During the removal of my hood. I've broken my fluid line for the windshield washer. Not sure how to replace or if this is able to go back in my hood, I've searched and have fallen short to a decent answer.
View 4 RepliesMy washer fluid leaked out of the bottom of the reservoir and I would like to pull the fuse because it keeps beeping it is low. obviously. I do not have a rear wiper as it is shaved so #27 fuse is out and I was wondering if I pulled # 24 if that would stop the damn sensor or if I can pull something else, maybe just unplug it from the reservoir. I find myself using it never so I wont be fixing it anytime soon.
View 1 RepliesI've got an '08 R32 I bought in May, before that I had an '07 GTI, so I know the cars pretty well. I have a couple of issues with the R that I never had to deal with on the GTI .
1. On my GTI, the rear windshield washer was a very strong stream the shot straight up. On the R, I've noticed it is weaker, and recently, it barely sprays half of the area, and it also moves with the wiper, from about straight up and over to the left. Any adjustment to tighten it back up, or if it is supposed to move.
2. I just had a brake light burn out Monday. I know I need to get behind the plastic and undo the nuts to remove the brake light assembly, but I have two questions: First, what are the make and model of bulbs used so I can pick some up to change at home.
To me it sounds like a windshield washer sprayer trying to squirt w/o any fluid or a print head moving and hitting the end and try for a brief second to keep moving. I notice it when I first turn on the car and it is about every 8 ish seconds. Tried to capture it but it is too faint to pick up on cam. 2011 Gti, 39k
View 8 RepliesSo my windshield washer fluid sensor popped on a couple of months ago, checked fluid (was full), I concluded that it was a failed sensor. I ordered a new one from ECS, put in last wknd, and finally: the low-level warning light disappeared. A few days later, I was adding some fluid into the reservoir (it was a new bottle and had no funnel) and I spilled a few drops. The spilled amount seemed to drop near the sensor plug, but didn't think it was a big deal. Went into work, came out later to head home, and you guessed it: the low-level light came back on (with a FULL reservoir).
I removed the plug yesterday, blew it out, but it didn't change a thing. Anyway, is it possible the sensor shorted because somehow some of the fluid go into the connection? If I hookup the vagcom, will I be able to tell if there is an issue (I know it didn't before when the first sensor failed). Is there even a fuse for the fluid sensor?
Windshield washer fluid light is on but reservoir is full.
View 8 RepliesHas encountered a strong odor of washer fluid when using it on your windows. I was driving to work this morning through a snow storm and needed to use my washer fluid for the first time. As soon as I turned it on the entire cabin was filled with that smell. Could this be a leak?I thought it was all confined within the engine compartment so not sure why I smell it immediately upon using.
View 14 RepliesI removed my washer fluid reservoir and saw that I can just twist together the wires and it would keep my light off. That lasted a few days. And now the light is on. I tried soldering them to see if it was a bad connection but still the light is still on. How I can get it off?
View 5 Replies2003 Passat B5.5.
Every time I refill the bottle, the next morning I always find the fluid under driver's side bumper on my driveway.
Recently the low windshield washer warning light came up on my dash. I rarely use it so found it weird. As I thought it was pretty full already. The warning only show up when its around 4 degree Celsius and doesn't show up when its around 10 degree.
View 5 RepliesRecently the dash display indicated that I needed to add washer fluid. I was surprised that it would be low since I rarely use it and had not done so lately.
Yesterday I added water to the bottle and heard a trickling noise as I was doing so. To my surprise the water was leaking out below the car! The bottle remains empty.
Like the title says I dropped about a 2 inch piece of small washer fluid hose in my cylinder while evacuating the oil from it . Will it damage the valves If I ran it? Any way to remove it without removing the head?
View 14 RepliesI recently purchased a 2009 Camry XLE with 14,000 miles on it. So far so good other than the windshield/dash noise rattle when it is cold which I have searched on found a fix. However the other challenge I am having is the windshield washer fluid is leaking. It is a toyota certified car (warranty for 12 mos/ 12,000 miles) so I figured the 160 point inspection was completed expecting they would have topped off all fluids. I filled the washer fluid to where I could see it in the neck of the container. I walked back into my garage to put away the washer fluid, while walking back towards the car I could see something was leaking from under the car. It was leaking from a hole of the plastic directly under the car that covers everything up so you are unable to look up into the engine compartment. What may be causing this leak? I would suspect about 10 to 14 oz leaked.
View 6 RepliesReplacing the windshield washer fluid reservoir? Mine is leaking badly. I think I need to take off the front driver side wheel but I am not sure.
View 2 RepliesI have a leaking washer fluid reservoir. Spews out under the car when I try to fill it up and then get the low washer fluid warning. Have always used washer fluid -20F formula.
View 6 RepliesWhenever I use my windshield wiper fluid it smells like Elmers glue, its weird, I never had anything like that before in any other car. It still cleans just fine I am just curious.
View 5 RepliesNoticed that the windshield washer fluid level is ALWAYS low, needing significant amount to refill, even when not used? I'm not talking weeks or months, so that evaporation could be the cause, but rather DAYS. No evidence of leaks under vehicle, either. What could do this?
View 18 RepliesI can hear the sprayer motor when I activate the toggle, but no spray from the squirters! (in the past I've encountered this on a honda, usually we'd just pull the squirter and soak it in a cup of solvent then pop it back on after shooting it black) but on the B6 it looks more complicated!!!
View 1 RepliesI have a windshield washer fluid leak. It's leaking onto the passenger side floor under the dash. Any have a good place to start looking or how to access the area it might be leaking at?
View 6 RepliesTranny fluid spews out pretty good underneath. Is it likely a broken hose? Where do I start?
View 3 RepliesI just picked up a 2014.5 Camry (my 1st Toyota) and how full the windshield washer reservoir should be at max level. Now hear me out before you fall off your chair from hysterical laughter, if I fill up the reservoir up to the lid like every other car I have owned, after a short drive it will go down and be below the filler neck, clear down under the fender even though I haven't sprayed the washer fluid.
I haven't seen any fluid dripping but I believe I have a leak. Sounds pretty cut and dry but I'm asking just incase Toyota has a weird fill level on the washer reservoir.