CDP ERROR 3. I have the OEM Premium CD player on my 2002 GTI and it is holding my CD hostage. What do I have to do to get the CD out, and once I do, will it continue doing this, or is it just some random malfunction? i want my CD back...
View 20 RepliesDamn car is stuck in 3rd gear! Hooked up scanner and the screen just says error! I have to keep the scanner in the vehicle, hooked up, just to drive the car. That's just so it'll shift as its supposed to! Now it's not letting me pull the code out, in order for me to erase it! It just keeps saying "error".
View 1 RepliesI have 1 month left on my AAMCO rebuilt transmission. I took it in a few weeks ago when it went into "limp mode" (Stuck in 1st gear). Eventually, they got an error code of P0730, which I believe is electrical-related. All was pretty good but then today, driving @ high speed on the interstate, I could not get into 4th gear...
View 1 RepliesSo I have a 2004 GTI with monsoon system and I use a tape adapter to play music from my iPhone. Most of the time when playing music if the cable hooked to iPhone moves at all, there is a loud scruffy feedback type noise coming from the speakers. I've tried a few different adapters so I know it's not that. What this annoying sound could be??
View 5 RepliesI am able to reproduce an error on my 2005's audio system. What "Error 4" means? I have to actually turn off the car to reset the CD player.
Here's how I reproduce it:
Background:It's a non-ML system
6-CD changer, cassette, AM/FM
I have six CD's loaded into the system
Steps:When listening to FM radio, push the CD button
Press the "Disk" up-arrow button rapidly (it is the radio station preset #4 button) to change disks. I usually cycle through five or six rapid disk changes, normally going from Disk 1 to Disk 6, in a fast manner.
Sure enough, after the fourth or fifth (maybe sixth) button press, "Error 4" flashes on the display. At this point, I can't do anything with the CD player. I can, however, switch to radio and listen as usual.
To reset the error message and to begin using the CD player again, I have to turn off the ignition. Turning off just the audio system doesn't reset the error.
Having Error 4 message from the CD player. I just had it today and my CDs won't play and I can't eject them. I have the Mark Levinson. Is it an easy fix?
View 10 RepliesI have an 03 F-150 XLT with the 6 disc changer, and I can't get the dang thing to eject. It plays most of the cds fine (sometimes it won't play a certain couple of the six that are in the changer, and reads "CD ERROR" after trying to play the disc for a moment) but it refuses to eject any of the discs. It pushes them out just a little bit and then errors. I've attempted to pull the disc out once its pushed itself out a little, but it won't release them.
I then have to mess with it for several minutes to get it to retake the disc and quit pushing it out again, and then a few more to quit erroring when I change it to disc. I've tried to disconnect the battery (I read in a forum that that sometimes works) but to no avail. I know its a frequent issue with these. I figure I can pull the stereo out and take it apart to get the discs, but how can I fix the issue for good?
The OEM DVD player in my '04 started having problems with occasionally displaying a disc format error across the screen. The movie usually still plays, but the lettering is stays on the screen. If you go back through the menus it will sometimes go away or you just have to eject and reload the DVD. Now it does it pretty much everytime we turn the player on.
View 8 RepliesMy 2010' camry has a compact disc "stuck" in it. The deck won't play it or eject it. How to get it out?
View 6 RepliesI have the basic radio and my 7 year old stuck an undersize round CD into the player which won't eject it, won't recognize it, and won't mount another regular disc. The dealer says that I need to send the whole player off to be repaired and that they have no tool to fuss with it for this - I know that undersize discs are a problem for the computer industry, sadly, my little guy jumped into the car and did this without my foreknowledge. We were preparing to leave the house.
View 20 RepliesI bought a 05 prius, the model has the upgraded audio package and came with a cassette player. First time we used it it worked fine, the second time we tried to rewind another cassette and it got stuck. The audio screen says audio off, i'm unable to do anything with any of the buttons and the CD player and cassette stays powered even when the car is off.
View 6 RepliesCD stuck inside the cd player and making noises, there is an error message when i select CD on the screen and sometimes it goes off (the CD icon on the screen).
View 1 RepliesSo driving on the highway my car died. It would crank but not start. Got it towed. This is what I have done to troubleshoot.
1. Swap ECUs. The car should start for a second and shut off because the car doesnt match with the ECU. Still just crank and no start.
2. Fuel pump still primes when I open the door. I also hear a weird air leaking noise when I reconnect the battery, but I think it comes from the fuel pressure regulator (which I think is normal).
3. Checked for current at the ecu wires, wasn't sure what to look for but it was getting numbers.
4. Battery had 12.1 volts running through it (Haynes said 12.5 but is that really much of a difference?
5. Checked spark plugs for spark. Pretty sure we did it right, but there was still no spark. We tried multiple times.
6. Scan car, get code P01314 twice (ECM error).
7. Try to clear codes, says Comm error.
Why am I not getting spark? and why is the ECU error occurring, because we tested with a new ecu, and there was still no start, not even for a second like there should be.
So finally got past the smog cert issue and a bad map sensor in the intercooler. However, during the smog test, I was informed I am getting low air pressure in the intake! What causes this? A bad MAF? a leak? I have replaced the EGR, and all rubber that connects hard pipes. The only piece not changed out during the rebuild is the plastic flex line from the airfilter box to the turbo intake.
View 2 RepliesI was having an issue with my car not going into boost so I plugged my code reader in and it had 2 codes 1 was p1200 n249 malfunction and the other was diverter valve malfunction so I did the quick easy one and got a new factory diverter valve but it still doesn't go into boost and still reads p1200 n249 what do I need to replace or should I do the n249 bypass it's a bone stock jetta 5 speed.
View 5 RepliesWhen checking my check engine light , I got P0021 a cam timing error, but my mk4 Gti runs perfectly ??
View 4 RepliesI keep getting the error code P0420. Cat below threshold.
I have replace both the front and rear O2 sensors and we reset the check engine light. While driving through the cycles to reset the sensors for them to be ready for DEQ, the check engine light came on again.
I am about ready to buy the Cat Converter, but it is really expensive and if there are any other things that I can try before replacing the Cat I would like to try that first. Any other issues associated with that code, or should I just replace the Cat Converter as my next step.
I have a mk4 jetta 2.0l with about 130,000 miles. The issue with my car is that is has a rough idle and dies out completely when I put the car in neutral. I currently have codes 16839- EVAP system leak detected, 16487- Mass air flow sensor, 17978 - Engine start blocked by immobilizer, and 16795 - secondary air injection system incorrect flow detected. The secondary air pump was taken off the car before i bought it, so i do not think that code is responsible. Also all of my spark plugs and wires are new. I think the issue is either with my maf sensor or with a vacuum line. I have tried cleaner my maf and also unplugging it, and the car still has problem. Unfortunately i do not know where all of my vacuum line are. I have only checked the two the go into the sensor on towards the firewall. The one has vacuum, but the one coming for the egr valve did have any vaccum even when i tried with my other line on it. Im not sure if this is the issue, and if it would cause my car to die.
View 6 RepliesI was cruising down the highway and my check engine light came on. I was a few minutes from a auto store and they said my code was p1296. I found out it is either the thermostat or the coolant temperature sensor. I wanna know where it is located in the engine bay. I have a 02 VW Jetta 1.8T.
View 1 RepliesI have a 2005 Jetta 1.8t and the thing will not start! The battery is fine, and has been recharged 100%. The fuel pump is pumping. It cranks all day, but just won't start. The only error code i'm getting is a P0411 which I understand is a leak in the vacuum system somewhere.
View 5 Replies2002 Jetta 1.8L Turbo running fine. Then one day driving on the freeway at about 70, I try to pass someone and notice when I push the gas the engine lulls. I back off the gas and accelerate slower and I can get up to speed. Drive it all the way home and its fine a t low speeds. Turn the car off and try to restart it and it wont start. Turns over but wont start. No CEL or anything else, I check the codes and I have a P0171 (Lean fuel Bank 1). Where do I start? Also car is parked in an underground garage. No chance of a tow out of this place, it may soon be a Jetta tomb.
View 2 Replies