Golf IV / Jetta IV :: RPM 2900 In 5th Gear Is Normal?
Oct 4, 2010
I have a 2000 jetta 2.0. In 5th gear im turning 2900 rpm is this normal?i find it high....
View 24 RepliesI have a 2000 jetta 2.0. In 5th gear im turning 2900 rpm is this normal?i find it high....
View 24 RepliesI've been having this problem for a few weeks now and its getting real bad. When I'm driving along at normal speeds my car will cut off on its own. Also when I'm slowing down the car will jump up 5-600 rpms and at utter and shake a lot and every other time it'll cut off. I've replaced the maf and nothings changed. I'm really hoping it doesn't have to do with the transmission. The car has 241k on it .
View 3 Replieslike the title said is it normal that my car idles at 875 rpm on idle
View 7 RepliesI have a 2004 VW Jetta 1.8T , what the normal coolant temperature should be?
View 1 Repliesyesterday my upper radiator hose connector broke off and I replaced it filled it up with coolant and now the upper radiator hose gets really hot at normal temps while the lower hose is cold maybe and gets warm not hot or anything... I see some steam coming off the radiator but i think its all the coolant that splashed on it yesterday from the hose busting off and flooding it basically. the car does not overheat at idle or driving or anything so I am curious to what it could be
View 4 RepliesI was sitting at a red light and the car shuttered and the rpms dropped but went back to idle. Then when the light turned green I released the clutch to start like normal and the rpms dropped and stalled. It cranks but won't start. I'm getting fuel to the fuel rail and I replaced the coil pack about a year ago.
View 2 RepliesI have an 03 GTI, and recently the engine has been very loud at speeds over 25mph. There isn't any rattling, ticking or chugging sounds. It just sounds like my rpm is at 7000, when it's actually 2000.
I'll try to upload a video tonight of driving around.
Ok, so I was driving normal highway speeds and all of a sudden, I realize a major drop in power. I pull over and restart it and it changes nothing. Now when I floor it, it takes 20-30 seconds to get to 90K.
I checked the air filter... Nothing. Used a code reader... Nothing. Then I decided to pressure test the cylinders... Nothing, except now the check engine light is on.
The Ol Dub is still drivable, but it is extremely slow and rough at idle. I am thinking it might be a MAF or fuel filter.
My vr6 some times loses its power but it's weird because the check engine light does not appear. It does for like 30 seconds then it goes back to driving normally.
View 1 RepliesGot a Vr6 a couple weeks ago and recently the gauge has been acting strange. Few days ago the gauge went from normal to showing completely empty and did that for a couple days (gauge would just display normal and occasionally just drop straight to empty and sit there until restart) but yesterday it started just sitting on full. Even when restarted just goes to full. I assume its the sender unit ....
View 2 Replies2001 2.0
251,xxx km
Noticed here lately that my brake pedal is depressing further, and can go to the floor if I press it hard enough.
If I press the pedal quick (panic stop) it engages quickly and in the correct spot (I can feel the front tires almost lock up) then it depresses more almost to the floor. the brakes still work perfect however.
What should I try first?
I use my hand brake, and have pumped the brakes and pulled the handbrake to set the rear pistons in place.
I replaced the two rear calipers about a year and a half ago and bled them obviously. Have not bled the front brakes and will do that, but was just looking for more insight, and common problems, vacuum leak, etc.
Reservoir is full as well, and no brake line leaks that I know of.
I'm having a weird issue with my passenger side turn signal light. It's more of an annoyance than an actual problem. When I turn on my headlights both yellow turn signal lights also usually turn on but the passenger side one is not turning on anymore. The odd thing is that it still blinks as normal when I engage the turn signal. I replaced the bulb but it did not resolve the issue. I'm thinking it's an electrical short somewhere. It's not the wiring in the headlight housing because I tried an old housing I kept when I replaced my headlights last year and I still had the same issue. What I should check first?
View 1 RepliesBackground facts:
Tranny swapped from my 4 speed auto to a 1.8t o2j 5spd
13lb. Light flywheel
Powerflex dogbone mounts
Peloquin LSD
The problem: Very hard to get a smooth shift from gear to gear. Trust me, I know how to drive, but I can always feel the car shifting into a different gear if you know what I'm saying. On my friend's bone stock Jetta, I just let the clutch out without gas in between shifts and you don't feel a thing.
On my car, you feel EVERYTHING. People have told me the light flywheel will make the ride more uncomfortable in many ways, especially since the RPMs drop much quicker in between shifts than stock.
2002 Hyundia Accent -- 1.6 DOHC 2D
When I get to 2700-2900 RPM Under load my car will chug out (basically lose power all together for a brief second) then it will come back and chug out again. I am able to max out RPM's while doing this however under load it still chugs along. WHEN not under load it rev's up fine and purr's like a kitten.
So I went and got a new motor for this car same model as was in the car before a 1.6 DOHC. However upon replacing it (also attached still was the timing belt and clutch assembly, never taken off)
So it seems to be getting spark just fine. and I replaced the MAP sensor thinking it was a intake issue however still problem exists when I am under load between 2700 - 2900 RPM it bogs out for a second losing all power.
I'm most likely picking up a 03 jetta glx vr6. Thing is the 6th gear is out. Is the entire transmission about to break or is it a common thing?
View 16 RepliesLLast night I was driving. I got off the highway and pulling on to the main road in 2nd, I ripped on it and went into 3rd quickly. It basically kicked it out of gear, and didn't seem like I had any other gear besides 1st or 2nd. Got to a local gas station in 2nd, and I originally thought my linkage had come off. While trying to back into a spot to make life easier, there was no reverse. seems like the trans is binding up. Aligned the linkage anyway, when the car is off, it goes into every gear, but when it is on, it feels like 1st-2nd-nothing. If I roll the car backwards and then forward, I have 1st. Other than that, it will not engage. If I put the trans in reverse and then try to back up, it feels like the trans is binding. Same with 1st, unless the car is running. Traction control light will not turn off either, will have it scanned this week to determine that issue...
Ive seen most people have issues with the 1st-2nd shift fork and have this causing the reverse issues.
2005 GLI 1.8t
The car was starting to have issues going into gear after a night of cruising. Then I was experiencing what I am thinking was clutch creep. The clutch would be down and in gear and the car wanted to slowly roll.
What I have done to try and fix it:
I have bled the system many times to get all the air out(i believe), and also readjusted the the linkage. NOW, the car will not go into gear when it is on but will when it is off. I have the car on stands at the moment and it will shift through all the gears when the car is on just the wheels spin since it is in the air.
The clutch/flywheel/pp/throw out bearing all have less then 2k miles on them. Tranny fluid has been replaced with Penzoil syncomesh. I have yet to ever do a hard launch.
Clutchmasters Fx400, OEM DMFW.
Car is an 02m trans w/o the black cap in the side so I cannot do the washer/gasket mod for clutch creep. Believe I have to order NLS shim kit and put behind the throw out bearing.
We added a 2011 Cor LE auto tranny to our 2005 LE.....like it a lot but for one issue. I didn't notice it test driving it (I was far more worried about the pedal locations and the electronic steering) but now I feel it a lot more.
Around 2900-3100rpm there is a buzzing feeling through the pedals/steering wheel. You notice it a lot more going up hills. The dealer noticed it too and is contacting "TAS" to see what they think.
What I'm wondering is if this is just a normal engine harmonic deal and it is what it is? I test drove other models (Civic,Focus,Elantra) and I didn't notice them having it.
Over the past couple weeks sometimes when i turn my car on it wont rev above 3100 rpm in any gear. The car is a 5-speed jetta 8v 2.0 and I'm just looking for any insight as to what is causing this problem. My check engine light is on and i had the codes read and there was a bunch, "catalyst system below threshold bank 1", " ignition coil A,B,C,D circuit primary/secondary malfunction", and "camshaft position sensor "A" circuit high input". I'm not sure if these codes are related to the problem but i had to have the whole top end of my engine rebuilt not even a year ago and all of the ignition coils and sparkplugs were replaced during that time.
This problem does not occur every time i turn the car on however, i did notice that sometimes when i go to turn the car on instead of the car starting in quickly, it will start hard after sever cranks and this is usually when i have this issue. it is very weird almost like there is a rev limiter on and i can usually fix the problem if i get up to highway speeds and downshift hard into 3rd and the car will shudder once or twice and will drive like normal again. What could be wrong i was thinking it might be a bad O2 sensor or a vacuum leak somewhere.
Just to clarify what i mean by it wont rev past 3100 rpm i mean that i can start from idle and accelerate normally and when it gets to 3100 rpm the power goes away and will just stay there even i put my foot all the way down. I can shift up and the same thing will happen i will accelerate normally but then once i reach 3100 rpm again it will stay there.
Have a 20th with the 02m six speed ... Car won't go into any gear, except reverse ... Tried with the car off or on, clutch in and out with no luck ...
I took off the linkage from the engine bay and can only manually get the car to go into reverse ... Feels like it can't change "levels" ... Don't think it's clutch since because the car won't engage a gear even with the car off ...
Tried searching and no luck ... Thinking shift forks but hoping not since don't want to drop the transmission and it could be something else ...
I bought my first vw about a month ago. It's a 2003 GTI 1.8t with what I THOUGHT had a 6 speed transmission in it when I bought it. I hate to admit it, but when I test drove it, I never had a chance to put it into 6th gear.
Anyways, I replaced the shift lever, and shift cable (bad Bushings on cable and you can't just buy the Bushings) because it was hard to get it onto 1st gear without pulling the boot up, and pushing that metal part down. (I don't know the actual part name). Anyways it shifts great now that I have the cables adjusted however it will not go into sixth no matter what I do.
This leads me to think that maybe someone put a 6 speed knob on a 5 speed lever. However, the wear on the knob is exactly the same as the wear on the steering wheel. The guy at the local dealership told me he sold me parts for a 5 speed shifter box and that the 6 speed linkage is completely different and I 100% have the 5 speed trans.