I have a mk4 jetta that I bought a couple of months ago it is a 1.8T 5speed and the last 2 days of driving it 3rd and 4th gear maintain in place like they should but when I try to give it gas the rpms skyrocket and the car does not move, it is like as if it is in neutral while still in gear....What the problem is?
View 3 RepliesSo today I was driving my car and everything was fine. I get to a freeway off ramp. I put it in first and it goes like normal I shift from first to second and then into third when i shifted into third, I hear a grind sound like I miss shifted or something. I continue on and when I get to a red light I go to take off in first and nothing...The car wont move!! I have the clutch all the way out and its in gear and nothing... I can have the car running and the clutch out and i can shift it in any gear and nothing happens. I have a spec stage one and an 8lbs smf in the car and before i could hear clutch chatter and now when i have the clutch out I don't hear anything? What is causing this?
View 3 RepliesI have a 2004 2.0L Jetta with a 5 Speed manual transmission.
When shifting into third gear sometimes I push the shifter forward and it does not want to move all the way forward. It feels like I am pushing the shifter knob against a wall, or more accurately the bottom of the shift that pulls the cables feels like it is hitting a wall. If I pull it back out and press it in hard it will go into place sometimes.
This also solves the problem: While the shifter is mid shift into third, at the wall/ at the point of resistance, I let off the clutch slightly to give the flywheel some friction. This rolls the transmission a bit and allows third gear to slide into place.
I have experience with a MK4 Audi TT 1.8T that cam with a 6-SPD and it at had a 1-2 and 2-3 synchronizer issue (The one where the nipples are worn and it grinds at higher RPMS because they can no longer make a firm handshake). The issue I am experiencing is not that.
Could it be the transmission cables? Could it be some other cogs in the transmission? - If so does this mean I need to buy a used one? My car has 180K miles on it with the original clutch.
2012 6.7l CC SB SRW 4x4.
Truck has 9700 miles on it, bought it in December of 2012. Twice in the last week, when at about 60 mph on a flat road, maintaining speed with virtually no wind, there is a slow, gradual shudder from the rear wheels. Both times the truck has been on cruise control and if I add power, the truck does not accelerate and the shudder continues to increase. If pull power either by brake or canceling cruise, it stops and the truck performs as expected.
I have yet to have the time to reproduce this. My only hope is if the dealer is already aware. I plan on trying to reproduce it at some point with hopes of having something tangible for the dealer.
With my previous cars I only had to put the car in gear and it would not roll or move. However, the first night I took my R home last week I woke up to the car which had rolled half-way down the driveway. Now I always use the e-brake.
View 6 RepliesI have a 2003 Jetta Gli with a VR6 manual transmission 6 speed. So the other night I am pulling into this store parking lot and all of a sudden my car is just rolling its still in gear and running but when i push on the gas it just revs the motor i thought i was in neutral for a second but I wasn't so I jump out and push it into a parking spot.
Car is running but when i put it into gear and let off the clutch it just revs. so i have i towed to my house it was late so i decided to look in the morning.
So I go out the next day its still the same only now when i let off the clutch it just dies. I'm not an auto mechanic expert by any means any car work i have done is just self taught as needed diving in and figuring it out myself.
I did do the Cv axle on the passenger side last year i bought the one from O' Reilly auto parts. I know its the cheap one and probably a no no. Could this be my cv axle? Did my clutch go out? It moves through all the gears except reverse when the clutch is depressed. Could it be my transmission?
I just changed my oil in my mk4 jetta 1.8L and after draining the oil, changing filer, and adding new oil, the car will not move in drive or reverse. Once I give it gas it will move but that's at the higher rpms. I am almost positive I didn't remove the transmission oil but I am just not sure.
View 12 Replies2000 VR6 automatic. Yesterday my car was stuck in park couldn't move the shifter . Figured it was the brake sensor switch when the brake is engaged food pedal lights do not go out, I replaced it this morning but still won't work I've been driving it around in limp mode?
View 4 RepliesCompletely stock, no swap. No motor noise when I click the buttons on forward, back, up or down. Nothing. Everything looks connected under the seat but not entirely sure. Fuse 1 and 44 are good on the side of the dash. This is for a 2003 Wagon with GLX interior and most upgrades from the factory. I need to move the seat in order to remove the center console/radio cage as it's blocking the armrest nut.
View 1 RepliesSo I took my tranny off to fix a broken dog bone mount bolt problem. I am now in the process of putting it back on. I raised the tranny bolted all the bolts on had everything almost back together and I went to put my slave cylinder in and the clutch fork won't move so that the slave cylinder can slide in. Did I maybe put the clutch fork in wrong? pretty positive I put it back in as it was and slide the clip through the hole and everything.
View 11 Replies2012 GTI 6 Speed
Both needles bounce while maintaining a constant speed, example going 80mph in 6th, RPM moves +/-100ish RPM and speed is 1-2 MPH. The car doesn't actually move, just the gauges. Engine doesn't sound like its miss firing MPG was 30 going 80 so it seems to run just fine. Going through the gears playing around its smooth and normal.
I'm on a road trip so very limited on anything to diagnose, just looking for some insight.
At times my windshield wipers stall halfway up my windshield or move really slowly. Other times absolutely fine, I already checked both battery terminals and niether were the issue. What's the best way to get to the wiper motor to check the connections. Or does it sound like a ground strap issue elsewhere on the car.
View 5 RepliesI've got a 1.8T 2004 automatic and the problem I'm having is the shifter is harder to move since the weather's been colder. It shifts very well and is responsive, it's just that I have to pull it harder to select P, R, N and D. D is especially hard (no pun intended you sick minds! ) to select, the shifter kind of stays in neutral but shifts after a bit. Is there anything I can do to fix this?
Side question: is the rear defrost supposed to turn off after a certain period of time? My 2002 golf does it but the jetta doesn't.
Background facts:
Tranny swapped from my 4 speed auto to a 1.8t o2j 5spd
13lb. Light flywheel
Powerflex dogbone mounts
Peloquin LSD
The problem: Very hard to get a smooth shift from gear to gear. Trust me, I know how to drive, but I can always feel the car shifting into a different gear if you know what I'm saying. On my friend's bone stock Jetta, I just let the clutch out without gas in between shifts and you don't feel a thing.
On my car, you feel EVERYTHING. People have told me the light flywheel will make the ride more uncomfortable in many ways, especially since the RPMs drop much quicker in between shifts than stock.
I'm most likely picking up a 03 jetta glx vr6. Thing is the 6th gear is out. Is the entire transmission about to break or is it a common thing?
View 16 RepliesLLast night I was driving. I got off the highway and pulling on to the main road in 2nd, I ripped on it and went into 3rd quickly. It basically kicked it out of gear, and didn't seem like I had any other gear besides 1st or 2nd. Got to a local gas station in 2nd, and I originally thought my linkage had come off. While trying to back into a spot to make life easier, there was no reverse. seems like the trans is binding up. Aligned the linkage anyway, when the car is off, it goes into every gear, but when it is on, it feels like 1st-2nd-nothing. If I roll the car backwards and then forward, I have 1st. Other than that, it will not engage. If I put the trans in reverse and then try to back up, it feels like the trans is binding. Same with 1st, unless the car is running. Traction control light will not turn off either, will have it scanned this week to determine that issue...
Ive seen most people have issues with the 1st-2nd shift fork and have this causing the reverse issues.
2005 GLI 1.8t
The car was starting to have issues going into gear after a night of cruising. Then I was experiencing what I am thinking was clutch creep. The clutch would be down and in gear and the car wanted to slowly roll.
What I have done to try and fix it:
I have bled the system many times to get all the air out(i believe), and also readjusted the the linkage. NOW, the car will not go into gear when it is on but will when it is off. I have the car on stands at the moment and it will shift through all the gears when the car is on just the wheels spin since it is in the air.
The clutch/flywheel/pp/throw out bearing all have less then 2k miles on them. Tranny fluid has been replaced with Penzoil syncomesh. I have yet to ever do a hard launch.
Clutchmasters Fx400, OEM DMFW.
Car is an 02m trans w/o the black cap in the side so I cannot do the washer/gasket mod for clutch creep. Believe I have to order NLS shim kit and put behind the throw out bearing.
Over the past couple weeks sometimes when i turn my car on it wont rev above 3100 rpm in any gear. The car is a 5-speed jetta 8v 2.0 and I'm just looking for any insight as to what is causing this problem. My check engine light is on and i had the codes read and there was a bunch, "catalyst system below threshold bank 1", " ignition coil A,B,C,D circuit primary/secondary malfunction", and "camshaft position sensor "A" circuit high input". I'm not sure if these codes are related to the problem but i had to have the whole top end of my engine rebuilt not even a year ago and all of the ignition coils and sparkplugs were replaced during that time.
This problem does not occur every time i turn the car on however, i did notice that sometimes when i go to turn the car on instead of the car starting in quickly, it will start hard after sever cranks and this is usually when i have this issue. it is very weird almost like there is a rev limiter on and i can usually fix the problem if i get up to highway speeds and downshift hard into 3rd and the car will shudder once or twice and will drive like normal again. What could be wrong i was thinking it might be a bad O2 sensor or a vacuum leak somewhere.
Just to clarify what i mean by it wont rev past 3100 rpm i mean that i can start from idle and accelerate normally and when it gets to 3100 rpm the power goes away and will just stay there even i put my foot all the way down. I can shift up and the same thing will happen i will accelerate normally but then once i reach 3100 rpm again it will stay there.
Have a 20th with the 02m six speed ... Car won't go into any gear, except reverse ... Tried with the car off or on, clutch in and out with no luck ...
I took off the linkage from the engine bay and can only manually get the car to go into reverse ... Feels like it can't change "levels" ... Don't think it's clutch since because the car won't engage a gear even with the car off ...
Tried searching and no luck ... Thinking shift forks but hoping not since don't want to drop the transmission and it could be something else ...
I bought my first vw about a month ago. It's a 2003 GTI 1.8t with what I THOUGHT had a 6 speed transmission in it when I bought it. I hate to admit it, but when I test drove it, I never had a chance to put it into 6th gear.
Anyways, I replaced the shift lever, and shift cable (bad Bushings on cable and you can't just buy the Bushings) because it was hard to get it onto 1st gear without pulling the boot up, and pushing that metal part down. (I don't know the actual part name). Anyways it shifts great now that I have the cables adjusted however it will not go into sixth no matter what I do.
This leads me to think that maybe someone put a 6 speed knob on a 5 speed lever. However, the wear on the knob is exactly the same as the wear on the steering wheel. The guy at the local dealership told me he sold me parts for a 5 speed shifter box and that the 6 speed linkage is completely different and I 100% have the 5 speed trans.
The issue with the car is that the tranny won't go into any gear. With clutch in or out. I had very little play left or right or up and down. Not sure what could be wrong. The car has 120k miles and no mods.
View 2 Replies