My gf's son has an old 2000 Jetta 2.0 and when the check engine light came on and shifted poorly, it was diagnosed as a problem with the transmission input and/or output sensors. Where are they located exactly?
Both look pretty much the same, but here's a pic of one of them : [URL] ....
A few years ago my auto transmission in my 3.5 L engine hyundai santa fe started shifting rough from 2nd to 3rd gear, i did a trans flush and changed the input output sensors, anyway last week it started again, so i just changed the input output sensors again, it did not fix the prob this time, do you think a flush would work.
View 4 RepliesI'm trying to get to the manual transmission input shaft seal on my 01 GTI w/12V VR6. I've removed the 3 bolts surrounding the input shaft but the metal shroud underneath the 3 bolts seems to be adhered tightly in place. You can see the 3 bolt holes and metal shroud in this photo: [URL]
Am I on the right track in trying to remove that shroud? If so, how do I loosen it?
I have a 2003 Jetta 2.0 with the drive by wire throttle and I've been having some problems with it lately.
When on the highway (at a constant speed) sometimes it's almost like you take your foot off the accelerator pedal, then when you go to press it more, nothing happens, until you pump it a few times, it works again. This sounds like an electrical problem to me, not fuel or spark, because it's not sputtering at all, it just ignores your accelerator input. Is the "throttle module" a serviceable part?
I have a 2007 jetta city with the single DIN radio (stock). I would like to have an aux input or usb input. I would like to know what would be the better option? (I don't want to go aftermarket). I know that there is a lot of option but I don't know witch one will work on my radio. (no pre-wired cd changer, no satellite).
Also, on the bottom right of the radio there is two kind of blank plugs (circle and rectangular). It looks like a usb and aux input would fit right there. I saw a picture in witch someone as the exact same radio but with a usb input (instead of the rectangular thing).
I just recently purchased my first mk4 golf 2.0 after having a mk3 jetta vr6 for two years. I've been having problems with the car shifting (automatic) i put a code reader on it and came up with p0722 output speed sensor which explains why it sometimes shifts at 4500. My two questions are where is the output speed sensor located? and what is a normal shifting range for properly running automatics?
View 2 Replieswhere is the Aux Audio Input? My owners manual is missing the booklet on the sound system, have no clue where this input is.
View 6 RepliesThis isnt my first vw but its my first vr6, its a 2000 gti glx, only showing codes for o2 sensors havent got a vag com yet only have a obd scanner. It idles fine and runs smooth until i get over quarter throttle then it starts hesitating like there isnt enough fuel or air...i know that the noob owner i bought it from cheaply put exhaust on it and i didnt see any o2 sensors but ive never known a car to not run correctly without them.
View 5 RepliesWhere is the aux input jack on the 2005 f150? I have the console button but no input jack?
View 2 RepliesMy Santa Fe indicated P0715 for input speed sensor problem. I purchased both sensors and based on forum input I removed the air box and battery to access senors. Output speed sensor is easy to see and access. I am having a problem locating the input sensor. I see wires going to a sensor under both the main wiring harness and shift cable. Is that the location of the input sensor? If so how do you move the wiring harness and shift cable to allow access? If not, where is the input speed sensor located? The Santa Fe is 2001 V6 2.7L.
View 8 RepliesWhere are they located?
View 7 RepliesI plan on changing the 2 sensors from the codes p0138 (bank 1, sensor2) and p2195 (bank 1, sensor 1). Any visual picture on here to locate these sensors?
2007 Xamry XLE V6
Looking for a diagram of the locations of the oxygen sensors on this vehicle, I am getting miss information from all around saying it has anywhere from 2-4 oxygen sensors and i think it has 3 am i right? two in the front behind the radiator on the exhaust manifold, and 1 somewhere by the catyaltic converter. There isn't a whole lot of manuals out there for these cars.4.0 ltr engine...
View 4 RepliesI have a 2004 vw toureg 3.2l v6 and i have two questions. first is where are the brake pad sensors located in the pad or outside of the break pad? Second question is TPMS light is on due to a dead battery in one of the tires how do i kill the whole system?
View 1 RepliesI dont see anything attached to the manifold....
View 10 RepliesMy 2005 F250 started stuttering, lurching, having wild swings in rpms, nearly dying at stop signs, no pickup when stepping on the gas, then taking off like a bat outta hell. After reading many, many posts here and on other sites, I have concluded that the most likely culprit is the ICP sensor, so I picked one up today (along with a EBP sensor - another story). It appears from the many posts that I have read that Ford/Navistar have frequently changed the location of these sensors. My question is: Where are the ICP and EBP sensors located on the 2005s (actual manufacture date is 07/2004)?
View 6 RepliesGolf 2.0 ... Finding the location of the AC Clutch/Compressor relay location. On the TDI its behind the the dash and I looked on mine and it doesn't seem to be the same. I've seen a thread where some said it was under the battery? Where it is and what number will be stamped on it. Another thread said it should be behind the dash and number 385 or 358, I looked and I don't have those numbers back there.
View 2 RepliesCan't find a solid answer. But where to put your fuse box after relocating your battery? Don't wanna just have it chillen there when I move the battery.
View 9 RepliesI want to clean up my bay a little bit. How and where can I relocate the power steering reservoir?
View 15 RepliesWhere the ambient temp sensor is located on my 02 Golf 2.0.
View 5 RepliesWhere is the fuel pressure regulator on a 2005 Jetta 2.0 BEV. It's nowhere on the fuel rail.
View 1 Replies