Golf IV / Jetta IV :: 2001 - Makes Clicking Noise When Turning Left
Aug 10, 2015
Recently had this problem which started up about a week ago where my car would make this clicking noise whenever I turn left while driving. When I turn to the right there is no noise. Some said that it could be that CV joints need to be replaced. I have a video showing the side that is making the sound, maybe there is something abnormal that I don't see.
[URL]
View 3 Replies
Advertisement
My Jetta makes a clicking/clanking noise when I turn my steering wheel from standstill. I was told it was my CV joints. So I replaced them and its still making the noise. I was told then it was my struts/shocks. Is this true? The sound is coming from the front driver side wheel. Also, when looking at this tire. I noticed that while this one does have some wear it is even throughout the tire. However, this tire has more wear than the others. The others look brand new.
View 5 Replies
So I have a 2004 gti that makes a very loud noise when i turn the wheel even slightly to the left there is also a vibration that shakes the whole right side of the car. I assumed based on the sound and vibration that it was the wheel bearing. the bearing was shot but when i replaced it nothing changed. so it has a brand new wheel bearing and the cv joint is good ive already checked it everything seems to be as it should. i cant think of anything else it could be. What the problem could be caused by?
View 11 Replies
On my xl-7 upon turning left it makes a poppping noise, its real bad at complete stops,its almost like a cv axle noise. Ive taken it to the dealer at least 8 times and they replaced struts , but it still makes this noise.I also called the main Suzuki customer office and complained. They told me its just one of the characteristics of the new Xl7.
View 4 Replies
I've recently replaced the power steering pulleys and belts. Now when i turn car, it makes a clunking /clicking noise and sometimes the power steering tugs back a bit. 2010 camry.
View 3 Replies
First off my trucks a 2000 v10 f250 with four-wheel drive and 2 wheel abs with about 230000 miles on it.
I Recently replaced my unit bearing on my drivers side because I thought it was the cause of a grinding that only happens on hard left turns but I wasnt the cause it was going bad causing play in the half shaft. I didnt seem to notice and wear on the shaft from bad needle bearings but I have to take it all apart again to be sure. Was just wondering what else could be the cause of this noise. I plan to pull the axel shaft and change all the seals.
View 3 Replies
I recently replaced my driver side axle due to the inner CV joint boot being ripped. Its a 2001 Jetta VR6 with 173,000 miles on it and I have been driving it with a ripped boot for about a year and finally decided to replace the whole axle last night. I replaced it with an aftermarket axle (was on a budget) and the job was fairly easy. Since I did it late at night I was too tired to take it for a test drive so I waited until today. When I was driving it all was well until I took a right turn and I could hear a very distinct clicking sound coming from the driver side wheel well, it is constant throughout the turn.
The noise is only present when taking turns above 20mph and it sometimes even occurs when driving in a straight line. Take note that I have not had an alignment done yet since I had replaced the axle. The car is lowered about 2 inches on Raceland coil-overs that are pretty old and I think they are shot. But like I said the car has NEVER made this sound until I just recently replaced the axle. I am at a loss of what it could be and I am trying to sell the car currently so I would like to get this problem sorted out as soon as possible!
View 12 Replies
It goes wubwubwubwubwub when I turn right, wheel bearing? Kinda annoyed as I just got the car...2001 gls
View 8 Replies
When I turn left a "clicking" noise appears, it's rhythmic and I figured it was the CV joint at the drivers side going bad. Bought a new one and installed it. Clicking seemed to get away for maybe 5-7 days. Then it occurred again. Because the package in which the cv joint arrived was very roughed up I thought maybe it took damage during delivery and bought a new one. Installed and guess what? Took a drive after that, NOTHING and now it's clicking again. It's so loud you can hear it when you drive behind my truck and I'm turning. Doesn't seem to make a difference if I brake or not.
View 14 Replies
I have bought this car in 2006 and had a trouble free experience so far. My car had roughly 170000 Km on it. This very first generation Prius from Japan and all the instruction is in Japanese. Engine: 1NZ-FXE
Main Problem: At times when the turtle sign comes, the engines makes a lot of noise. It feels like the engine is overworking. I also hear some air suction kind of sound from the back of the car (I believe it is to do with the main battery). The car will not accelerate. I need to go to the road side and then turn off the car. Wait for a little while (may be 5 minutes). Turn the engine on and then drive again.
Other problem:
1. Red Triangle is always on (see the pic)
2. Dash Board screen is always and now completely white so I cannot see any error message (see the pic)
View 19 Replies
I have 2016 camry 4 cyl have roughly 2300 miles and I'm noticing a click click while turning the steering wheel left or right while stationary and vehicle running sounds like it's coming from under the dash.
I've seen there is a tsb for other year camry intermediate shaft issue, my vehicle is lowered on eibach Springs and would hate to take back to dealer and have them blame it on the springs in a vehicle that has only 2,500 miles.
View 10 Replies
I have a 2004 Honda CR-V, 100k, just did its 90k maintenance (a little late) and also had the ball joints replaced. Brought back from the mechanic and heard clicking sound when turning wheel hard left or hard right, only at low speeds, usually when parallel parking or simply sitting in park, turning wheel back and forth. Right back to the mechanic: they checked it out, re-lubricated everything, drove it, said it was OK. I got it home, still clicking. Safe to drive this weekend? It's back to the shop on Monday.
View 1 Replies
Changing wheel bearing on mk4. makes noise when i turn to the right. what side is bad? i like working on my own car but this might be out of my hands.
View 12 Replies
I posted in this thread originally: [URL] .....
But today I had my wife drive the car and take some slow left turns while I listened so I could get a better idea about what the sound was and where it was coming from. From inside the garage and in the car, it sounded like it was coming from the rear but I now know it's coming from the front passenger wheel and it is not a "grinding" sound at all, it's more of a tick-tick-tick/click-click-click sound.
Applying brakes doesn't change the frequency or quality of the sound, but speed does. The faster the wheel turns, the frequencly of the ticking increases. It doesn't appear to tick/click only once per revolution, it clicks a number of times throughout the rotation and at some points during the rotation it clicks more often than others. Like, tick.... tick... tickticktick...tick...
When going straight there is no noise, turning right, it sometimes might click once or something but it doesn't really happen turning the other way. I've looked at the dust shield around and even tried bending it back a little bit in case it was making contact when I thought it was more of a grind but nothing looks out of place and nothing has been done to the wheel recently other than putting new rims on a couple of months ago.
Wheel bearing? I thought a bad wheel bearing would make noise no matter what direction you're going and pretty much constantly. CV? I thought CV ticking usually only happens at full lock but it ticks even on not so severe turning. Fender liner doesn't appear to be touching the tire, and the car isn't dropped and is AWD so there's plenty of clearance.
So, is this a trip to the dealer? I'm only under powertrain... not sure if something is up if it would be covered. I think wheel bearings are, but not sure about other suspension parts that might cause this.
View 14 Replies
Noticed a clicking noise when only turning left out of a parking lot today? What this could be? Sounds like it was coming from the driver side front wheel?
View 2 Replies
I have a clicking binding noise while at idle, with the clutch out it goes away, when depressed its there. So, is this a bad throw out bearing? Clutches and flywheels?
View 12 Replies
2002 Golf IV 1.9 TDI 4motion 130 hp.
Sometimes (not always) when cornering to the left in a curve the ESP activates even on dry asphalt. A bit annoying.
What I have checked so far; tire pressure, no fault codes on abs sensors, wheel alignment just done (but didn't work). Abs, esp and awd works as normal...
View 22 Replies
'08 F350 6.4l 4wd, I had the truck come in with a exploded transfer case. (See pics). Ive read all about this happening to many others. The truck still drove, hubs not locked, plenty of fluid in the TC, pretty sure it was the double Cardan that did it. Anyways I replaced thwith TC, replaced the front driveshaft, filled the TC with recommended fluid. Test drove and drives great, shifts fine. Only until I turned left.
At slow speeds turning hard or 15-20 taking a turn, it sounds like a ratchet clicking from somewhere on the left side, right around the drivers door, from what I can hear from the cab. Does it in 2wd, 4wd hi/low, hubs locked or not. I changed the vacuum pump, no leaks, changed the IWE solenoid, pulled out both locking mechanisms, tightened crossmember, checked everything from the hours of research I did on the internet. I cannot find the problem. I don't know what else to check. Front axles free spin and lock when they are supposed to. I'm at the end...
View 6 Replies
2K 1.8T Golf. Lowered on Koni struts and neuspeed street (red) springs last year. Rear axel bushing done soon after. Replaced front and rear strut mounts and bearings at the time of struts and springs. Rack died on me in the fall so I had it replaced along with newer control arms and upgraded bushings. Aligned right after the rack was installed and ran like an arrow until last weekend. Now it pull to right, more as I speed up. I also noticed that when I turn left, the steering is much stiffer then steering left (full turns and mild turns).
PS fluid is still full. My ball joints are about 3 years old so I'm leaning towards that direction. Especially after this past winter and the never ending pot holes in Detroit. The shop used moogs and were regularly greased as they had zerk fittings. I think I hear some clunking upfront but I'm unclear as my old GHL Muffler weld finally gave out and is having by a hockey lace and it is rattling every time I accelerate or hit a bump. I'm going to jack it up this weekend to do some exhaust work so I'll give it a good once over and shake down what I can.
View 3 Replies
Recently I lowered my .:R pretty low on fk highsports.. well today i was backing off into my driveway.. When i turned my wheels to the right or to the the left the front driver wheel makes loud noise like tick tick tick.. when i put my wheels straight no noise at all.. It happens when i go forward or backwards turning my wheels to the right or left..
View 13 Replies
My front left tire is rubbing to the point where I can feel it in the steering wheel slightly slowing the car down. This happens only going over about 40-50 and only when i turn the steering wheel like an inch to the left. To better clarify it doesn't rub while turning left going down a slope.
View 2 Replies