Golf IV / Jetta IV :: Axle Makes Humming Noise When Stopping
Nov 7, 2015
So I just but my golf about a month ago and have hit many problems but the most annoying is the hum I get at 3500 rpms. In my searching I feel somewhat confident this is caused by a cheap right axle replacement. I also went under and found on the left axle markings that indicate its is oem VW and I was unable to find these on the right side. anyway I have found this: [URL]....
It says it is a hollow axle right there and it is 170 less than the cheapest oem one I have found. would this workout?
View 4 Replies
Advertisement
2005 jetta. On the highway when I hit about 75mph I hear this loud humming coming from either the engine or the exhaust, I'm not sure. It disappears immediately once I cross about 82mph. What could this be? Why such a specific range?
View 2 Replies
I have an 05 GLI and it makes noises when it's off. I don't know what it is. It's a 4 second hum then kicks off.I don't know if it's a pump of some sort or what. Today when I opened my car door for the first time of the day it did it. My **new** battery dies a lot. I've always thought that I've just left stuff on because I am a ding dong.
View 5 Replies
When stopping my 2004 VW GTI 1.8T at a low speed the brakes (sounds like from the front) make a strange noise from the front. The best way to describe the noise would like when you would put cardboard or the like in your bicycle tires as a child and make that whirring noise. I have checked the brake pads, rotors and the like and cannot find any evidence of grinding or anything of the sort. It only happens at low stopping speeds and not at harsher stops. There seems to be no evidence of problems stopping or anything like that, just an aggravating noise that will not go away! What it could be because I am completely lost on this topic and have checked all the basics (pads, calipers and rotors) for wear/tear and just did my brakes about 5 months ago with no noted issues at that point with everything broken down.
View 3 Replies
I have a 2003 ford escape (V6 Limited/Automatic) that just hit the 145,000 mile mark. With routine maintenance and minor repairs, I am hoping to make the car last at least 200,000 miles. I currently have an annoying, intermittent problem that I have not been able to solve on my own. The car has no performance issues, but when the vehicle come to a stop while in drive (at a red light, etc) the car make a low humming noise that is coming from the front of the vehicle. The noise stops once I get the vehicle back in motion or when I throw the car into neutral. The humming also changes when I turn the steering wheel, but I think that might have to do with the load on the engine changing. The only thought I have is the torque converter, but I am not sure how I would test or rule that out.
View 9 Replies
My 2004 Golf GTI VR6 6-speed manual makes a louder than usual decelerating noise while in 2nd, 3rd, and 4th gears. If I give it gas it doesn't make any noise but once I take my foot off the pedal it makes a louder than usual decelerating noise. It sounds almost as if something is maybe grinding but I'm not sure what it is. One mechanic said it may just need to be serviced (new transmission fluid). I've read some forums saying it may be the bearings or maybe need a new transmission. The car runs fine otherwise and there aren't any problems shifting up, it shifts really smooth. '
Its only when I downshift that I hear the noise. The noise is the same no matter if I'm turning or going straight and and it's in neutral, there ISN'T noise. It's only while in 4th, 3rd, or 2nd while decelerating. Even if this is a common problem with VW's how do I fix it?! The previous owner said it's been the same way since he's had it and it has NOT gotten worse and his mechanic said it was nothing detrimental to the car so he left it that way. The GTI has 130K miles on it and runs strong, that's the only problem it really has. I'm not sure when the transmission fluid was last changed so that could be a possibility. Going to possibly try that in a few days and see what happens.
View 6 Replies
I have an 03 2.0 jetta manual shifter. Never had issues before this morning. Got in car and sounded like it wanted to turn but wouldnt turn over. After a few attempts the turning sound stopped and I heard an electric pop. Now engine won't even try turning when I turn key it just clicks and engine makes a high pitch noise. Took starter and battery out got both tested and they are fine...
View 3 Replies
Recently had this problem which started up about a week ago where my car would make this clicking noise whenever I turn left while driving. When I turn to the right there is no noise. Some said that it could be that CV joints need to be replaced. I have a video showing the side that is making the sound, maybe there is something abnormal that I don't see.
[URL]
View 3 Replies
2005 Jetta. The car makes a loud deep humming noise once I hit about 75mph, and goes away once I get to about 82 or so. I've taken it out of gear and matched the rpm I get at those speeds, and I don't hear the noise at all. It's only when I'm in gear. What this could be?
View 4 Replies
Mk4 Golf City*, 2008, gas, manual, sunroof. Canadian budget-model.
Mysterious noise like WOMMMMM, WOMMMM itinerantly: Noise is only when air conditioning is on and the engine is warm. I can feel vibrations in the brake pedal. *You can't hear the noise under the hood*. It is quite loud in the cab, though, definitely coming from under the dashboard.
I have stuck my nose in. I removed the glove box and listened to the blower motor, it seemed to be coming from further toward the driver's side. It will be like wmmmmOMMMMM WOMMMMM pause WOMMMM like something is vibrating too close to something else and the friction causes it to go back to where it was.
I hit a speed bump going a bit fast. I broke the small cooling fan somehow so it was just loose hanging on its hub. I had that repaired but the noise hasn't gone away. It seems to be getting more frequent but so far there isn't any indication of the car suffering. This is the second summer it has made the noise.It haunts my sleep.
View 2 Replies
Car was overheating for a long time. Went to start it and wouldn't start. Its been sitting for a while so I replaced the battery and now when the battery is connected its making a loud humming noise. And still no start. It turns over and sounds like its trying to start just won't start.
View 3 Replies
2007 GS 350. In the past 6 months i have changed my FRONT brake pads with two different pair. First was a generic pad(REMOVED), and did some research then went for Akebono(CURRENTLY) brake pads 2-months noise-free and now back to braking noise dilemma.
Issues:
-In the morning, first 3-5 pressed brakes makes loud(REALLY LOUD!) humming noise then goes away. Feels like the brakes are rusty but it continually does it everyday. I just got the car serviced so assuming all my fluids are filled.
-Randomly, on a fully stopped brake i hear a whistle noise from the front brake. NOT as loud described above.
-I noticed the noise happened the most on HOT weather, and occasionally on COLD weather.
Longo Lexus advice me to buy an OEM brake pads and should resolve this problem. I'm also thinking of just getting it done at the dealership and pay that extra cash plus warranty.
View 8 Replies
My front axle is making a groaning like humming noise when the truck is cold and first starting to drive it. It does it when speeds are at 30 mph and under and goes away when putting it in 4WD. It sounds like the hubs but I'm not sure. The dealer hasn't been able to duplicate it because they haven't kept it overnight. I'm just wondering if this happen to the truck, was it fixed and what was the issue. Like I said, I think it may be a vacuum issue to the hubs, but not sure.
View 12 Replies
My Pruis v makes a humming noise. Sometimes. Doesn't happen all the time. Don't know when it will happen. When it does happen, the car makes a humming noise. High pitch and low pitch-no longer than 2 minutes. Seems to be coming from the right side of the vehicle. It is embarassing when we have friends in the car, the noise comes on , and the friend asks, 'what's that noise' and i shrug my shoulders-i don't know.Took it to service. Manager said he has to hear it to determine what/where it is coming from. If it isn't making the noise, he can't tell me where it is coming from. Took it back today and now we have a loaner so he can drive it for a couple of days to try to hear the noise.
View 7 Replies
We just brought home a new Tiguan 2012 Automatic and when we are in Drive (D) and going about 26-30 mph the transmission stays in a high gear (5th) and makes a vibrating hum.
It happens on a flat road when someone is in front of us and forces us to stay in the 26-30mph range.
It feels like it wont drop back to 4th at this speed and is overloaded in 5th. When we give it some gas it will hum and lag even more then finallly downshift.
Tiptronic and Sport seem fine but Drive does not feel normal in this range.
When we took back to dealer at 130 miles on the odometer, the tech sat in on the drive and experienced the symptom. His conclusion was that the car is in its "Adaptive Learning" phase and it should work itself out after about 600+ miles.
View 24 Replies
I thought that my front wheel bearing was bad but I removed it and it seems fine. The issue that I'm having is a continous vibration (noise) in the left front that gets worse with speed.The half shaft makes a noise at the point where the half shaft meets the steering knuckle and when I turn the shaft at the outer splines, the grinding noise is present. My question is, is the entire half shaft supposed to turn, even the outer diameter of it that would enter the steering knuckle, or is the shaft supposed to turn inside of that outer diameter? I hope I was able to explain my problem clearly/
View 6 Replies
I am in the process of replacing the front hub seals so my ESOF works again. I tested both front hubs with a mityvac and neither one of them holds any vacuum at all. All the lines are good, and the pump and solenoid seem to be working fine.
I have the driver's side apart and I have a couple of questions.
What's a good source for the vacuum seal? I've checked rockauto, riff raff, and diesel o-rings. Diesel o-rings has it, but the description says it's only for 2003+ Excursions so I didn't order it.
There is no yellow o-ring anywhere on the hub. I assume that someone forgot to put this o-ring back in and this is why I don't have ESOF? I guess what I really want to know is that there isn't some 2000-specific thing where there's no o-ring, right?
After I got the hub off, I spun it around on my workbench and it doesn't sound good at all. It makes a slight metallic grinding noise about 1/2 way around. I assume this isn't normal? AFAIK these are all original parts - but the missing o-ring means to me that someone already had it apart.
There was a lot of water intrusion and rusty colored grease but nothing was dry, the needle bearings were intact and the shaft isn't scored at all where the bearing rides. I'm hoping new seals and good cleaning and it should be good as new. And then it's off to the next side.
View 7 Replies
I go my R32 calipers powder coated, I rebuilt the err m and got 20th rears while I was at it.
I did make a noob mistake and pressed the brake pedal to try to manually bleed my rear brakes (used a vacuum pump prior) then I remembered my front calipers were off.I might have pressed it 3-4 times.I re-bled all 4 corners, once all 4 calipers were on, and did so until I was sure there was no air.I read in a few places that our rear calipers bleed because the bleeder screw isnt at the high point, which makes sense. So Im wondering if this is what I'm experiencing or is there something, via VAGCOM, I have over looked?
View 24 Replies
I recently bought a used 2003 jetta wagon with 159k. Is it normal to feel and hear a growling sound when the air cond is running and you stop for a red light. It's a 2.0 automatic jetta wagon. I never had a 4 cylinder automatic car and this is my first VW.
View 1 Replies
I have an 02 Jetta the the left CV Axle came loose from the tranny/axle flange. I checked the Bentley and it shows that a bolt holds the flange on, I guess a spline. My question when taking one off, is there anything inside that will drop/pop off when I pull it? The reason I need to take it off is that some of the bolts actually broke off, while others screwed their way out. Not sure why they came out or what made the others break but they did. It would be so much easier to get the broken bolts out with the flange out.
View 2 Replies
I am stuck in the process of replacing a driver side CV axle on a 2000 Jetta VR6 automatic. I followed a Youtube video that may have misguided me. I removed the ball joint connection to take out the axle. (I will need a alignment after all this.) I was able to take out the old cv axle, but unable to put the new one on. While taking out the old one, the strut sank 2 inches. I then disconnected the suspension from the braking system, so it would be lighter and easier to push the strut up. However, it will not budge upwards. Do I need to compress the spring? How to move the strut up?
View 14 Replies
