Golf IV / Jetta IV :: 2001 - Shifter Won't Shift The Transmission All The Way?
Jun 10, 2015
I have an 01 Jetta, 2.0L, 5 Speed manual transmission.
The issue seems to be that the shifter wont shift the transmission "all the way" into 1st, 3rd, and 5th gear. When I shift into the gears that are forward on the shifter, it will go into gear, but then the shifter (in the car) moves back toward neutral a little. I can drive in 1st no problem, but in 3rd and 5th some weird stuff happens...
While driving, when I shift from second to third I have to keep my hand on the shifter otherwise I get kicked out of gear. Also, when I drive on the highway, I periodically get kicked out of 5th gear if I don't keep my hand on the shifter (usually, when I let off the gas).
Anyway, being that I've fixed many problems on many cars by searching forums and google, I spent the last few days trying to figure out the problem by looking through the forums, but I have yet to find a solution. I tried adjusting the shift linkage using the method described in the dieselgeek video on youtube [URL] ...., but it didn't work. I'm pretty certain it's not the shifter bushings because i have almost no play in the shifter in neutral.
I had someone cycle through the gears while I watched under the hood, and its clear that the cable that controls the forward and back part of the shifting is not pulling back far enough on the counterweight on the transmission. (When shifting into 1st, 3rd, and 5th.) When the shifter puts the tranny into these gears I can still move the counterweight on the tranny further than the shifter will pull in in the same direction.I tried adjusting the linkage to compensate for this, but the cable is as far into the cable end as it will go...
View 3 Replies
Advertisement
Got a 2001 Jetta 2L automatic 200k miles with gremlins. possibly multiple unrelated problems. First problem that presented is that the transmission will occasionally not shift into 4th gear. I discovered that if I stop the engine, then restart it, it will again return to normal operation, hence the thought that it is electrical. After a year or so of this, second problem pops up: the engine will die while the car is driving, or some times idling at a light. I've also noticed that the interior lights flicker somewhat in intensity when on and the engine is operating, so there could definitely be a grounding issue somewhere. I have heard that the ECU/ECM connectors could become corroded, but haven't yet dug into it to look. Any guesses as to where to begin?
View 2 Replies
I have a 5 speed 01 wolfsburg. I was about to leave my driveway tonight and went to shift into 1st and the shifter was all loose. I could not shift into any gear, the shifter was just flopping around. Earlier in the day the neutral jiggle was much looser than it usually is, which I thought was peculiar.... So I guess that was it breaking.
Question is: how do I fix it? I looked under the hood and all of the linkage to the transmission looks good, I think it has disconnected/broken under the shift knob... I've looked around online and cant find anything for this year... or replacement parts for that matter.
I guess im going to have to get the car up on jacks and remove the heat shield to get to the bottom side?
View 5 Replies
So I just got 42dd shifter bushings and im having some issues!
Installation was no problem but once you complete the install you are supposed to re-adjust the linkage. First you have to lock the shifter in place, both in the cabin and in the engine bay (as shown in this Diesel Geek video: [URL] .... )
The only trouble I'm having is that i cannot locate the locking pin as shown in this integrated engineering picture: [URL] .....
View 3 Replies
When going to adjust my DG shifter since it wouldn't go into first I noticed that my L-shaped lever (02J-301-358C) on the tranny was more out then usually and could be pulled straight out with no resistance. I am guessing the piece at the end is also broken and will need to be pulled out, but how will I put the transmission into home mode after?
View 8 Replies
My 03 Jetta is having transmission trouble. It will shift from 1st to 2nd but wont shift to 3rd. It is an automatic 2.0.
View 10 Replies
Have a question when I shift slow from 2nd to 3rd my o2j tranny doesn't grind but when I shift fast from 2nd to 3rd it grinds it happens starting at 3000 Rpms thru 6000 Rpms. It also doesn't happen when I shift from 4th to 3rd. Have performed a tranny fluid change. Along with replacing the clutch at 1500 miles ago. The engine is AWP.
View 4 Replies
I have an 04 jetty with an auto Transmission. It doesn't seem to shift after the first time when speeding up. What might cause this?
View 5 Replies
Bought a 2003 golf gti 1.8t as kind of a project. Car had no interior no exhaust and some shifting issues. To fix the shifting issues rather than replacing solenoids I just got a rebuilt valve body. After installation the car still doesn't shift from 1st to second properly and now I don't have reverse. (It's an 09a transmission)
View 1 Replies
I have an 01 gti vr6 5speed... All of the sudden, i cant get the car to shift into 2nd and 4th and neutral still sits in the middle, but way back, almost where 4th should be. It seems like everything is out of alignment somehow. I parked the car, went into the store, came out of the store and drive away and the problem started. Just like that, no warning.
View 3 Replies
I have a 2001 Jetta 1.8t. O2j trans obviously. It shifts not so smothly in any gear but stays in all gears fine. When the car is up to temp and the trans is warm it grinds going into second. It's ONLY when the car is warm. Shifts perfectly fine before that. And it's only when I shift from first into second. I can go from third to second just fine and I can pull out of first put into third without letting go of clutch and put it into second without a grind. I've changed the oil to Lucus oil 70w/90 gl-4 rated and there was absolutely no change.
View 1 Replies
My buddies Jetta won't shift into high gear. I am going to take a look at it this saturday to find more out.
View 4 Replies
My 2001 1.8T Jetta doesn't want to shift into 4th (slips in and out) when the operating temp gets to normal value. It looks like I will need a full overhaul. Of course the overhaul price is worth more than than car is worth. I may be able to get a tranny from an 03 Jetta with a 2.0 in it. I think it bolt on but are there any other issues? According to this site the ratios are similar -not sure what R&P is.
[URL] ....
I will be getting a tranny shop to do the work. Is this something that is doable?
View 2 Replies
So I changed transmission fluid on my 1.8t GLS because I was having difficulty shifting out of gears on cold starts. It seemed to work fine for a few days and now I'm back to square one, it still doesn't want to shift correctly!
View 14 Replies
01 jetta vr6 5 speed. Alright so earlier today I pulled out the driveway. (Hard) was in 1st gear around 3 or 4 grand and I stomped it. Got to 6 grand and hit 2nd. Took 2nd to 6 grand and let of around 60 mph. After that I short shifted into 3rd, 4th, then 5th. I noticed going into fith was hard. Had kinda rev match to get it. I stayed in 5th till I got to my destination roughly 4 miles. When I came back out to leave I had a hell of a time getting it into reverse. On my way home it was extremely hard to shift and now when the car is running I cant get it into any gear. This is what I did.
Car shifts fine with car off.
Car will not shift with engine running.
When started in gear with clutch depressed I can still let the clutch out and stall the car.
When starting car while in gear with the clutch NOT DEPRESSED the car jumps forward.
I can figure it out ove tried re adjusting the linkage. Nothing.
View 6 Replies
Decided to see if any of you fine gentleman could offer some insight into my shifting problems. OK so here it is. I have a short throw shifter and it shifts perfectly at lower RPM's ( under about 3k) anything over that and I have to somewhat force it into gear. I also noticed that when in neutral the shifter seems off centered to the right about an inch roughly. I had the R into VW for some other work recently and they said it was prob the short throw itself so I ordered a new one which should be here tm. Hopefully that will take care of this problem
View 5 Replies
I just picked up another GTi and knew the transmission was iffy when I bought it. I had to deal with the serpentine belt tensioner which is now new and also a new waterpump since it was wobbling.
I've already drained and replaced whatever oil was in there with VW G60 Gear Oil which is what my Dealer here told me to put in and it shifts smoother now but still has the same issue. I also did the Shifter Cable adjustment to see if that was the problem but that only made it easier to shift but it still got stuck.
Basically what happens is when driving I shift into 3rd gear and when I go to shift out of 3rd it comes out of gear but it's like it hits a brick wall and will not go into the home position. I was hoping the adjustment and new oil would work but it hasn't done anything.
View 2 Replies
So I have an oil leak I can't figure out. 2001 jetta vr6 5spd. The bottom of the car is covered with oil. It appears to be leaking above the transmission. It will consistently drip at idle. Oil sits on top of transmission and then Leaks down over the starter. It doesn't have any coolant leaks. Is there anything anything in that area that could leak oil that bad?
View 11 Replies
I recently started having an issue where when I shift from 1 to 2 I'll get a quick grind of the gears. Here are the circumstances:
- the clutch is completely depressed, just the act of moving the shifter from 1 to 2 causes the grind.
- only when the car is moving.
- one time I was driving and coasting for a while just shifting back and forth from 1 to 2 with the clutch fully depressed and it kept happening.
- if I shift really slowly I can usually prevent it from happening, though I don't think it's RPM related.
View 20 Replies
My auto transmission is sticky at times. This usually happens after an hour of driving doesn't happen all the time. The gears start to change at high Rpms like 5 to 6k. It's real annoying. Otherwise the tranny is very smooth , like butter . Shifts into all gears.
View 2 Replies
I'm trying to get to the manual transmission input shaft seal on my 01 GTI w/12V VR6. I've removed the 3 bolts surrounding the input shaft but the metal shroud underneath the 3 bolts seems to be adhered tightly in place. You can see the 3 bolt holes and metal shroud in this photo: [URL]
Am I on the right track in trying to remove that shroud? If so, how do I loosen it?
View 8 Replies
