Golf IV / Jetta IV :: Started To Sputter While Shifting To 3rd Gear
Jun 29, 2014
So yesterday my car was running as fine as it always has. Then today came around...Car started fine, shifted into first and second fine, but when I hit 3rd it started to sputter in the low rpm's. Around 3000 it picks up a bit. This then continued happening through all of the gears. I noticed that the engine light was flashing for a few seconds and then went away completely. It still putters, struggles, and shakes when accelerating in the low rpms but its not throwing any codes. I know there are a few things it could be i.e. vacuum pump, bad coils or plugs, are maybe something more serious (fuel pump maybe?). I'm at a loss, especially since the car is throwing no codes (so there is nothing to scan for). I was hoping vortex could give me somewhere to start on this, I don't have a VAGcom so getting it scanned means $$$ and I want to get a start on the problem before I go that route. Here's some basic info:
Its at 182,XXX miles. Its never thrown any engine light or cel code in the 2 years 40,000+ miles i've owned it. I run 0w 40 eurpean car formula oil through it every 3-5k. I run seafoam through it every 6 months. I'm NOT sure when the last time the coils have been replaced.
View 3 Replies
Advertisement
I have a 2003 jetta 1.8t. Just recently it hasn't been shifting from 3rd to 4th gear. It will when the transmission is cold but once warmed up it will no longer shift into fourth gear. Just looking for some possible solutions. Going to check the fluid this weekend.
View 1 Replies
When I was driving on Friday I noticed that moving into 2nd, 4th, and 6th were "soft." I could hardly feel it engage into those gears at all so I thought maybe I would adjust my linkages. So I adjusted my linkages and while sitting in my drive way everything felt solid. When I took my car for a ride down the street I could feel it engage 1st, 2nd, 3rd no problem but after driving around for a few minutes my 2nd, 4th, and 6th gears felt soft again and then it got worse where I couldn't even shift into those gears anymore.
So my R, 1, 3, 5 all worked fine but didn't have 2, 4, 6. After taking a look at my linkages and I pulled off the selector cable and and shifter cable end. I noticed that on the shifter cable end that it felt wobbly and on the selector cable end it was rock solid. I am just wondering if the shifter cable end being worn out could be my issue? Is the shifter cable end supposed to have a little play in it and be wobbly? Or is there another issue I should be looking for? Here is a video of just how wobbly it is. [URL].....
View 13 Replies
So I have a 2.0L jetta with 160,000ish (daily driven) miles. And I'm starting to see a bit of a shifting issue mostly into third. Seems like I get locked out of the gear while shifting from second to third. I have to push it in(catches the "lock out") then I pull back and push forward again and it pops in. I rarely miss gears or grind. And I've noticed only a few times it does it in fourth as well. No grinding (unless I try to force it super hard) just won't let me go into gear.
Also while on subject of gear issues...
When I go into reverse, after the car has been sitting over night or for a longer period ( I would say between 8-14 hours) it will act up, almost like I am trying to drive with the parking brake fully engaged. In order to make it stop such bad behavior I have to rev it higher and it makes a *pop* or *crack* noise. Then it reverses just fine.
I've done a little bit of searching, "Look for a binding in the engine bay" and I have looked and haven't found much.
View 2 Replies
I come today for a apparently transmission problem. I have an automatic VW Jetta 2000 2.0 that i bought a few months ago, the car is great, has 250K miles.
The problem is in the morning when car is still cold, the transmission isn't shifting gear until 3K RPM (For 1-2 is about 2.5K RPM, and 2-3 is about 3K RPM). After 5 minutes of driving all back to normality and transmission shift gear about 2.2K to 2.3K RPM.
The question is: this is normal?, what could be wrong?.
View 7 Replies
1999 Jetta MK4 with only 124k miles on it. Everything is fine with the car except when the car shifts from 2nd to 3rd it is jerky/violent/forceful everything else is good with car except check engine light is on but I don't really care about that and I'll go check with autozone to see what the code is. I am able to feather the gas when I know its going to shift and I can make the shift pretty smooth. My question to all the experts is does this mean that this tranny is on its last leg or does it still have a lot of life left in it. My old Cabriolet did it for years and never was a problem.
View 5 Replies
I have a 2004 2.0L Jetta with a 5 Speed manual transmission.
When shifting into third gear sometimes I push the shifter forward and it does not want to move all the way forward. It feels like I am pushing the shifter knob against a wall, or more accurately the bottom of the shift that pulls the cables feels like it is hitting a wall. If I pull it back out and press it in hard it will go into place sometimes.
This also solves the problem: While the shifter is mid shift into third, at the wall/ at the point of resistance, I let off the clutch slightly to give the flywheel some friction. This rolls the transmission a bit and allows third gear to slide into place.
I have experience with a MK4 Audi TT 1.8T that cam with a 6-SPD and it at had a 1-2 and 2-3 synchronizer issue (The one where the nipples are worn and it grinds at higher RPMS because they can no longer make a firm handshake). The issue I am experiencing is not that.
Could it be the transmission cables? Could it be some other cogs in the transmission? - If so does this mean I need to buy a used one? My car has 180K miles on it with the original clutch.
View 5 Replies
Car in question is my 2003 Jetta 1.8t with the 09A 5 Speed Automatic. For the past 2 or 3 months these have been the symptoms: 1st to 2nd gear, very hard shift depending on RPM's (Higher the RPM's the harder the shift) 2nd to 3rd gear, not really hard but it kinda 'flares' the gearbut still shifts. All other gears are fine, although if you accelerate hard out of 4th it will have a little bit of a hard shift. I'm thinking either solenoids, or the speed sensor?
View 1 Replies
I purchased a 2002 gti in Febuary with 161k miles. I believe it was a couple weeks after I bought it - it started making this creaking sound. At first it was more rare to hear it but it occurred going on uneven surfaces like up a steep hill or around an uneven turn or even stopping and going. It basically happened when the front end pitched up/down. It sounds almost like a rubber creaking or even plastic. (Some sort of bushing maybe? I'm no expert) Now it is rare for it not to make the creaking when taking off or slowing to a stop. It only occurs at lower speeds like right when taking off or at the very end of the stop right before the actual stop.
It will even slightly make the noise when accelerating in second gear right after shifting. (This is occasional) When I come to a complete stop and turn the wheel side to side ot will make the sound for a couple of turns and then go away. I have tried rocking the car and pushing down on it to replicate the sound. No luck. I lubricated various bushings and parts with silicon. It seemed to fix it but it only lasted for a few hours. (This could've been coincidental) It doesn't make the sound 100% of the time though. Probably at least 90% though when coming to a stop and going. It seems as the environmental factors (Temp and humidity) have a small effect on the creaking. I have a neuspeed 25mm front swaybar with endlinks.
View 2 Replies
I have a 2001 mk4 golf 1.8T, tonight I was driving and all of the sudden the gear changes started clunking really rough ( it's an automatic) and then it would pulse for power only give it to me at random not when I gave it gas, coming to the next stop sign I pushed the accelerator to go and for the first 3 seconds nothing happened until it jumped in revs spinning tires and shooting me forward, so I shut off all the electronics in my car which seemed to work with the not getting power issue but when I finally got to where I was going it now won't turn over, you turn the key you hear the starter try but that's it it just won't turn over, there's no check engine light and I already have a call into my mechanic.
View 7 Replies
I had my transmission fluid changed because it was leaking from the pan. I did the job myself but called VW to confirm how much fluid I needed. They told me the wrong amount but we realized that after we did the job.. they did the repair for a huge discount and I only paid $200 bucks for the work for them to "fix" what they messed up. Volkswagen did it and I got the car serviced at the end of April basically. now its the first week of July and under 90 days since the car was service and now it is shifting hard between 2nd and 3rd gear or 35 miles to 45 miles per hour. The car isn't throwing a transmission code I have a vag com and there is no code coming up on that.
View 1 Replies
Have problem with Golf IV 1998 1.6 74KW.
Ignition is troublesome, takes few seconds to start. RPM stays still at 800 idle but when pressing down gas pedal it takes few seconds to accelerate to 2000+. While driving engine starts to sputter under 1500-2000, happens after every gear shift. 2000+ does not sputter much but car still feels very weak.
Everything works fine at the morning or several hours after last ride. Problem starts when car hasn't run in 15min - ~1hour, problem seems to go away only in several hours.
View 2 Replies
2000 GTI GLS 2.0L ... I understand I need to replace the Ignition Coil Pack on my car. I have looked on ECS Tuning to find the coil pack, but from all the pictures I see of other people coil packs they look nothing like what mine do. So I'm wondering if they are different for my specific car? So the issue that I have is my engine sputters sometimes, but more so when is wet outside. Its only cylinder 2 misfiring currently, and I replaced my Fuel Filter and Fuel Pump already in the past 4 or 5 months. Also a local shop had done some work recently and I know they had replaced the spark plugs. So I'm just wondering what coil packs I need for my car, and how I would go about replacing them. From what I saw online with other 2.0L (They weren't GTIs tho) was that the coild pack was behind the SIA pump or something like that, and they are a small black box. It looks to me that my coil packs are inline above the spark plugs and cylinders?
View 2 Replies
I have an 04 Accord EXV6 with 237K miles. I have recently replaced shock absorber assemblies and all 6 motor mounts / transmission mounts, which resolved most of the loud "clunking" noises. However, I now have more of a "rattle" sound which I hear when one of three things happens...First, when the engine is started (typically when the engine is cold). Secondly, when shifting between park, reverse, and drive (also, more common when engine is cold). Lastly, when driving over rough roads or potholes at slow speed. The sound is the same in each of the 3 conditions, and appears to be coming from the right side. It doesn't seem to me that any bushings, control arms. etc. would be the cause since the same sound is heard during startup or gear shifting while the car is sitting still.
View 16 Replies
I have an 05 mk4 GLI. Driving to work today my car started to sputter a bit and the yellow caution triangle with the arrow circle around it turned on. It wouldn't let me accelerate and when it would change gears they would slam into place. Right after that my check engine light came on. is that triangle traction control?? Ive read many different threads but couldn't really find anything.
View 3 Replies
My car recently started running overtemp not much, but enough to bother me. I flushed the system with no change. after about a week with continued symptoms, my trans started shifting hard between 1st to 2nd and 2nd to 3rd, and running rough in general, sputtering lightly in high gear. I assumed it was running over temp with the rest of the car, so I replaced the radiator and the radiator cap, yet still am having the same problem. Is it still related to the cooling system? if I replace the water pump will i solve my problems, or is it really a hidden trans problem? I'm fairly certain the trans has never been serviced, and I'm reluctant to do so given the high milage, 174,000. The fluid is full, but its very thin, and no longer red, its sort of a pale yellow.
View 19 Replies
Shifter seem like it is way too loud going from gear to gear? Just holding in the clutch and rowing from gear to gear...seems way too loud, Seriously sounds like shifting gears in my old 5.0 mustang.
View 1 Replies
I have a 2001 jetta 5 speed. While driving yesterday, I had trouble shifting into second gear. When I took the car out of second, I would hear a slight popping sound. Shifting into the other gears was fine.
View 2 Replies
My wife and I recently purchased a 2013 Jetta and have noticed some abnormal lag when accelerating. It's an automatic transmission and the gear shifts aren't as smooth as they should be. I have read that it is possibly related to the drive by wire system and may just be an inherent result of that system.
View 4 Replies
I made a horrible decision after my Ranger got totaled and bought a 94 Jetta... When I first got it, the car had trouble starting in the rain but eventually she would fire up. If I drove it immediately away after finally starting, it would jerk really bad when I gave it gas while shifting, until 4th gear. Once she ran for a bit it would smooth out. Nowadays if it rains the car won't start at all, just keeps turning over and I have to wait for a nice dry sunny day then it starts right up.
My mechanic worked on it recently and replaced a sensor in the distributor and the crank shaft sensor, because they showed up on the diagnostic as bad. Once his work was complete, he said he sprayed the engine with water and it started. So that was a week ago and it's raining and it won't start, the engine just turns over so it's not a starter issue. The car only has 143,000 but I am gonna get rid of it this fall but I just wanna know what this wet weather problem is.
View 3 Replies
So, I got in my car this morning, it started fine, no CEL, pulled out onto the main road and while while accelerating, it started to sputter and the CEL flashed several times. I turned back into my neighborhood, expecting it to stall, but it didn't. I sat there for a second, it was running fine, but I felt a few slight rumbles while idling, enough to make me nervous, but not enough to prevent me from continuing to work (I'm out of PTO).
So, I continued on, no CEL, accelerated and the sputtering happened again, slowed down, lightly pressed the gas pedal and it was fine. I made it to work. I just got the APR programming on Monday. I ordered the TT225 diverter valve.
View 3 Replies
