Golf IV / Jetta IV :: 1999 - How To Bypass Alarm Cutting Power To The Starter
Jul 2, 2016
1999.5 MK4 Jetta...
So I mentioned in a previous post that my dome light grounded out and melted the wiring down the A-pillar and into the larger harness. I cut the wire out and strangely am no longer burning up fuse #14 (interior lights, power windows, etc.) but continue to burn fuse #6 (central locking system). Probably the wires melted to the door wires and are grounding out.
Obviously I have to do a bigger fix to get everything re-wired (or just a whole new harness). But really, it's just the alarm that is keeping the car from being mobile, as the alarm is somehow cutting power to the starter (this happened to me before when fuse #14 blew - replace the fuse and boom, you have power to your starter again).
I have searched other forum posts fairly exhaustively with no luck - how to bypass the alarm cutting power to the starter? I know there is a fairly easy way to jump the alarm module connection on the MK3s, but can't figure it out on the same module on the MK4s. Again this is pre-immobilizer.
View 1 Replies
Advertisement
The subjects say's it all, is there a DIY for bypassing the heater core? I already search i couldn't find it...
View 3 Replies
So I had my hood open to check my oil, not a big deal for a 2001 Jetta 1.8t. When I shut the hood, the car decided to simultaneously lock, and now the horn/alarm is going off and the key fob won't unlock the car or disable the alarm. And the keys don't work in the door/trunk so I can't get inside. What I should do?
View 5 Replies
I have a 99 Jetta mk4 and the factory alarm appears to be draining the battery. If the car sits for more than a day with the alarm set the battery light will come on.
If I don't set the alarm it seems ok. I assume it is something with the alarm but I realize there could be some other issues contributing. For example there is a light on the radio that blinks. It obviously uses some power.
I have 3 specific questions.
1. Where is the alarm located and if I disconnect it will is screw up other things? i.e. will the car start and run. Will the remote keys work etc.?
2. Is is possible for ME to disable the auto door look feature. The manual says take it to the dealer but is there a switch or similar that I can access on my own?
3. What is a good battery that people recommend in this size? I noticed the oem factory battery is 575 CCA and I have seen replacements as high as 650 CCA..
View 12 Replies
I have a 2011 camry and was wondering if I need a bypass module to install an alarm and remote start. Its an Autopage C3 rs-1100...
View 5 Replies
My Mk4 2000 Jetta 2.slow has been acting up, a week ago I went to pick something up from my fathers house and a minute later I cam back to start it to only have the idle strange,it as well the throttle being all sorts of weir till it cut out and I had to push it into the drive way. I has the coil pack tested, and it was measured to be right where it needed to buy. I then bought starting fluid and after spraying it into the air intake it started. I had it running till it cut out and had to redo it again. Then when driving home again after putting more in it stopped, I was able to start it again keep moving for another ten second before having it stop again. I am receiving no check engine lights, alternator is good and as wel as the battery.
View 10 Replies
So i just put a brand new head on my car, but in the process, we broke the outgoing line on the power steering pump. So last night, it heated up so much, the pulley blew off. this is about the 5th time ive had to do maintenance to the power steering in the past 3 months, and to be honest, i dont even care about power steering.
how to route the belt where i dont have power steering. i would also like it to route to have no A/C since i will be taking this out too.
View 5 Replies
My jetta has been cutting off at stop lights ... I've been reading all of the posts here and come to the conclusion that I needed to replace the crankshaft position sensor...once I found the sensor, hours later...I was able to remove it...it's been a week now, and the car runs great!
View 2 Replies
I recently replaced my SAI pump rivets with stainless bolts so everything is nice and tight. However, the pump will randomly cut on and run for a few seconds while driving... i notice it usually when I come to a stop, such as at a stop light. I would assume this is because there is an air leak somewhere in the SAI system... sound likely? Maybe purge valve? I haven't yet had it pressure tested in case there is something I can easily to to rule out most potential sources.
View 8 Replies
2004 GTI VR6 24V Manual trans. My son's GTI has an intermittent problem that I think will be hard to pinpoint because it is intermittent. I will hopefully have more info this afternoon. Three time now after driving about 20 miles the car will cut off. Usually while slowing down to a stop or to make a turn. So far it has run great at highway speeds.
It has some random symptoms. I drove it to work and it happened to me. The first time I had slowed to about 20 to make a turn and it cut off. I made the turn and let out the clutch and it bump started and I made it to my work parking lot. While turning into the lot it cut off again so I coasted into a parking spot. This part has me puzzled it would not crank the starter. I moved the gear selector to every gear and nothing. I put it in reverse and the starter would crank but would not start.
Came back about an hour later and it started fine and acted like nothing wrong. Drove it home and again about 20 miles and it cut off again. This time it would crank in all gears but would not start. This time the EPC light came on. Left the car and came back later that night and it started fine, EPC light off and drove the last two mile home no problem. I am borrowing a friend from work computer with the VAGCOM software and hopefully will have more info.
View 21 Replies
I've read what little information I can find about making a glow plug bypass, but everything so far applies to trucks with glow plug relays. Since mine is an Excursion I have a GPCM instead of a relay. How I might accomplish this?
View 3 Replies
IPR CF2 Byasss High Flow Coolant Filter Ford 6.0
Made for the 6.0, the biggest problem on the 7.3 might be finding real estate for the filter assembly.
One review refers to using it on a 7.3.
View 14 Replies
I have the 4r100 transmission how do I bypass the safety switch? Also what are your thoughts on starting the engine with the transmission out? I know to bolt the spacer plate to the engine.
View 7 Replies
2000 Golf GTi 1.8t
Key fob has not worked for awhile so I use the physical key to lock and unlock the door. I locked the doors when I went to the movies last night come out and unlocked the doors as I always do, Get in and start my car and the alarm starts going off.
So of course I have a little freak out moment after about 30 seconds it went off. So I turn the car off and start it again same thing happened. I say screw it and drive it and the alarm shuts off once more.
I did notice when I got home and turned the car off the red light by the drivers side door lock knob was blinking.
I have looked all over the place and everything that I read says the car won't start. My car starts and drives just fine it's just when I first start it the alarm goes off for about 30-45 seconds.
View 3 Replies
My 04 jetta, if I use any buttons on the remote it sets the alarm off. I've checked with a vag com and can see all the doors, hood and trunk open and close. Central locking works, it locks at speed, and will lock / unlock all the doors from the drivers door lock .
View 3 Replies
Well my alarm is not working properly, when lock my doors all my doors lock but yet my headlights don't flash and i dont get any alarm chirp..
View 2 Replies
I found out why my alarm would not honk on arming.. the hood microswitch had fallen out of the latch.. i can't for the life of me find the right place for it.. Looking for a pic of the proper install?
View 18 Replies
Removed battery cables and held together to clear ECU ... Re-attached and no crank not even a click ...
View 3 Replies
So I have the well known starter grinding noise since I bought the car six months ago. Is there really any danger to the flywheel or the starter itself not fixing this? I don't mean from a purist point of view, of course it's not good. I don't really care about the noise. Does it maybe 1 out of 3 starts in the cold. Are things really getting chewed up, or it's really no big deal.
View 13 Replies
I've bought new starter cleaned starter contacts battery contacts jumped it bypassed the ignition and relay but taking a wire and touching the positive to the signal wire..used jumper cables as a direct ground to to the starter the torque converter spins so it's not seased...I don't understand what could possibly be stopping this thing...it's just one click like the starter is jumping out but not enough power to turn... 2002 Jetta 1.8t auto
View 18 Replies
So in my 05 gti , the door ajar light stays on and when it does go off it will randomly blink ! I'm guessing there must be a loose connection somewhere ? Also all of a sudden my alarm will randomly go off . It's annoying . I'm not sure how to fix it .
View 1 Replies
