Golf IV / Jetta IV :: Code P0785 - Car Sometimes Not Shift From 3rd To 4th Gear
Dec 20, 2013
When I'm driving, the Jetta will sometimes not shift from 3rd to 4th gear, so I just turn of the car a start it and it seems to work, but eventually does it again. Once it is in 3rd gear it does not downshift and stays in 3rd even when stopped. The trouble code is P0785 which is the shift/timing solenoid. Not sure if I need to get a new part or which solenoid to get. Also I cannot figure out where this solenoid is actually located or what it looks like.
View 1 Replies
Advertisement
Alright I might have made a major mistake and I need some input; I just recent bought a 2001 Jetta VR6 131k on it and at first I didn't notice so much but since I've gotten. To drive it more I've noticed it's really sluggish on take off and doesn't seem to shift into 4th gear. Also I started noticing a faint rattling noise. And the CEL is on with the codes P0785, P0411 and P1151.
View 1 Replies
So i was trying to adjust my freinds shift linkage on his o2j and i got a little ahead of myself and forgot to put the shift tower in the home position before making the adjustment. after i realized you can't shift into second ( either that or 2nd and 4th are extremely close together now and feel like the same gear ). I try to get it in home position even with the cables off ( did this for experimentation) and still wouldn't go into home position...meh. still have all the other gears including reverse .
View 4 Replies
Background facts:
Tranny swapped from my 4 speed auto to a 1.8t o2j 5spd
13lb. Light flywheel
Powerflex dogbone mounts
Peloquin LSD
The problem: Very hard to get a smooth shift from gear to gear. Trust me, I know how to drive, but I can always feel the car shifting into a different gear if you know what I'm saying. On my friend's bone stock Jetta, I just let the clutch out without gas in between shifts and you don't feel a thing.
On my car, you feel EVERYTHING. People have told me the light flywheel will make the ride more uncomfortable in many ways, especially since the RPMs drop much quicker in between shifts than stock.
View 9 Replies
Started noticing an issue with my trans awhile ago, the other day it stopped shifting out of first when cold. It's a 1.8T auto 5 speed tiptronic, it's the Jatco 09A. I know the shifting problem is the solenoids and it doesn't look that hard to swap them out. The trans shop said it looks like there is slippage on gears 2-4 and the fluid is toast. Looking at replacing or rebuilding, shop said 4-5 grand, how easy would it be to swap in a used trans? And what kind of issues would I be looking at?
View 1 Replies
I replaced the old auto trans that was slipping in my 2000 golf with a same year auto trans from a beetle. The beetle had 115k miles and the PO toasted the 1.8t. I replaced the TCM also and when I finished the install I took it out for a drive this afternoon and when I shift it into drive it starts out in 3rd. It will manually shift through the gears but it will not shift from 3rd to 4th. Could I have left something unhooked? Is this a solenoid issue?
View 10 Replies
My buddies Jetta won't shift into high gear. I am going to take a look at it this saturday to find more out.
View 4 Replies
Okay so I bought this car and a week later tranny wouldn't shift out of first when I would slow down or at least it would take a min. I would hit 4or 5 grand then it would jolt me back. It wouldn't do it every time though. I bought it to go to college drove it the 900 miles on the highway and had no problems except right before I left town but then fine. All I did was change the tranny fluid before I left which I can confidently say I don't think has been changed before that. stunk bad bud no metal.
Alright now I'll go jump in the car to go to class and it will not leave first. If I put it in the manual mode it thinks it's in third but clearly if in doing 15 mph at 4000 rpm that's not the case. It doesn't do it every time. Kinda hit or miss. After driving for a min it usually shifts. Sometimes I make it the two miles without it shifting though. Also sometimes It will shift but once I slow down it won't shift out of first again.
I have seen a code for torque management since I bought the car. The check engine light is on now but I haven't seen the torque code since I change the MassES. that's not to say it's not still there. I used a different handheld computer for the check engine light the last time I did it and I could have missed it because I was unfamiliar with it. I have put a mass airflow sensor, battery, alternator, and changed the tranny fluid since I have owned the car. drained 3L of tranny fluid and put 3L back in. Oh and the last time I checked the light it said lean in bank 1 but I was assuming that was an unrelated issue.
View 6 Replies
I have a 5 speed 01 wolfsburg. I was about to leave my driveway tonight and went to shift into 1st and the shifter was all loose. I could not shift into any gear, the shifter was just flopping around. Earlier in the day the neutral jiggle was much looser than it usually is, which I thought was peculiar.... So I guess that was it breaking.
Question is: how do I fix it? I looked under the hood and all of the linkage to the transmission looks good, I think it has disconnected/broken under the shift knob... I've looked around online and cant find anything for this year... or replacement parts for that matter.
I guess im going to have to get the car up on jacks and remove the heat shield to get to the bottom side?
View 5 Replies
Just bought this car yesterday. test drive went fine with no issues. Started driving it home and the check engine light came on ( no big deal i thought car runs great). I go to advance auto and their scanner won't hook up to it. So i start looking at the fuses and everything was good except it was missing the the number 7 fuse ( reverse lights/speedometer sensor), so i replaced the fuse. i get home and i decide to take it down the road one more time and it all went down hill quick. EPC light came on, the car wont shift out of first gear (automatic). so i let it sit over night with the number 7 fuse out and the battery disconnected. CEL never disappeared this morning and its do the same thing. It looks like the MAF was just replaced and the brake light switch looks like the newer green version. Im going to replace the brake light switch this afternoon and i already cleaned the MAF. Another thing that i noticed that is very strange is now the Foot symbol by the shifter has gone out. The one on the dash still is working properly but the one at the shifter does not light up at all now.
View 1 Replies
Have a question when I shift slow from 2nd to 3rd my o2j tranny doesn't grind but when I shift fast from 2nd to 3rd it grinds it happens starting at 3000 Rpms thru 6000 Rpms. It also doesn't happen when I shift from 4th to 3rd. Have performed a tranny fluid change. Along with replacing the clutch at 1500 miles ago. The engine is AWP.
View 4 Replies
Got a 2001 Jetta 2L automatic 200k miles with gremlins. possibly multiple unrelated problems. First problem that presented is that the transmission will occasionally not shift into 4th gear. I discovered that if I stop the engine, then restart it, it will again return to normal operation, hence the thought that it is electrical. After a year or so of this, second problem pops up: the engine will die while the car is driving, or some times idling at a light. I've also noticed that the interior lights flicker somewhat in intensity when on and the engine is operating, so there could definitely be a grounding issue somewhere. I have heard that the ECU/ECM connectors could become corroded, but haven't yet dug into it to look. Any guesses as to where to begin?
View 2 Replies
01 jetta vr6 5 speed. Alright so earlier today I pulled out the driveway. (Hard) was in 1st gear around 3 or 4 grand and I stomped it. Got to 6 grand and hit 2nd. Took 2nd to 6 grand and let of around 60 mph. After that I short shifted into 3rd, 4th, then 5th. I noticed going into fith was hard. Had kinda rev match to get it. I stayed in 5th till I got to my destination roughly 4 miles. When I came back out to leave I had a hell of a time getting it into reverse. On my way home it was extremely hard to shift and now when the car is running I cant get it into any gear. This is what I did.
Car shifts fine with car off.
Car will not shift with engine running.
When started in gear with clutch depressed I can still let the clutch out and stall the car.
When starting car while in gear with the clutch NOT DEPRESSED the car jumps forward.
I can figure it out ove tried re adjusting the linkage. Nothing.
View 6 Replies
First time owning a VW (Nissan guy but got love for the VW). So I am having 3 issues
1. This is the major issue. My battery is not charging. I have replaced both Alternator and Battery so i know the issue isnt there. I took it to an import shop (I can't diagnose electrical issues to save my life) they told me the positive terminal cable needs to be swapped out. Before I put down money for the part and swap it out I wanted to know if this sounds correct (or at least like a possible solution)
2. While driving the turn signal clicking sound will randomly come on from 5 seconds - 2 mins and then turn off. Some days its worse some days it's not.
3. I think this is a solenoid issue but maybe I am wrong. For about a week the car would not shift to the next gear unless RPM's hit 6k. I mean I would have to floor it to get the thing to shift to the next gear. It shifts down fine. I haven't had the issue in a few weeks but I would rather take care of it if possible.
These are all electrical issues and it would be awesome if they all were related but i'm honestly only concerned about the first one as I can deal with the annoyance of the second 2. This is my first VW and so far me and my family love it.
View 2 Replies
Damn car is stuck in 3rd gear! Hooked up scanner and the screen just says error! I have to keep the scanner in the vehicle, hooked up, just to drive the car. That's just so it'll shift as its supposed to! Now it's not letting me pull the code out, in order for me to erase it! It just keeps saying "error".
View 1 Replies
Scanned my APR chipped 2001 1.8T for a CEL and found the following codes.
17608 - Boost Pressure Control Valve (N249): Mechanical Malfunction
P1200 - 35-00 - -
17536 - Fuel Trim: Bank 1 (Mult): System too Lean
P1128 - 35-10 - - - Intermittent
16795 - Secondary Air Injection System: Incorrect Flow Detected
P0411 - 35-00 - -
-------------------------------------------------------------------------------
00943 - Heated Exterior Mirror: Driver Side (Z4)
35-00 - -
01358 - Internal Central Locking Switch: Driver Side (E150)
27-00 - Implausible Signal
I don't the think last two codes are related. I did a thorough search on Vortex and there doesn't seem to be any posts on this combo of codes, the first 3 that is. There are a few posts about the N249 and Fuel trim codes which may seem to be relate to vac leaks around the N249.
In terms of symptoms, I haven't noticed anything new. The car does seem sluggish on first and second and gear but it's been like that for months if not a year but no codes. I've had rough cold starts which has also been around for a very long time and I attributed this to the secondary air pump since the dealer found nothing wrong. The only real problem I've had for about a year is the car seems to have a global power loss at times where the entire cluster would start blink and beeping, usually after I use the power windows when the lights are on. All interior and exterior lights would also dim when this happens. Sometimes, the entire car would even shut off when I'm stopped. I've taken it to the dealer multiple times and no one has been able to figure it out. They think it's a look wire somewhere. Anyways, it comes and goes.
I do have an APR chip and it's been in for probably 8 years. So, basically no new symptoms really and all the codes are new. I've erased them and rescanned after driving and they all came back.
View 8 Replies
Just picked up a 2002 golf 2.0 auto for $200. Get the car home start it up and it runs great but... transmission shifts all kinds of funky. Starts in first then shifts to third. If I give it some gas it shifts down to second but has nothing there, just revs. Will not go into 4th at all. Throw my little mac scanner on it some codes come up. Only one that mattered was p0277 if I remember. Do a little search and it comes up as the g68 under the tranny mount. Change that out and had not cel. Still shifting the same but no code at all. Throw my scanner on just to see and get p0730 incorrect gear ratio.
View 2 Replies
I started my car the other day and found that it only drives the first gear and I can also put it in reverse. VCDS gave me a 00281 code saying no signal from Vehicle Speed Sensor G68. I replaced the sensor, but it still doesn't go into gear beyond 1st.
VCDS gives me the following codes after replacing G68.
2 Faults Found:
00652 - Gear Monitoring
27-10 - Implausible Signal - Intermittent
00281 - Vehicle Speed Sensor (G68)
03-00 - No Signal
I came across TSB 01-99-02 which says something about the codes being incorrect. It seemed a little vague about whether it is actually G38 or G22. I don't want to buy more sensors only to have it be something else. The speedometer and tach work fine so G22 doesn't seem likely to me.
The VCDS site says it could be several things including bad G68 or G38 sensor, low fluid & bad valve body. Was it the G38 sensor?
View 2 Replies
Bought a Mk4 1.8T gti last year had only about 75,000 on it and drove it for about 10,000 miles. The check engine light went on about 2 months ago and the code read 3rd gear incorrect ratio. It still rode fine until about a week ago when it started slipping. Brought it to the local transmission guys in my town and got a quote at about $3,000-$3,500 to have the transmission rebuilt. The transmission is a tiptronic automatic 6-speed.
View 1 Replies
I have 1 month left on my AAMCO rebuilt transmission. I took it in a few weeks ago when it went into "limp mode" (Stuck in 1st gear). Eventually, they got an error code of P0730, which I believe is electrical-related. All was pretty good but then today, driving @ high speed on the interstate, I could not get into 4th gear...
View 1 Replies
My 03 Jetta is having transmission trouble. It will shift from 1st to 2nd but wont shift to 3rd. It is an automatic 2.0.
View 10 Replies
