Golf IV / Jetta IV :: 2001 - Grinding Sound On Startup
May 23, 2016
My 01 Jetta 2.0 recently started making a grinding sound on start up! had the crank sensor and the starter changed about a month ago and everything was fine but yesterday, for absolutely no reason it would make a horrible grinding sound on start up.Not the typical one where the engine starts and 2 seconds later it screeches (I searched) but while the engine is turning over it grinds. Once it didn't turn over at all just grinding sound. It's not all the time tho either?
View 1 Replies
Advertisement
I've noticed recently that on startup I'll hear a minor grinding noise after the engine has kicked over. Seems to happen more when the car is really cold.
View 24 Replies
Just got this vr6 a week ago and noticed what sounds like a valve clicking, I thought maybe it was low on oil or something, so I just changed the oil and filter yesterday, clicking was gone from what i could hear. Start up today to go to work, clicking is back, I've noticed after the engine heats up the clicking subsides, but when you first start up I'm hearing it tick in the same area. Thinking maybe a intake/fuel cleaner next? My other 24v never did this. I've never taken it over 3k or anything until after it's warmed up.
View 2 Replies
So I was on my to get some food and when started my car it was shaking really bad and had a ticking sound. I popped the hood and the engine was shaking violently, it drove fine one day to walmart and the next day started doing this. I am thinking it could be the coil pack because it was raining when I went to start it.
View 2 Replies
So its been about 2 months since this grinding sound started whenever Im going under 40km/h on my Mk IV Jetta.
Brake pads/rotors that is causing this or something else?
There is a metal/rubber friction smell when I park and get out of the car... It also drifts to the right a little and the alignment was done about 6months ago. I'm guessing its related to the rear breaks or I could be wrong?
View 2 Replies
So I noticed some grinding noises in my Mk IV VR6 the other day... checked my PS Reservoir and it was empty. Topped it up with some Pentosin, then 3 days later it was dry again. Looked underneath the car and the steering racks were drenched...
View 10 Replies
Have had this grinding noise going on with my 2001 gti GLS 1.8t, the cam chain tensioner has been replaced recently. Would really like to get this solved and fixed, car has 81k miles.
Found this video on youtube, same model and exact same noise as mine : [URL] ,,,,
View 3 Replies
My 2003 Jetta GLI was making a terrible grinding/knocking noise when i would turn and occasionally make this "Bong" sound especially when reversing. I took it to my local shop and they say my spring in the front left is "either broken or unattached" and that i need spings/struts. I have like 150k miles on this car so the timing is probably right. So my question is, how much should they charge for this? Also, what should i have them order and install? Im not trying to lower or anything like that, OEM or a slight upgrade is what im looking for....
View 9 Replies
My G1 prius (2001) started making a grinding noise when I start it up in the morning. There are no warning lights (yet) and it drives fine, but that noise can't be good -- something will fail shortly. I've searched the internet quite thoroughly and there was one similar problem reported, which ended up being linked to the ABS pump. The noise seems to come from the inverter, or somewhere under the inverter. I took a video of it and posted it here.
View 19 Replies
I've had this car for awhile now and it's always had this weird whining sound coming from the engine.I had the transmission serviced thinking maybe that was the sound and it wasn't. I've taken off the serpentine belt and spun all the pulleys. I can't figure it out, I'm thinking maybe timing chain but I'm not sure.
View 12 Replies
So im trying to diagnose my girlfriends issue with her car. When she starts it, the car will make a very loud rattling sound, not really grinding, but like metal on metal contact. Sometimes the sound goes away, but when the car is cold it is a guarantee. The battery light is also on, which was not the case when the rattle first started. I first thought (and hoped) it was perhaps the serpentine belt tensioner as I researched that when it fails it can make a loud rattle sound.
Once replaced, the same issues occurred. So I went ahead and put the old one back on since it was not the issue. Note that the old one and new one both shared the same tension applied to the belt and the pulley was still smooth without issues.
Using a stethoscope to try to determine the location of the rattle a bit more precisely I found the noise to be coming more from the alternator. Weird because I recently replaced it within the last year. I went ahead and removed the tension from the belt and played with the alternator for a bit. The clutch felt good when i used a screw driver to hold the fan and tried to move the pulley. One direction moved with ease while the other direction refused to budge, perfectly normal as I researched. The thing that I noticed that I thought was unusual was the fact that the shaft of the alternator had some play (Video below).
The belt has plenty of tension on it so i do not believe that it is slipping on the alternator. I push the belt with the tensioner engaged and the tensioner does not budge.
I decided to measure the voltage coming off the alternator with the car running and it was at 10.95 which im pretty sure is very low for these cars.
View 2 Replies
I just got a 2001 Jetta 1.8t 100k miles, and had some repairs done - timing belt - K03S Turbo - Forge Tip - 2.5 Turboback Exhaust. I bought the car without a working turbo, yesterday I got the car back from the shop and it was a night and day difference..... but to my point, today I had some CEL's pop - Charge Pressure control positive deviation, Pressure drop between turbo and throttle valve, and secondary Air injection system incorrect flow detected. Now I have never owned a turbocharged car before, but when my windows are rolled up and im accelerating, I can hear what I am guessing is the turbo starting to spin over by my passenger side(2k ish rpms+) except it doesn't have clean spin sounds, kinda sounds like bearings are goofed or something. This noise only happens when I am accelerating or cruising? I also have felt really no change is boost or power!!
View 2 Replies
I own a 2001 Jetta 1.8t with Gti front end. So I was driving downtown the other day and I bottomed out really hard and cracked my oil pan. I didn't realize it was cracked and leaking so I drove it home, drove fine with no issues at all. When I got home I parked it and went inside and in the morning I came out and tuned it on for maybe ten seconds. It made a really loud ticking sound that was constant and oil pressure was almost all the way down. So I shut it off and looked and saw the oil pan. I fixed the oil pan yesterday and started it up and it sounded really good and drives fine. But I've been hearing a pretty decently loud ticking sound when everything's up to temp and warmed up. The ticking is only at an idle and it drives like it use to just sounds bad at an idle. Some people think it's my oil pump and tensioner, some people thing I ruined the turbo and possibly internals.
View 4 Replies
My 03 Jetta TDI wagon, with 210,000 miles, had a grinding sound about 10% of the time when I braked, BUT ONLY AT UNDER 5 mph...that is the last couple of seconds before completely stopping. The car braked fine, but the periodic grinding worried me. Two weeks ago, my mechanic couldn't reproduce it; today, however, we did and he identified it as the ABS (and I remembered that sound from the couple of times the ABS has kicked in during winter driving. But my question was safety, and my mechanic says the car brakes fine...he has checked them all around and driven with me...and the fault is the ABS system and not the brakes themselves. Need to verify this? The car runs fine (I am the original owner, and for the first 7 or 8 years had it solely dealer maintained) and I plan a road trip this summer, but I need a little more comfort that the ABS acting up won't result in a more serious problem.
View 2 Replies
I've bought new starter cleaned starter contacts battery contacts jumped it bypassed the ignition and relay but taking a wire and touching the positive to the signal wire..used jumper cables as a direct ground to to the starter the torque converter spins so it's not seased...I don't understand what could possibly be stopping this thing...it's just one click like the starter is jumping out but not enough power to turn... 2002 Jetta 1.8t auto
View 18 Replies
I noticed last week when I leave the house in the morning my car was leaving oil striped down my road. Jacked car up Saturday AFTER RUNNING TO STORE found a little oil on bottom of my car but not nowhere near what I was thinking there would be. Cleaned motor fired up found no leaks at all . However this morning after car had sat 20hrs or so I looked under car before I cranked her up clean.
Got it cranked her up and oil was streaming from the oil cooler. Not on the block side but towards the front of car side of cooler. It did this for a few seconds then stopped. I am gonna order new front and rear orings for oil cooler. I am just stumped why it only happens at a cold start and for a few seconds not consistently.
View 7 Replies
2003 gti 1.8t. I'm having a problem with this engine code, it keeps coming back and when the CEL comes on the ASR light follows shortly and will then come on after every start up.
For the p0171 I've replaced:
Crankcase vent hose.
Y split running to the pcv
MAF
Coil packs
Spark plugs
Fuel pump
I also have done a seafoam treatment through tbe intake and ran a bottle (twice) of injector cleaners through the gas tank.
Nothing has fixed the code. I found cracks in the brake Booster vac line and had the line replaced (brake light would flash under boost, doesn't anymore). Can't find any other leaks except for maybe the secondary air pump (which I haven't replaced yet).
The OBD2 monitors all run. the EVAP and catalytic monitor won't click over to ready. I have a new pcv and a fuel filter coming in the mail in another vain attempt to fix the issue.
View 11 Replies
When starting my car first thing in the morning, for the first few minutes there is a loud roaring seems like. The sound subsides and the car sounds normally after a little bit. The next issue is when I start the car after it is already warm. It starts very strange...It is a little hard to describe. As soon as you hit the starter it just turns over instantly, seems almost prematurely. And when you go to shut the car off, it just seems like it makes a loud noise and the motor abruptly shuts off. I am not too educated with vehicles, and I am just looking for some input. I just purchased this car a week ago with 82,200 miles on it I have never driven a Buick before so these things may be normal.
View 4 Replies
So my VR6 shakes quite a bit on startup and when I turn it off. I figured it was the dogbone mount. I did the clutch trick, jacked up the front end and engaged the transmission. Of course the engine shook a lot, in a forward to back motion, signalling the dogbone was bad. Shifts into and out of 1st and 2nd were pretty rough and i could feel it in both the driver and passenger seats during idle.
Well I just installed the ECS dogbone and while I can't really feel it much in the seats anymore, it still shakes quite a bit once the transmission is engaged. Low end shifts really haven't gotten much better either.
So I am thinking its either one of the other mounts, or the polyurethane bushing needs to be worked in. I am leading toward the former.
View 4 Replies
I hear a bit of exhaust leak noise from engine compartment only at a cold startup, it goes away in seconds. I am 700miles from home. If it's a nonessential fix i will drive home before fixing, or, if an easy gasket replacement, I have two more days here, and tools,garage, and competent support to diy the job.
View 4 Replies
My 2000 Golf 2.0 started making a bit of noise on start-up and also if I rev it to say 2000RPM and then when the RPM goes back down it will hear some sort of "knock". After the car heats up as far as I know the noise is not there anymore.
This only happened today so I though I would check the oil level. It is fine but the dipstick was almost completely covered by air bubbles.
View 3 Replies
