? On the driver's side, directly above the wheel well, there is an adequate amount of room for a second battery, and there are even tapped holes that seem to have identical spacing to the ones for the factory battery tray.
This leads me to believe that some version of this truck is offered with a second battery (the Powerstroke, maybe?). The local Ford stealership was all but useless, which is pretty standard. They have a solid reputation of not giving a crap about you unless you want to purchase a brand new vehicle with dealership financing.
What is the part number for a second, driver's side battery tray? I really am NOT interested in any kind of solution under than under the hood (no frame rails, or relocation to the bed).
View 4 Replies
My R is almost at 70k miles and the front end feels sloppy and loose. What is the best option to restore that new car feel or even get it handling better than stock? I already have United Motorsport strut mounts which definitely improved the handling. ECS has some suspension refresh kits (links below), but the question is which one should I go with? Would the Stage 1 kit with OEM replacements be enough? Or should I go with the Stage 3 with Powerflex bushings? I'm always down for upgrading rather than simply replacing. I'm sure that would get it handling real nice, but would definitely create a stiffer ride, right?
Stage 1 - [URL] ...
Stage 2 - [URL] ...
Stage 2+ - [URL] ...
Stage 3 - [URL] ...
View 3 Replies
What are my options here.. One tech said he can pull it down and weld on new flex pipes..
any advice with do.. CEL is on and B1 S1 is popping up. if you lift the hood you can hear the leak in front of the firewall.. and smell it.. ???
View 2 Replies
What is this supposed to go to? Found it just flopping around under the hood while we were replacing a fuse.
View 7 Replies
Mounting front license plate somewhere other than the "official" mounting location? I don't like the thought of putting holes in my front bumper. I can move it down a bit such that the holes are in the bumper just above the air opening. So, they would be less noticeable. This would block some of the airflow through the lower opening. But, unless I'm driving in 100+ deg temps, it probably won't matter.
I could also offset it to the right or left in the lower opening.
View 14 Replies
I'm looking for alternate jacking points on our car. I know we've got the ghetto scissor jack that comes with the car and fits where the frame meets the chassis on that little lip, but I hate using it because it seems so unstable. I'm an auto-xer and so changing tires quickly and often is a necessity....Where I can do a whole side of the car at once?
View 12 Replies
I recently bought a beautiful 2005 6.8L V10 Excursion with ~90k miles. While looking under the hood, I noticed a loose cable. See attached pictures. Where it may have come off?
View 2 Replies
I need to mount a plate on front bumper and there are dimples for 2 holes. Do I just use self tapping screws here as I've read you don't need a mounting frame?
View 3 Replies
I've been driving a 2009 Hyundai Sonata for about 9 months now and it recently (2 weeks ish) started to not shut its hood. I haven't gotten it officially checked out yet as I'm low in funds and don't want to shell out money where I don't have to. I know it's dangerous to drive around with my car hood open (like an inch which is noticeable). I would shut it before I start driving and when I reach my destination it would be up again. Someone (a random guy who pulled up next to me at a red light and told me he could give me a quote for my hood... and the dent on the side of my passenger door) told me it may be due to a loose hood release handle on the driver side. There was no give when I tried the handle (is this called the latch?) and when this someone tried to loosen the rust on the hood lock itself (is this the latch idk these car terms), it still wouldn't close. It would click but pop right up. It keeps clicking when I close it but doesn't fully close because I could lift it up about an inch and it'd stay that way. He said it may be due to a cable issue with the release handle.
View 2 Replies
I've tried replacing it, and while it fits in there nice and snug, within 10-20 minutes it vibrates itself loose again and I have smoke coming out from the hood from the oil spilling out onto the engine. Is there some easily-removable caulk I can fasten the oil cap in with? (so that when I need to fill it with oil I can still get to it, natch).
View 3 Replies
Is my car relavtively safe to drive?
I just took my car (1984 Toy Corolla DX) to the mechanic and the right front strut fell from its mount. The mechanic lowered the vehicle and reinserted the strut. I drove it home, ever-so-cautiously. Is the car safe to drive for emergency trips (pay bills, buy groceries) until I can get it fixed next month?
View 10 Replies
Attached is a video of my car going over speed bumps. It sounds like a rusty bed spring :/ I dont know what to do. The dealership told me that everything is fine, but i dont believe that.
On another side note, i am also experiencing misfires a lot, and the car feels a little under powered. I dont know what part to replace but i was hoping to get some info on what to do, and yes i took it to the dealer, nothing showed up on the vag and like the previous issue they said the car is fine!! My ideal situation is to have someone drive it and confirm that there's an issue, and then obviously to fix the issue.
View 7 Replies
I am having this issue when crossing a bump at high speed, it only sound when the shocks de-compress and only happening in the mornings so I think it might be the piston rod inside the shocks that is "getting dry" on the night and therefore making the sound in the mourning.
View 3 Replies
Aside from the clutch and gear changing noise, recently I've been noticing something that sounds almost like a rattle when going over bumps, say a series of filled potholes on a highway where they just slightly bump to move your wheel around, it's not that deep thumping you would expect to hear but it sounds like something is loose in terms of the suspension.
Happens on the front and seems like its coming from both sides. To me it sort of sounds like they forgot to tighten something up when they removed the shipping "blocks"/spacers, but I am not exactly sure what to check. I really do not want to visit the dealership at only 600 miles on the clock ...
View 5 Replies
