Golf IV / Jetta IV :: 1.8T 2004 Automatic - Shifter Hard To Move In Cold Weather
Dec 30, 2015
I've got a 1.8T 2004 automatic and the problem I'm having is the shifter is harder to move since the weather's been colder. It shifts very well and is responsive, it's just that I have to pull it harder to select P, R, N and D. D is especially hard (no pun intended you sick minds! ) to select, the shifter kind of stays in neutral but shifts after a bit. Is there anything I can do to fix this?
Side question: is the rear defrost supposed to turn off after a certain period of time? My 2002 golf does it but the jetta doesn't.
View 5 Replies
Advertisement
So after owning my R for just over a week I've noticed that when I accelerate hard or let off the throttle the shifter seems to move quite a bit. Is this normal with the stock mounts or is it something I should have looked at? I know the stock mounts are rubber to aid in isolating the vibration of the engine but it seems like the shifter moves a little more than I would expect.
View 1 Replies
Corolla '04: I have to press the brake pedal extremely hard to get the shifter to move out of the Park position.
View 5 Replies
2000 VR6 automatic. Yesterday my car was stuck in park couldn't move the shifter . Figured it was the brake sensor switch when the brake is engaged food pedal lights do not go out, I replaced it this morning but still won't work I've been driving it around in limp mode?
View 4 Replies
I have a 2004 2.0L Jetta with a 5 Speed manual transmission.
When shifting into third gear sometimes I push the shifter forward and it does not want to move all the way forward. It feels like I am pushing the shifter knob against a wall, or more accurately the bottom of the shift that pulls the cables feels like it is hitting a wall. If I pull it back out and press it in hard it will go into place sometimes.
This also solves the problem: While the shifter is mid shift into third, at the wall/ at the point of resistance, I let off the clutch slightly to give the flywheel some friction. This rolls the transmission a bit and allows third gear to slide into place.
I have experience with a MK4 Audi TT 1.8T that cam with a 6-SPD and it at had a 1-2 and 2-3 synchronizer issue (The one where the nipples are worn and it grinds at higher RPMS because they can no longer make a firm handshake). The issue I am experiencing is not that.
Could it be the transmission cables? Could it be some other cogs in the transmission? - If so does this mean I need to buy a used one? My car has 180K miles on it with the original clutch.
View 5 Replies
When the car is in gear it's great! Or at least it seems great. However, trying to place the Shift Lever in the car into the gear "slots?" is troublesome.
It feels as though there is a wall in the way for each gear, and i have to force my way through the wall. It's not absolutely Terrible, for i've been driving like this for months. But i want a smother shift! I want to be able to just slide the Shift Lever into gear without any hangups or major resistance.
Double Clutching seems to work, however it might just be from the small loss of RPMs through the process of double clutching.
Personally I would rather not have to double clutch just to see a slight improvement. I have big feet and they constantly are rubbing on the floor mat as well as the plastic above the pedals, so double clutching always feels like i'm wedging my foot into a hole, then back out and in, before i can go into another gear lol.
The problem is only a real issue when i'm in higher RPMs giving the car more gas. I.E. after a fast launch in first, shifting even around 5500 puts a WALL up on second gear making it impossible for me to get it into second gear, after not getting it into second i usually throw it in third, and essentially lose all the acceleration i had from the first gear launch.
As well is there anyway to make the clutch a little stiffer? She grabs fine, i just like stiffer clutch, it requires less of me trying to wedge my huge foot on the pedal.
It's an un-molested MKIV Jetta VR6 with 167k.
View 10 Replies
Installed some shifter cable bushings. But now reverse is harder to get to. Instead of just pushing it down and left for reverse.. Now I have to tilt the shift know slightly towards 4th gear then push down and go left and the gate seems so much smaller now. Overall it doesn't feel that much better than stock. what could i have done wrong?
View 6 Replies
Is it a good deal to buy a 1.8t jetta with transmission problems. Won't go on reverse when the car is cold. 1500? mk4 vr6 .....
View 10 Replies
This is the second year I've owned my 2007 Prius, and it seems to be getting worse.
In the summer, the hatch will open with ease! The handle recognizes my hand there and unlocks the hatch and whammo bammo we're in business. In the winter, especially the really really cold weather like we're having now (down to about 10 over night) the hatch refuses to open.
View 19 Replies
How to diagnose what I think is a failing alternator?
Here are the symptoms:
- Hard starting in cold weather
- Battery not at full voltage when truck is parked (usually around 11.5-12 volts. I have been putting a charger on it some nights)
- Lights seem to dim when I've got accessories running, like heater fan, heated seats etc. Lights get brighter with engine RPM, like when pulling away from an intersection.
What's my next step to diagnose this? I did a search, and didn't see anything. My battery is probably still under warranty, so if that's the issue, it should be a free fix. How hard is it to install an alternator in a 2005 with 5.4L engine?
View 3 Replies
Got in to go to work this am, and the gear shifter was difficult to move. What to check?
I drove 70 miles to work and didn't seem like any issues with the transmission shifting.
Got in to go to lunch and it seems even more difficult to move...
Shifting back and forth in the selector seems to loosen things up a little.
A friend move the selector while I looked at the linkage and the bracket that support the cable is flexing while shifting between gears....More likely a transmission issue or something with the linkage?
View 24 Replies
This morning as I get in to drive my kid to school (2005 2.7 2 wd auto) as I go to put it in reverse I noticeably have to pull it with some force. I have never had to "force it" before, it had always switched gears with ease. This time it felt very stiff but had no issues going into gear. After I dropped my son off at school I went through the gears up and down and it felt very stiff (at this point i have no issues with starting it or P).
At lunch I go out to get something to eat and when I go to start it up it won't start. I try and try and nothing. All the lights came on, it's not a battery issue at all (brand new). But after 10 tries it starts, so I'm pretty happy. Then I go to put it in gear (reverse) I can not press in the button on the side of the gear shift. It will not go in. I press with all my might and it wont budge. But again, after about 10 good tries at it goes in and I can then select my gear but still feels very stiff.
After stopping again I didn't shut off the engine and dicked around with the shifter basically figured out that my car is not recognizing Park. On the instrument panel each gear lights up but not P. It gets very stiff when trying to put it in P but it doesn't actually go into P. If I put it in P (or really the further up it will go) and shut off the car, it won't start again. I can start it up in N and only N.
View 9 Replies
1999.5 Jetta 2.0 Lit, engine 186000 miles, bough it few months ago and this issue is driving me crazy.
Engine Light "ON" and "OFF" depending on weather conditions.
On my , No Engine Light in Cold and humid weather. When weather is hot the light goes ON.
I was thinking on changing the O2 sensor(the one after the catalytic) I do not know if this will solve my problem,
I will like to change the oil, it is using regular 10/30 SAE what grade and kind will be suggested?.
View 1 Replies
My cousin has a 2007 Ford Taurus with the pushrod 3.0L. It has the console shifter and it is hard to move the shift lever into Park from Reverse. The shifer moves out of park and to every other gear with normal effort. The gear indicator correctly displays the shifter position. It drives/shifts perfectly fine. The only problem is that it is hard to move the shifter from Reverse into Park. It feels like there is a rubbery, or somewhat mushy threshold/resistance that needs to be overcome with a moderate amount of effort to get the shifter into park. Once the shifter is in Park it feels normal meaning you don't have to hold or force the shifter to stay in park.
It is frustrating because it seems most other people have a problem with the shfiter being hard to move from Park to Reverse or Neutral, but she is having the opposite issue. Will it hurt the car to keep shoving the shifter into park when necessary without getting it fixed?
View 3 Replies
Just bought my 2004 Jetta GLS from a dealership last week. 2.0 Engine. Has 140K miles on it. 2 hour drive from the dealership to home was cold and foggy but it ran fine. In town stop and go traffic in foggy conditions since last Thursday and it has run fine. Got a downpour this morning and all of a sudden it is running choppy and the CEL is flashing at me.
I have a 96 MK3 as well that would run badly in the rain until I changed out the Electronic Coil. Got so I would carry spares with me.
Is it the same fix for the MK4 2.0? I've also read about using epoxy or JB Weld to coat the coils and keep the water out. Does that work for the MK4 Ignition coil?
View 6 Replies
I have a 91 Miata Auto. I bought it from someone that (I think!) never drain auto trans fluid during its 145K mile life. So last year I replaced all the gaskets/filters and tuned up the car. It runs fine except shifting harsh in cold weather. I have to mention that it seem to have no power and goes very slow on first few minutes.I used a pump to suck trans fluid out. It was so dark (even I dropped the trans pan and replaced filter/gasket). Then I pumped Lucas trans fix fluid in and it seem to improve. What should I do more to reduce the harsh shift condition in cold weather? Or is there a booster module need to be replaced?
View 6 Replies
I have 2002 1.8t jetta 5spd with 200k KM, last winter it was difficult getting into gear when it was cold. the fluid has never been changed, so that might be the issue.
View 4 Replies
I picked up a 2004 GTI not long ago for pretty cheap because it had a few issues. I am working my way through them. However, having 3rd gear issue.
All other gears are perfectly fine but there is way less play in the shifter in the 3rd gear position and I have to hold the shifter in position until the clutch is engaged (pedal up) to avoid the gear grinding. Once the clutch is engaged it stays in 3rd gear fine. It doesn't matter if I am moving from 2nd to 3rd or 4th to 3rd. Same deal. I have aligned the shifter several times using to proper procedures with no effect.
It never grinds 3rd with the clutch disengaged (so the synchro is fine?) and it will bang shift no problem. Oh and the clutch is less than a year old. It was installed by a shop before I bought the car. It's not really a big deal, but I would like to fix it. If I have to swap the trans that's fine, but need to figure out if it is a trans or linkage issue first.
View 1 Replies
My 2004 expedition wont go into any gear the shifter will not move I changed the stop light brake switch and a 30 amp buss fuse I found blown and also the check engine light is on now too this was after I parked it I also changed a 30 amp buss fuse I found blown out but it still don't work the only way I can get it into gear is to push the little button under steering wheel...
View 2 Replies
I've got a 2003 Xterra, RWD, manual transmission, with around 110k. It's been giving me a little trouble shifting into gears 1-3 when the weather's below 30F. It started doing this when I got the transmission fluid changed last, about 2 years ago. I took it back to the mechanic who fixed it immediately, and he changed the fluid a second time for free, but when the problem persisted, he said he had no idea. Needless to say, I haven't gone back to him. Since then, I've tried to ignore it (not too hard in sunny NC), but it's getting worse and I'm about to move to Chicago, so I think I should fix it before I move to the land of harsh winters. My first guess would be the tranny fluid weight might be a little low and I should try a heavier weight.
View 13 Replies
My 2006 Ford Fusion SE V6 has trouble starting in cold weather. Once it starts, it's fine throughout the day, but once it sits a long time, like overnight, it has trouble starting in the morning. If it had a carburetor, I'd say the choke wasn't working. The dealership couldn't figure it out a few years back. I even tried a new battery and that didn't work. Is there a sensor that detects cold weather and increases fuel flow or chokes off air flow for richer starting mixture that could be failing?
View 12 Replies
