Going through the drive thru tonight and I heard a weird noise coming from the engine area. Get home and pull into the garage and here a flutter sound when my clutch pedal was pressed down, let go of the pedal no noise. While driving the car around clutch pressure seems fine and no slippage of any kind.
View 2 RepliesIf I'm at part throttle and i press the clutch pedal in about 2-3 inches, leaving the clutch still fully engaged, i can feel a really rough vibration in the clutch pedal. it stops vibrating as soon as i let off the gas. and i'm only giving it a little bit of gas, mind you.
If I'm at idle, and i have the clutch depressed all the way and rev the engine, I can feel vibration in the clutch pedal. My 6-speed MK4 did not do this, not in the slightest. Is this normal for MK6 or do I have a problem?
Ok, did an intake manifold cleaning on my 99 Accord the other day, and now I have problems...
Long story short, some time ago my car started to have a very rough idle. Took me awhile to find the problem. Turned out the air hose, between the filter and throttle body, had developed a big hole on the underside. So I replaced it and while I was at it used some throttle body cleaner, spraying into the intake manifold chamber. Lot of junk blew out the tailpipe. The car ran much better, but the idle could still be a little rough. I ran it that way for awhile, and finally the other day decided there was probably still some junk in there and it was time to really clean it out. So I took ff the throttle body and intake manifold housing. There was a lot of junk in there! The small intake on the passenger side was completely clogged shut. (I understand this isn't surprising on these cars.) I used a bunch of rags and 2 cans of Valvoline throttle body cleaner and a lot of elbow grease and cleaned it out. I was thinking to myself that whatever I didn't get with the rags flushed through OK, but I didn't want to take the whole intake manifold out.
So I put it all back together. (I took a video before I started, so I'm pretty sure it's all back together right.) But now I have problems. The car starts. It idles fine mostly, but can be a bit rough. But the trouble starts when I put the pedal down. If I do it in Park, well, if I push it quick the engine just dies. If I push it slow, the engine revs then quits, revs and quits, over and over. Similar if it's in gear. If I push it hard, the engine stalls. If I push it gentle, it revs up, but chugs along a bit.
I've run some seafoam through it, thinking it was clogged up with all that junk, and sure enough, lots of smoke comes out, but nothing is improving so far. What have I done wrong?
2010 Toyota Corolla 59 k kilometers ... I recently bought this car pre-owned by the dealership. I am having it inspected again next week on the Monday.
The car makes a continuous squeaky noise like metal rubbing together when the clutch pedal is not being pressed. The sound stops when pressing the clutch pedal. I opened the hood of my car while the engine was running and found that the part responsible for the noise, but I do not know what this is and wanted to be a little more educated before putting money down on a problem that i can't understand. The sound is heavier when the car speeds up or on high revs. It seems the piece in the picture is rattling.
I just got my R last week and I noticed that in first gear you can feel and also hear a creaking sound from either the clutch or gas pedal. I've read a few things and it has something to do with the Hinge of the pedal itself and I believe it can be solved with Lithium grease or something like that. Noticed this while in 1st gear?
View 7 RepliesHad a No start issue.Turn the key and nothing. Could hear the relays click so knew it wasn't the ignition. Could jump the starter via the wire on the passenger fender so starter good. Replaced the clutch position switch last night. Still have no start but now when I press clutch I have a tow haul light come on dash.If I press it again it turns off. Truck doesn't have tow haul option installed. I hear a relay clicking under the dash too. This is a 2004 Superduty (F550). Replaced the ignition switch today and still same.
View 3 RepliesMy 2004 Ram 2500 recently starting making this ticking sound. It only happens when it is in gear and gas pedal is being pressed. Sound like it's coming from the gas pedal area on the other side of the firewall.
While driving, if step on the gas hard, the ticking sound would also trigger a metal vibrating sound. It sounds like a very stiff piece of metal is vibrating, not a loose heat shield sound.
I can't step on the gas in gear and look in the engine or under the truck at the same time. And I also don't think it would be wise to do that. The thought of being under my truck while it is in gear and gas is being applied is not a safe or smart thought.
Ive got a 2011 Sonata GLS with 111k miles. I purchased the car new. For the past several months the brakes make a crunch or creaking sound when the pedal is being pressed OR released. The funny thing is it only happens when driving forward. When I apply the brakes while reversing, the brakes are silent. I did a pad slap at 68k and have taken everything apart, cleaned and re-lubed to no avail. The sound can be heard at the front wheels when someone else works the pedal while the car is parked. Pads have about 50% thickness. Pads? Calipers, master cylinder?
View 27 RepliesI have a 2004 Ford f-250 super duty 6.0 turbo diesel. I noticed yesterday that it was making a jet sound when i pressed the pedal and got louder as i increased the speed. When you let go of the pedal it goes away. I have asked around and some say it could be the turbo...the diesel mechanic THINKS it could be the fan clutch. The truck doesn't overheat and if i punch it i don't think i sense any loss of performance. All I know is that it makes this sound like a plane taking off.
View 14 RepliesOk, my question is, when gas pedal is pressed half or more down-ward, a squeal sounding is coming from engine compartment. 2003 ranger v-6 3.0 flex....
View 1 RepliesI have a 2011 GTI 6MT, APR tuned. I am unable to rev beyond 4000 RPM in neutral, or in 1st with clutch pressed. Parking brake on/off doesn't matter either. I don't rev my engine at stop lights or anything stupid like that, I just found this out because a member on here suggested that I rev the engine up to test for an issue with something else, and I found this 4000 RPM limiter. Is this normal?
View 10 RepliesI am at a complete loss as to what could be wrong with my 2002 VW Gold Cabrio GLX automatic transmission. In the last month the car has been to 3 different mechanics & none of them could solve this problem. The basic scenario: The car starts up fine. The engine will run & everything works fine (AC, radio lights etc).
If I put the car in Drive or reverse...it will idle & move. However, the moment I touch the gas pedal, whether in reverse or Drive, the car jerks & dies. If I put it in park & try to start it up again, the engine will turn over & the car will start, but the moment I touch that gas pedal again, same thing, jerks & dies.
Things that have been replaced so far: ignition coil, fuel pump, the catalytic converter has been removed. spark plugs replaced. Now they are saying that the problem is electrical & are working with the fuzes & wires. The car ran fine for 3+ years & I've had no problem with it.
Yesterday the mechanic called me & said the car was ready for pick-up. I go over there, pay him, I reverse out of the driveway & the minute I press the gas, it jerks & dies. Is this problem really electrical? Or is this third mechanic also grasping at straws?
So, I'm having this weird knocking noise on front left (drivers) side. It appears when I'm accelerating and stops immediately when i press clutch.. The noise gets stronger if i accelerate fast and gets faster, faster i go. Surprisingly the noise stops when i lift my car up and starts again at my drive height. Could it be driveshaft joints? And which one more likely? Outer maybe?
View 5 RepliesJust noticed a clicking noise every time I push the clutch pedal down, I had my wife push the pedal while I listened under the hood and no noise it's coming from the clutch assembly under the dash! It's a 2013 only 4000km's on it so it's not like anything should be worn from over use etc. It's when I had the radio off driving I heard it, not super loud but more curiosity if it's normal noise from a clutch assembly.
As well the odd time I hear well my wife heard and pointed it out to me, when I push the brake pedal (more when we get in the car in the morning after sitting overnight) the same kinda sound more like when brake pad's are gently popping loose I guess you could say!? Like I said its mainly only after sitting for awhile, but we did hear it the odd time just as I go to slow down and only a quick 'click' again not deadly or anything more annoying that the car is brand new and we went brand new cause we were tired of creepy older cars we'd previously driven! I'm wondering if that may be exactly why its doing it since its new and need's to be used a bit to loosen up, this is the actually the first brand new no previous drivers car I've had!
M/T 2010 Sonata. I'm just out of warranty at 102,000 mi. No issues before with clutch. I noticed a clicking or crunching sound when pushing the clutch pedal down. I took a gander and noticed the pedal was traveling farther than it used to because there were indentations in the carpet. So this happens for about 3 days. Then I start the car and cant get it into gear. If I shut it off, it easily goes into gear and I can drive. Usually it is ok after that point but is getting worse. Mechanic briefly tried to bleed it but the pedal stayed on the floor. He was able to get it to its original problem but said if he replaces the master & slave cyl then might as well do a new clutch. Because I had no slippage, no pedal issues or anything prior to clicking. Is 102k miles and 6 years usual time for these components to fail?
View 2 RepliesOk, driving home tonight from boarding (semi hard driving) car started running and shifting weird, loss of power, weird shifts in drive. At first red light I could hear a sucking sound when the throttle was pressed,or downshift tranny in manual mode. If you put the car in neutral going down the road and stab the pedal about the third time throttle will maintain 3g rpm. Babied it home, popped the hood blipped the throttle and there's def. a huge sucking sound coming from engine bay. I lightly sprayed intake/vacuum hoses/airbox etc with starting fluid and no change in idle. cant see anything loose. WTH?
View 24 RepliesI started having a strange clicking sound when pushing down the clutch pedal. I have 43,000 miles on it and I have driven the clutch well(I really don't believe I already worn it up). It goes away and then it comes back. There is no problem on shifting from gear to gear, it works just fine. It is only when I push the pedal that it starts clicking like it pushing against something. The car dealership was so useless, they said I need a new clutch and that warranty does not cover it because I may have been using the clutch badly. Also do you think that they have the right to tell me it is my fault even though I have the extended warranty for 100, 000 miles.
View 6 RepliesI've been noticing that when I step on it some times my clutch pedal seems to get stiff and if I press on it a couple times its normal again. This has been going on for awhile now and I've just been driving it normal but when I do decide to get on it then the pedal will get stiff..
View 4 RepliesCan switch out the R's clutch pedal for the Audi R8? Was in an Audi showroom yesterday and there was an R8, and it was actually open. It was manual and the clutch placement was perfect, way better than the R. I've got short legs, but the R8's reach was great. The R is a bit long for me.
I know that there is compatibility across Audi/VW platforms, but I'm not sure of the R8. The TT is compatible for sure but I don't know if the clutch pedal is the same or not.
Just as the title states. When I put the AC on in the car my clutch pedal gets some play in it, enough that it messes up shifting and gets jerky. I tried searching, but no results
View 14 RepliesOk so I took my R out to look track to get some 1/4mile passes in. Didn't do anything out of the norm. Took my first pass and noticed that much clutch pedal wasn't feeling right. It wasn't grabbing like it usually does, it was grabbing close to the floor. I took it out of gear and pumped the clutch peddle a few times and then it grabbed like it normally would. I've never had something like this happen in any of my VWs or any other car. What may have happened? I was thinking maybe a slave cylinder issue?
View 7 Replies