Installed the euroswitch yesterday because I want the parking lights to work in the front. All the lights work except for the front parking! In the second click I have the rear but no front. Am I missing something or do I have a bad euroswitch?
View 12 Replies1998 Passat 1.8t B5 sedan. OEM fog lights up front. No rear fog lights.
I recently upgraded to a "Euro" light switch to get more flexibility with my lights. Put tape on the TFL pin to disable DRLs in OFF Mode. Put tape on the 56d pin to disable DRLs in CITY LIGHTS (Parking Lights) mode. Completely successful -- no DRLs, just as taping the TFL pin on the original light switch accomplished long ago.
BEFORE I did any taping this time, I installed the Euro switch AS IS and tested all of its modes and physical positions:
(1) OFF: No fog light position available (switch knob will not pull out). As expected and okay.
(2) FULL ON Fog lights come on (but who the hell can see them?!?) when switch knob is pulled out one stop into the fog light position -- and the little front fog symbol on the switch lights up. Again, expected and just fine.
(3) CITY LIGHTS (Parking Lights): The fog lights position is physically available by pulling the switch knob out one stop... BUT THE PARKING LIGHTS DO NOT COME ON (regardless of ignition switch position, emergency hand brake position, etc., etc.) And the little fog light symbol on the switch does not light up. (Not surprisingly, pulling the knob further out to the REAR fog light position does nothing either.)
THIS IS NOT GOOD - since with a Euroswitch one ought to be able to manually select and de-select the fog lights while in CITY LIGHTS (Parking Lights) mode!
How to make my FRONT FOG LIGHTS available in Euroswitch CITY LIGHTS (Parking Lights) mode...?
So I just picked up an R32 and it has a euro switch and euro projector headlights but I've noticed that my parking lights, city lights, and front fogs are all inoperative. Though the turn signals do work. I tried doing a quick search but wasn't really able to come up with anything as to a reason why.
View 7 RepliesIve got a '14 Pip, no new mods all my mods are atlas 6 months old. When I turn on my headlights at night and make sure the dimmer switch, by the fuel tank button, inside the cabin, is dimmed, the headlights work, the front parking lights work, the brake lights work ( WHEN I STEP ON THE PEDAL), but they don't turn on when I just have the parking lights on with out braking. So, to clarify, the parking lights (the two strip that are used as brake lights (led)) they don't turn on. what could it be? Some fuse? I made sure to cycle the column stalk switch a few times, and the dimmer switch a few times. Could removing and reattaching battery fix it? Should I take it to the dealer (~85k miles).
View 17 RepliesMy factory fog lamps only work with the parking lights are on, when I switch on my headlights they go off. It's not the fuse since they work with parking lights.
View 11 RepliesI am beginning to think that I need a whole forum dedicated to my trucks wiring issues ... I finally got my reverse lights to work but my newest issue Is that while driving tonight i lost power to my parking lights, my instrument cluster lights, and my heat control lights... everything still works inside (gauges all act properly but they won't light up) and i still have turn signals and brake lights, and headlights. I really don't know where to start with this one. I don't have an owners manual so i can't figure out what fuses to check or what relays to look at. It is a 2007 f350 diesel....
View 9 RepliesI have a 2000 legacy wagon (245k miles) that has a light issue. The running lights and low beam lights do not work and the dash parking break light will not go out. Earlier I had just the low beams not working. They were both blown and I replaced them about two weeks ago. Now they are out again and the dash parking break light stays on. I checked the fuzes and they look good.
View 8 RepliesI'm at my wit's end trying to install cruise control in my 2009 Corolla. I thought it was a relatively easy install, but then after putting the airbag in place, I find that the horn no longer works. I test out the cruise control, and the green "Cruise" lights up on the dashboard..but it doesn't actually work.
View 9 RepliesSo i have been looking to get some new headlights with the projector housing but noticed that most of them have a fog light which my car does not have. I know in order to get them to work properly i would need the euro switch, but would i need to run additional wires through the firewall?
View 8 RepliesI'm having problems with my front marker lights. The turn signals work but when I turn on the parking lights or headlights they don't work. They only work with the turn signals. And I can't get the front side marker lights to come on. I've tried everything...
View 2 Replies2000 F-250 Super Duty
I was replacing my headlights, which required me to splice in their lights to my parking lights, and I seem to have shutdown ALL my parking lights. I did a test after twisting my wires together and everything worked fine. Then I soldered and heat shrunk them and somewhere during that process I lost all the parking lights.
I checked the 8th fuse as per the manual (for Parking Lamps) with a multimeter and it checked out just fine.
Figured it was the time to ask the experts on here where I should go from here. Are there some other fuses I could be missing, or maybe some else I could do?
Solved: Bad fuse in the #8 slot in the Power Distribution Box (under the hood, near Cab, driver's side)...
I had oem LED taillights installed to my car. Dealer coded the car to avoid error lights on dash. The problem is now the city lights under xenons look dimmed. Not as bright as before. I asked him why did it happen and he said that it's normal as it needs to balance the current flow to supply enough power to the LED taillights. I'm not satisfied with this answer though.
View 3 RepliesI just took delivery of a new 2011 golf and noticed the footwell lights were absent, presumably because Canadians always seem to get shafted. I would like to hear from other Canadian golf owners before going to the dealer.
If absent footwell lights are indeed standard for Canadian golfs, I'm thinking about installing them myself. I found a link on another site that details the install on an MKV : [URL]...
I installed the lights and they work fine but everytime I turn them on they throw a bulb out error message. I have the cold diagnosis turned off for the fogs and I still have it. Whats next?
Here is my coding. F78F8F2700041500470F0000000000000018110B5C00010000 0000000000
Where the front parking lights are on my Prius C 2. When I turn on my head lights I only see the headlight in the reflection in the car in front of me. Am I missing something??
View 1 RepliesI am going to install a BBK on the front of my car and I was wondering if I can take the larger front brakes and move them to the back of the car.
If not, any good set of drilled or slotted rotors for the rear brakes?
I would like to know how to replace the front parking lights on a 2002 745 i .
View 3 RepliesI have an '08 VW Passat with a 2.0T FSI Engine and both of my front parking lights aren't working. A while back, I got body work done on it and then it was returned to me with that warning sign. I didn't make a fuss because I got a really good deal on the bodywork and figured I could just look into it myself.
I don't think it's a faulty connector because all of the connections seem to check out.
I read a few posts about changing the front parking light bulb (I think the same a city light in some countries?) in a 2008 VW Passat B6 and it seemed a quite difficult affair. However, after performing it myself I realized it's very simple and shouldn't take more than 5 mins:
First locate the cover for the front headlights:
Then open the brackets on the bottom and top of the cover. For me it worked better to open the bottom bracket first. Just flip it down with your finger:
Then inside the housing, locate the plastic flap for the parking light bulb:
Just pull it straight back. There is no hinge or anything, so just a quick pull back should do the trick:
Change the bulb and re-assemble everything back.
I'm running a euro switch on my 05 V8 and I just noticed some weird battery fluctuations for specific light configurations.
In particular, if I run the parking lights (without the headlights)and the front fog lights together, the battery indicator jumps around between 13 and 14 on the console readout. For any other position on the euro switch, the battery charge indicator stays locked onto 14 (where I would expect it to be). I can reproduce the issue easily and haven't found another direct cause. There haven't been any other battery symptoms that I've noticed, so this one seems a bit peculiar.
After euro switch is installed on mk4 gli, the parking lights still remain on with the front fogs.The switch would be in the middle position. So the DRL's are off and just the parking lights are on until the switch is pulled out into position 1. Then the fogs come on and pulling out into position 2, turns the rear fogs on.
View 3 Replies