I was doing about 65 going up a 7% incline and all of a sudden no power from motor shifted down and kept trying tell 2nd gear and power hit and started accelerating again I know I have a p0420 has kicked on and off with the cluster but could that make this happen?! If not what can make my engine or other parts do this... 2.0 2003 Jetta....
View 4 RepliesI have a '01 1.8T Jetta with 132k miles that is driven to work daily. I don't take it about 4-5k rpms and don't drive hard in general. Nonetheless the motor still seems to be very hot after I drive it.
Well I always leave the engine running for at least 2 minutes prior to shutting it down. It's starting to get annoying but I am wondering if it's worth getting a turbo timer to continue practicing what I do (assuming it's even worthwhile).
So, just wondering what all the 1.8T folks do. Do you sit and let it run for a few mins and then shut down or do you recommend a Turbo timer?
I have 2003 Jetta GLI 24V VR6 original owner right from the showroom floor. Just the other day I was driving to work and all of the sudden the rpm's dropped the oil light came on (Beeping) and the car shuts off. I had just changed the oil several days ago and I know the oil level is correct and I check again and the oil level is correct.
So I started of very easy, like most blogs say "oil Sender"...replaced that and after driving for about 20 to 25 minutes...the same thing. So I also replace the oil pump and after driving 20 to 25 minutes the same thing.
No oil leaks. Oil pan is not cracked. So now I am at a loss. I have owned the car from day one and it is very well maintained.
I have a 2006 Rubicon Wrangler 4.0 (automatic) with 15K miles, excellent cond. When I drive up to the mountains my Jeep loses power to the point I have the gas pedal pushed to the floor, whereas I can jump out of the jeep and run along side of it. When I step on the gas on the freeway going at high speed it dogs down. It runs fine driving around town. I never had this problem before. I don't think its a transmission problem because I have no engine light coming on. I just checked the Catalytic Converter and that's ok. I'm lost, I have no clue what it can be.
View 1 RepliesFuel mileage is terrible also but the truck really has no power. Running down the highway it kicks down just to pull a small incline. Check engine light is not on and there is no hessitation. The truck has 105k on it and i have put only 5k of those miles on. I did pull a couple plugs and they are autolites so plugs must have been changed at some point. Does this sound like a coil problem?
View 5 RepliesI have a VW 2003 VR6 jetta and lately I need to turn my key 2-3 times to start the car. Then while driving during daytime hours its stalls after 30 - 40mins. With EPC light on. I also have an engine light on.
Code P1151. I noticed a small exhaust noise coming from my middle pipe and my engine is very hot after driving for 30 -45 mins after it stalls. It does start back up after 10 minutes but stalls later.
Just as I was talking up my 03 jetta with 250,000 miles to a buddy, it developed a problem. It started to take a while to start, and wouldn't rev over 3000 while driving. (like all the other posts, would just die at 3k). So, I installed new Crank and Cam position sensors. Started up...a little stumble...running. Take it for a drive and able to rev over 3k rpm. Now it just spits, sputters, dies, stumbles.....push in clutch, engine dies....???? I know i will have to probably take it to VW for them to check it out....
View 6 RepliesI have an issue that I have yet to figure out. While the car is in motion there is a rumble from what sounds like the front driver side. I've replaced the wheel bearing and CV axle already. The noise seems to have gotten better but its still there. The noise will worsen when turning left and pretty much disappear when turning right.
View 2 RepliesHere is my new to me 03 Jetta 1.8T Wagon. This all started yesterday driving down the highway at about 65, I drove over a bump and there was what felt like a jerk. I lost the radio right away and when stepping on the accelerator it didn't seem to go over 3500rpm. I got a few miles into town taking it easy and it died as I pulled up to a stop sign. I was able to get a jump and get it running again.
This was the first jump of the day...When we popped the hood to jump it I noticed that the red wire coming off the positive battery terminal to the power block was frayed and corroded, so I cut the bad end off and stripped the wire to get a good connection. Left the car on a battery tender just to make sure the battery was charged and came back after a few hours and it started right up. Problem solved right?! Wrong...
Probably 10 miles down the road the same thing happens, a jerk or clunk sound, lost power and the call stalled out. Called family that was close by and tried to jump it again 'cause that worked the first time... Got a few miles down the road and it happened again!
Here's a picture of the gauge cluster and all the lights that lit up.
Long story short the car had basically no lights, power, for the windows/radio/turn signals/headlights etc... but was putting along at about 5 mph. I was out in the country and about 5 miles from home so I was just focused on getting it in my garage. It died again and a jump wouldn't even get it going the next time. I did some reading on my phone and it seems like the power block can be problematic, I took a picture of that because there is some obvious melted plastic on the large black wire.
I have a friend with a vag com, and he was able to come out and read the faults and then clear them and the car started right up just fine off a jump pack. We did get it home, but today I'm getting the same issues. I am trying to trace that black wire to its origin to see if there is corrosion or a loose connection there but I have no clue where else to start....
I start a new job on the 21st of July and this was meant to be my commuter as my truck gets terrible mileage...
OK so here's the deal. Driving around town @ lower speeds I've yet to have this problem. When driving at freeway speeds seems like between 1/4 tank & reserve all of a sudden the power just drops off . I mean like the ignition has been turned off. No throttle response .. nothing..... just begins coasting & dropping speed. When throttle is depressed... totally dead. This lasts for about 5-10 seconds then after coasting & looking where to pull off the highway all of a sudden the engine kicks back in like nothing ever happened. Where to look for Jetta MK 4 18T Fuel supply problem??
View 4 RepliesI want to start by saying I'm new and don't really fully know how to search vortex, I'm sure there's probably a bunch of things about this. I have an 04.5 gli, my temp gauge reads 190 all of the time but according to vag com I'm running at about 220 some times higher. I've heard my fan kick in once in the year I've owned it. Also I get a decent amount of power loss after driving for about 20 to 30 minutes. Idk if that's related, but just hard wire the fan with a switch? I don't have a lot of money so I'm not really trying to play a guessing game replacing stuff.
View 6 RepliesOk, so I was driving normal highway speeds and all of a sudden, I realize a major drop in power. I pull over and restart it and it changes nothing. Now when I floor it, it takes 20-30 seconds to get to 90K.
I checked the air filter... Nothing. Used a code reader... Nothing. Then I decided to pressure test the cylinders... Nothing, except now the check engine light is on.
The Ol Dub is still drivable, but it is extremely slow and rough at idle. I am thinking it might be a MAF or fuel filter.
My vr6 some times loses its power but it's weird because the check engine light does not appear. It does for like 30 seconds then it goes back to driving normally.
View 1 RepliesI've been experiencing power loss at random times while driving, idling, With almost always flickering headlights on my mkiv 1.8t gti. Also on what always seems like the exact same spot on the freeway I'm losing all power to the wheels and it feels as if my plugs aren't firing for about 10 seconds Which causes me to bog down. At which point I down shift and play the throttle until my motor then begins running normally again.
I've semi recently replaced my battery and terminals, due to corroded terminals and worn out battery. Is is possible a ecu reset could solve this problem?
Also when the power surges during driving my traction control and hand-brake lights on the tachometer will flash and the car will beep three or four times (same as when the hand-brake on beep).
Well I have been working on my build for about 2 1/2 years. Built the motor for the turbo set up that I had on the car and a few other goodies.
Now the motor turns over with no issue and I have spark. So I know my problem lies in the fuel delivery. My pump tested fine and I have fuel at the rail. So my next guess is the injectors. After trying to start the car I pulled 2 spark plugs out and they where dry. So this proved to me there's an issue here.
Before I go and rip my manifold off and start pulling injectors is there anything I could check first? I'm thinking from sitting that have gotten dirty and clogged.
Looking for wire diagram for the injectors on the vr6?
I have a 2001 Golf with a 2.0L motor. I've had this issue for a while now; the motor burns oil at an unreasonable rate - around a quart every 1200 miles. If I'm at a long traffic light and idling, a lot of white smoke will come out the back when I start moving. I don't notice smoke any other time. Also, the gas mileage is reduced by about 75 miles per tank when it's cold outside.
I have recently replaced:
temperature sensor
thermostat
plugs & wires
cleaned mass airflow sensor
The last mechanic I went to, who I will no longer be using, as he is incompetent, thought the cause for the lost cold weather mileage and burning oil is the PCV valve. A friend thought it would be a worn head gasket. I'm having trouble finding any info on PCV valves for this motor.
My car has been leaking coolant as soon as you put it in from it looks like the transmission area. Today I filled the car with water and drove it on the interstate to work. The car started getting jerky like it was losing power. So I pulled over and when I did the car shut off. There was excessive smoke under the hood and after removing the oil cap, smoke coming from there also. Tried restarting and it sounds like it just spins. No start. Looked at the timing belt, it's still intact. Put a wrench on the crank pulley and it's turning. What's wrong? Is it a goner?
View 10 RepliesMy 1.8t motor is still ticking around 2500-3500rpm. I have changed the oil with 5w-40 mobil1 no even 75 miles on oil change, Brand new oil pump with tensioner and chain. oil pick up tube cleaned and good. new plugs about 75 miles on them as well. Always ran 93 octane (highest I can get at my gas station) Only thing left that I can think of is my cam tensioner is bad.
When I accelerate up to speed it starts ticking but as soon as I let off the throttle it will stop get back on the gas it starts again.
Stockish 2000 gti 1.8t 5 speed. short ram intake.
Is there a way to tell if the cam tensioner is bad? .
Okay just installed a newer 24v into my existing 24v VR6 GTI both with 135k. I have heard the motor run before it was pulled and sold to which sounded fine. Upon receiving the motor I put new timing chains, guides, headgasket and new gaskets all around. The timing was right on the mark and I tightened everything up to torque spec and I'm getting this noise which sounds like it's from the timing cover area. A code just popped on which I'm going to scan as soon as I get my hands on one. The car was running great for about 20 minute and I shut it off then turned it back on about 5 minutes later and experiencing these scary noises. I tried pulling each individual coil with no results to get the noise away. What could this be?
[URL] .....
I got a new resistor since my last one was in a puddle of water and installed that today and still have no heater blower motor. I checked all the fuses and have power. I sent power to the blower itself and it spins good. So somewhere between the fuse and the blower it isn't working. I need to take the controls out and test for power there. Didn't have time to do that today. What wires to check or where to start trouble shooting?
View 7 RepliesBlower motor has stopped working on my 2008 jetta 2.0. Motor works fine and I have traced the issue back to the fan switch connector which is not getting power. Seems like it should be a fuse issue, but they all seem to check out fine. Not sure where else to look. Is there a relay upstream that could be bad? I have owned since new and it has never been apart.
View 3 Replies