Golf IV / Jetta IV :: 2003 - CEL / EPC Light Came On - Won't Shift Out Of 1st Gear?
Feb 10, 2015
Just bought this car yesterday. test drive went fine with no issues. Started driving it home and the check engine light came on ( no big deal i thought car runs great). I go to advance auto and their scanner won't hook up to it. So i start looking at the fuses and everything was good except it was missing the the number 7 fuse ( reverse lights/speedometer sensor), so i replaced the fuse. i get home and i decide to take it down the road one more time and it all went down hill quick. EPC light came on, the car wont shift out of first gear (automatic). so i let it sit over night with the number 7 fuse out and the battery disconnected. CEL never disappeared this morning and its do the same thing. It looks like the MAF was just replaced and the brake light switch looks like the newer green version. Im going to replace the brake light switch this afternoon and i already cleaned the MAF. Another thing that i noticed that is very strange is now the Foot symbol by the shifter has gone out. The one on the dash still is working properly but the one at the shifter does not light up at all now.
View 1 Replies
Advertisement
So i was trying to adjust my freinds shift linkage on his o2j and i got a little ahead of myself and forgot to put the shift tower in the home position before making the adjustment. after i realized you can't shift into second ( either that or 2nd and 4th are extremely close together now and feel like the same gear ). I try to get it in home position even with the cables off ( did this for experimentation) and still wouldn't go into home position...meh. still have all the other gears including reverse .
View 4 Replies
Background facts:
Tranny swapped from my 4 speed auto to a 1.8t o2j 5spd
13lb. Light flywheel
Powerflex dogbone mounts
Peloquin LSD
The problem: Very hard to get a smooth shift from gear to gear. Trust me, I know how to drive, but I can always feel the car shifting into a different gear if you know what I'm saying. On my friend's bone stock Jetta, I just let the clutch out without gas in between shifts and you don't feel a thing.
On my car, you feel EVERYTHING. People have told me the light flywheel will make the ride more uncomfortable in many ways, especially since the RPMs drop much quicker in between shifts than stock.
View 9 Replies
Started noticing an issue with my trans awhile ago, the other day it stopped shifting out of first when cold. It's a 1.8T auto 5 speed tiptronic, it's the Jatco 09A. I know the shifting problem is the solenoids and it doesn't look that hard to swap them out. The trans shop said it looks like there is slippage on gears 2-4 and the fluid is toast. Looking at replacing or rebuilding, shop said 4-5 grand, how easy would it be to swap in a used trans? And what kind of issues would I be looking at?
View 1 Replies
I replaced the old auto trans that was slipping in my 2000 golf with a same year auto trans from a beetle. The beetle had 115k miles and the PO toasted the 1.8t. I replaced the TCM also and when I finished the install I took it out for a drive this afternoon and when I shift it into drive it starts out in 3rd. It will manually shift through the gears but it will not shift from 3rd to 4th. Could I have left something unhooked? Is this a solenoid issue?
View 10 Replies
My 03 Jetta is having transmission trouble. It will shift from 1st to 2nd but wont shift to 3rd. It is an automatic 2.0.
View 10 Replies
My buddies Jetta won't shift into high gear. I am going to take a look at it this saturday to find more out.
View 4 Replies
When I'm driving, the Jetta will sometimes not shift from 3rd to 4th gear, so I just turn of the car a start it and it seems to work, but eventually does it again. Once it is in 3rd gear it does not downshift and stays in 3rd even when stopped. The trouble code is P0785 which is the shift/timing solenoid. Not sure if I need to get a new part or which solenoid to get. Also I cannot figure out where this solenoid is actually located or what it looks like.
View 1 Replies
Okay so I bought this car and a week later tranny wouldn't shift out of first when I would slow down or at least it would take a min. I would hit 4or 5 grand then it would jolt me back. It wouldn't do it every time though. I bought it to go to college drove it the 900 miles on the highway and had no problems except right before I left town but then fine. All I did was change the tranny fluid before I left which I can confidently say I don't think has been changed before that. stunk bad bud no metal.
Alright now I'll go jump in the car to go to class and it will not leave first. If I put it in the manual mode it thinks it's in third but clearly if in doing 15 mph at 4000 rpm that's not the case. It doesn't do it every time. Kinda hit or miss. After driving for a min it usually shifts. Sometimes I make it the two miles without it shifting though. Also sometimes It will shift but once I slow down it won't shift out of first again.
I have seen a code for torque management since I bought the car. The check engine light is on now but I haven't seen the torque code since I change the MassES. that's not to say it's not still there. I used a different handheld computer for the check engine light the last time I did it and I could have missed it because I was unfamiliar with it. I have put a mass airflow sensor, battery, alternator, and changed the tranny fluid since I have owned the car. drained 3L of tranny fluid and put 3L back in. Oh and the last time I checked the light it said lean in bank 1 but I was assuming that was an unrelated issue.
View 6 Replies
I have a 5 speed 01 wolfsburg. I was about to leave my driveway tonight and went to shift into 1st and the shifter was all loose. I could not shift into any gear, the shifter was just flopping around. Earlier in the day the neutral jiggle was much looser than it usually is, which I thought was peculiar.... So I guess that was it breaking.
Question is: how do I fix it? I looked under the hood and all of the linkage to the transmission looks good, I think it has disconnected/broken under the shift knob... I've looked around online and cant find anything for this year... or replacement parts for that matter.
I guess im going to have to get the car up on jacks and remove the heat shield to get to the bottom side?
View 5 Replies
Have a question when I shift slow from 2nd to 3rd my o2j tranny doesn't grind but when I shift fast from 2nd to 3rd it grinds it happens starting at 3000 Rpms thru 6000 Rpms. It also doesn't happen when I shift from 4th to 3rd. Have performed a tranny fluid change. Along with replacing the clutch at 1500 miles ago. The engine is AWP.
View 4 Replies
Got a 2001 Jetta 2L automatic 200k miles with gremlins. possibly multiple unrelated problems. First problem that presented is that the transmission will occasionally not shift into 4th gear. I discovered that if I stop the engine, then restart it, it will again return to normal operation, hence the thought that it is electrical. After a year or so of this, second problem pops up: the engine will die while the car is driving, or some times idling at a light. I've also noticed that the interior lights flicker somewhat in intensity when on and the engine is operating, so there could definitely be a grounding issue somewhere. I have heard that the ECU/ECM connectors could become corroded, but haven't yet dug into it to look. Any guesses as to where to begin?
View 2 Replies
01 jetta vr6 5 speed. Alright so earlier today I pulled out the driveway. (Hard) was in 1st gear around 3 or 4 grand and I stomped it. Got to 6 grand and hit 2nd. Took 2nd to 6 grand and let of around 60 mph. After that I short shifted into 3rd, 4th, then 5th. I noticed going into fith was hard. Had kinda rev match to get it. I stayed in 5th till I got to my destination roughly 4 miles. When I came back out to leave I had a hell of a time getting it into reverse. On my way home it was extremely hard to shift and now when the car is running I cant get it into any gear. This is what I did.
Car shifts fine with car off.
Car will not shift with engine running.
When started in gear with clutch depressed I can still let the clutch out and stall the car.
When starting car while in gear with the clutch NOT DEPRESSED the car jumps forward.
I can figure it out ove tried re adjusting the linkage. Nothing.
View 6 Replies
First time owning a VW (Nissan guy but got love for the VW). So I am having 3 issues
1. This is the major issue. My battery is not charging. I have replaced both Alternator and Battery so i know the issue isnt there. I took it to an import shop (I can't diagnose electrical issues to save my life) they told me the positive terminal cable needs to be swapped out. Before I put down money for the part and swap it out I wanted to know if this sounds correct (or at least like a possible solution)
2. While driving the turn signal clicking sound will randomly come on from 5 seconds - 2 mins and then turn off. Some days its worse some days it's not.
3. I think this is a solenoid issue but maybe I am wrong. For about a week the car would not shift to the next gear unless RPM's hit 6k. I mean I would have to floor it to get the thing to shift to the next gear. It shifts down fine. I haven't had the issue in a few weeks but I would rather take care of it if possible.
These are all electrical issues and it would be awesome if they all were related but i'm honestly only concerned about the first one as I can deal with the annoyance of the second 2. This is my first VW and so far me and my family love it.
View 2 Replies
I just recently bought a 03 Jetta and it doesn't shift until it is warmed up, once warmed up it runs great. I was told it needed a transmission change but when taking it to Aamco they said it needed a valve body. I read that it could be the solenoids that are causing the issue. Should I replace the whole valve body or just the solenoids? What is the main components in the valve body?
View 2 Replies
My 03 Gli 24v manual transmission has been acting up lately. First it started to get a little difficult to shift into gears about a week ago. Then tonight i was driving through a parking lot in 2nd, and after i came to a stop i tried to put it back in to first and it would not go into gear. As i was trying to get it into 1st i could tell it was grabbing a little bit and the car was inching forward.
I got it to a parking spot and starting reading about other peoples issues, one i read said they were able to get it to move after pumping the clutch some. After trying that i was able to get it into gear and drive it to my parents. Looked at my brake fluid and its full. Took it for a test drive around the neighborhood and it was shifting fine at first then started getting a little difficult to shift again. I tried taking off in 6th and it stalled. I tried going from 1st around 3k-4k rmps to 6th and it was still driving with very little lugging. My clutch feels and is still stiff, not loose at all. I do have to go all the way to the floor with the clutch before im able to shift
Finally to my questions. Could my clutch be going bad? Could my cables need adjusting? Something I read about a pressure plate maybe?
View 5 Replies
I bought a 2003 Jetta automatic w/ triptronic.
When the engine is cold in the morning(when i go to work) engine light(CEL) comes on and the car remains stuck in 2nd shift for 5-10 min(happens 1-2 times a week).
When I get back from work car goes well and the CEL is off.
I went to a shop and I found 4 codes:
00300- transmission fluid temperature sensor(G93). not a plausible signal-intermittent
00526- brake light switch- F short with power-intermittent
00652- gear monitoring not a plausible signal- intermittent
01045-tiptronic switch (F189) not a plausible signal- intermittent
I was thinking that it's possibly a transmission control module gone bad, but I'm not sure.
View 4 Replies
I'm finishing up the install of my sequential shift light and I integrated it into the oem gauge cluster. [IMG][/IMG]
View 3 Replies
Car specs:
- 2003 VW GTI VR6 24v
- 100,000 miles
- Clutch replaced at about 80,000 miles
A few weeks ago, I noticed a very slight noise coming from my shift boot. The noise wasn't a grinding or clanking noise; it was more of a noise that sounded like keys jingling or coins rattling (the best description I could come up with).
Anyways, it would only occur on acceleration. When the car is in neutral or shifting between gears, there is no noise. It lasts generally for about 3-5 miles, and then goes away. I haven't had any change or problems in shifting.
Not sure if something is loose in my boot, or if the linkage may be off, or if I should maybe change out the gear oil (since the noise goes away after the car is warmed up).
View 8 Replies
A few days ago I changed the transmission fluid in my 03 jetta with an 02J. After this it felt nice for a day or two, but then it became very hard, and sometimes impossible to select 3rd and 5th gear. The other gears feel a little funny as well, but they are working fine. I used OEM VW/Audi fluid from German auto parts, and when I used the same stuff in my old GTI, it was great. Maybe a motor/trans mount got loose and its messing with the shifter cables? I really don't know what it can be, but it is very frustrating as this is my daily driver, and I am starting college on Tuesday, so I just need my car to work properly without a lot of downtime at this point.
View 4 Replies
2003, Jetta 1.8t, 5 speed, 76,500 miles ... The other day I was driving and all of a sudden I had a hesitation in 3rd gear. I have relized since that this hesitation occurs in 3rd 4th and 5th gear, but not 1st or 2nd. I am going to change the spark plugs tomorrow in hope to fix this problem. The hesitation occurs whenever you get into the gas and begin to accelerate(typically around 3000RPM and up). There are no dash lights on at all and the cars is running fine besides the hesitation.
View 2 Replies
