Golf IV / Jetta IV :: Grinding / Knocking When Turn And Occasionally Make Bong Sound When Reversing
Aug 17, 2015
My 2003 Jetta GLI was making a terrible grinding/knocking noise when i would turn and occasionally make this "Bong" sound especially when reversing. I took it to my local shop and they say my spring in the front left is "either broken or unattached" and that i need spings/struts. I have like 150k miles on this car so the timing is probably right. So my question is, how much should they charge for this? Also, what should i have them order and install? Im not trying to lower or anything like that, OEM or a slight upgrade is what im looking for....
View 9 Replies
Advertisement
I've had my R since late mid-summer, and one of the first things I noticed was this clunk sound when reversing into my parking spot and when making an aggressive sharp turn. Usually Left.
After reading multiple threads on this topic, I came to the conclusion that it was my sub-frame and the bolts need replacing. I got in a GB for the tyrol subframe stiffening kit after reading some good reviews/responses.
Today, on my day off, I finally went to a mechanic to get this installed. I just changed my mechanic, and this was my first visit to the guy hes had over 10 years experience at vw and just opened up his own shop. He did a great job, torqued the bolts to spec, made me drive around, do some pulls in 2nd and 3rd gear, reverse forward etc.
So hes about to pull the car back in to retorque and.... CLUNK...
Get in the car, reproduce the sound, get the car back up on the hoist... and at this point I'm expecting the worse. He takes my control arms off, checks the end links...
Brings the car down, and the clunking sound is louder than ever. It was the weathergaurd. When I turned on the wheel it was pulling it out and when I straightened the wheel it was popping it back into place, making a big clunk sound.
This was the exact sound that I was hearing, thinking it was my subframe. The bolts that came out were not stretched or bent out of shape like the ones you see in other reviews. They're actually in great shape. I'm glad I did the Tyrol kit and do not regret it, and I definitely feel a difference when I went into some aggressive turns.
View 9 Replies
So the Jetta developed a new noise lately that sounds just like what can be head on this video.
The spring-clicking kinda noise only happens when i make a sharp right turn at low speed and seems to be coming from the driver's side. So i though bad outer cv joint.
Well, I put on a brand new OEM unit last night and noise is still there.
View 1 Replies
So, I have a 2005 gti 1.8t, has 110k on it, just did a 3" straight pipe, and while a buddy and I were installing my new pipe, and straight pipe, he said my turbo seals were going bad. I could get the k04 cause it handles better, or get a rebuild kit. Well, today when I give it throttle, it almost makes a knocking sound from the turbo? Not from the front of the car, but at the end of straight pipe, you can hear it in that constant spool. What could this be? Time for the k04. Car has unitronic stage 2, so it gets ran hard sometimes.
View 21 Replies
1999.5 gls vr6 ... 113k on the clock
Timing chain hasn't been changed yet .. Has new spark plugs & wires ..
Water pump was replaced & pulleys look fine ..
No CEL .. Yes there's oil in it.
I get a knocking sound at idle and it has absolutely no rhyme or rhythm which makes me think it's not a valve or rod(wouldn't that make a constant noise?). The sound comes from the passenger side floor board. Only happens at idle, and if you rev the engine, it will go away. Even if you don't rev the engine some times it goes away then comes back. Sometimes I hear it when i pull up to a red light real loud & most of the time the engine purrs like a kitten. I even sat in the car and told my dad when it was making the knocking/ticking noise and he went all over the top and bottom end with a mechanical stethoscope & heard absolutely nothing. Am I missing something obvious?
View 1 Replies
I've got a 2003 Jetta with the 20v 1.8t, today I was driving along and when I slowed down coming into town, my car started making this sound that I can only describe as sounding like a tractor. It sounds like something is rattling under the valve cover.
Here's a video with the sound : [URL] ....
View 2 Replies
My 2000 Jetta GLS is producing a clunking/knocking sound from the front end (possibly left-front) ONLY while coasting and going straight. It mostly goes away if I turn left or right and totally goes away when I give the wheels engine power or when I brake.
I recently replaced my front-left control arm due to a thrashed rear bushing. I didn't replace the bearing as I didn't have a pickle fork. Not sure if this is related.
View 5 Replies
Quick q recently just got a gli and I've noticed a knocking sound when accelerating and shifting from stops could this be my motor mounts ? I was thinking my tranny or clutch but everything runs smooth and goes into gear fine...
View 1 Replies
There is a knocking sound in the rear passenger side area. Cannot diagnose the cause, what it could be. I checked the bushings for the anti sway Bar but that was not it.
View 1 Replies
When my truck is slowing down my manual transmission makes a knocking sound, but does not make the sound when accelerating. What could be the problem?
View 2 Replies
So its been about 2 months since this grinding sound started whenever Im going under 40km/h on my Mk IV Jetta.
Brake pads/rotors that is causing this or something else?
There is a metal/rubber friction smell when I park and get out of the car... It also drifts to the right a little and the alignment was done about 6months ago. I'm guessing its related to the rear breaks or I could be wrong?
View 2 Replies
My 01 Jetta 2.0 recently started making a grinding sound on start up! had the crank sensor and the starter changed about a month ago and everything was fine but yesterday, for absolutely no reason it would make a horrible grinding sound on start up.Not the typical one where the engine starts and 2 seconds later it screeches (I searched) but while the engine is turning over it grinds. Once it didn't turn over at all just grinding sound. It's not all the time tho either?
View 1 Replies
I'm having 4WD problems with my Yukon, but the dealer keeps telling me there's nothing wrong with it (this has been going on for 2 winters now), which is either code for, "let's wait until it's extended warranty expires, so we don't have to pay for it," or "the computer says nothing is wrong, so that's all we're going to look at." When it's in 4WD, anytime I make a sharp turn or even turn a corner there's a grinding noise in the front, if I try to back up, it will only go as far as one revolution of the tires then stop (I have to take it out of 4WD to backup), eventually the "Service 4WD" light comes on, but apparently nothing gets recorded on the computer. It has 32,000 miles on it.
View 6 Replies
So I noticed some grinding noises in my Mk IV VR6 the other day... checked my PS Reservoir and it was empty. Topped it up with some Pentosin, then 3 days later it was dry again. Looked underneath the car and the steering racks were drenched...
View 10 Replies
I recently had an issue with my transfer case that caused me to have to replace it with a rebuilt one. I did so and am now having a different issue. I have a switch on my dash that shows Auto, 4 High, and 4 Low. Whenever I shift that switch over to 4 High from Auto the light changes and I hear a click sound. When I shift the switch from 4 High to 4 Low I get nothing. So, I took off the transfer case motor and switched things over by hand. When I shift the transfer case (manually by hand) over to LOW setting on the transfer case; it seems to run ok as if it is in 4 low, BUT, when I shift the transfer case (manually by hand) over to HIGH setting I can shift into every gear but seemingly have no reverse. Reverse seems to make a whirring grinding sound.
View 2 Replies
The brakes on my 2007 Hyundai Elantra make a grinding sound (almost like finger nails on wood) when I have tried to stop in icy conditions. It's also hard to get the car to stop and I end up pumping the brake. A Hyundai dealer replaced the front brakes over a year ago and Adirondack tire replaced back brake pads in the summer. Is the noise part of the anti-lock feature or does it sound like a problem?
View 10 Replies
When maneuvering our LS forward or back, we hear a BONG sound as if you were plucking a violin. The Lexus dealer says it's due to the fact that the accelerator pedal is designed differently from previous versions. Why should we be satisfied with an LS460 that makes constant noises!!!
View 2 Replies
I have a 1996 Saturn SW2. When I turn hard left at a bit of speed (like about 20 mph), the left read end of my car makes a BOING sound... what could be causing this??
View 2 Replies
I have a 2012 L100 Saturn with just over 189K miles (yes, it's been an awesome car). In October 2012 I both sets of breaks replaced plus rotors. About 2 months after the service, I started hearing a knocking and grinding sound coming from the bottom of the car, about 80% of the time when I apply the breaks. The car does not make the sound if idle or while accelerating. The knocking seems to be loud at times and less present other times. The grinding sounds like a large wire cable is being pulled right underneath the car.
I took it back to the break place and they replaced the Master Cylinder under the warranty. The sound went away for about a month and then came back with about the same frequency. Took it back to the same place and this time they replaced the Wheel cylinder. Sound again went away, but this time came back 2 days later. I'm puzzled because for some reason the sound seems to go away and come back when the car is serviced. It;s also not consistent, but it's there. Not sure what it could be related to if not the break job. I'm bracing myself for some really bad news as this car has been a life saver since I bought it.
View 1 Replies
My 1997 Saturn SL2 has run so great until now. It has 150,500 miles on it. I drove home Tuesday, parked. Wednesday morning, it would not start. Would not turn over, or make any sound at all. We have determined it is not the battery or alternator, so we thought it was the starter. I got a starter and we installed it yesterday. Turned the key and still absolutely nothing. (same as before.) We've looked at all the fuses and they all look fine, but we switched some around of the same type and still no difference. The headlights, interior lights, radio, and everything work when I turn the key, just no crank. What else could it be? I'm so broke I can't tow it to a car parts place to have a diagnostic hooked up.
View 14 Replies
My car is a 2008 Nissan Altima 3.5L. It has an automatic cvt transmission. Here's the scenario: I turn my car on and shift into drive. I'll drive for maybe 10 feet and I will hear this strange sound that can only be described as a dull knocking followed by a dull scraping sound. The dull scraping sound will last for about 5 seconds. The sound appears to originate from behind the gas pedal, and I'm think I can feel the gas pedal vibrating very slightly as it is happening. The only condition that makes this sound happen is when I shift from park or reverse into drive. If I start my car and put it in drive it happens. If I'm at a red light go to park then drive, it happens. If I turn my car on, go in reverse, then drive, it happens. However it doesn't happen if I just stop and don't change the gear selector. It's been happening since I bought the car at 56k miles, I'm at 69k now. I haven't seen any decrease in performance, the car runs like a champ.
View 6 Replies
