Golf/GTI VII :: Turn On Automatic Rear Wipe When Put Car In Reverse?
Dec 4, 2014
How do I turn on the automatic rear wipe when I put the car in reverse? I already activated it in the car's menu but it still doesn't do it when I put the car in reverse. I am still trying to figure out the automatic wipe for the front also . Had it activated in the menu and also left the stick in the int position...going to see if it work tomorrow in the rain. Having problem with juddering issue on their wipers (front and back)? I got the for about 2-3 months now and today is the first time I drove it in the rain so haven't notice these issues since I got the car.
View 8 Replies
Advertisement
Is it a good deal to buy a 1.8t jetta with transmission problems. Won't go on reverse when the car is cold. 1500? mk4 vr6 .....
View 10 Replies
The Golf seems to be ''stuck'' in reverse. (Long story short, my gf backed up the Golf into the driveway and she wanted to re allign herself, she put it back in reverse and once done, shut the engine. Now, the Golf is 'stuck' in reverse' ....
When I try to turn the key on 'on' while applying the brakes, I tried to put in Park or Neutral, the stick won't budge one bit! I don't want to force it either.
What may have caused this and what can I do to get it 'out of reverse'?
Car: 2012 VW Golf 2.5, Automatic Transmission.
View 7 Replies
Looking for wiring diagram for automatic dimming rear mirror for golf 7.
View 9 Replies
Why after disable DRL , When I do reverse only the passenger rear white light turn on. Before both turn on.
View 2 Replies
My car has been acting funny when I first turn it on I can't get into Reverse. But when I got to work today I could go right into reverse and park at work.
Then leaving I went to try and nothing the shifter I can push down and go to the side but will not go up like it's not even meant to do so. But by the time I got home and had to reserve a little and got it right in and I can reverse find no weird sounds or anything.
View 13 Replies
I noticed a few days ago that when I back out of my driveway, or any time I go in reverse, when i turn, either direction, it feels lime my rear wheels are skidding across the pavement. Now I know that can't be happening because it hasn't always acted that way and it's just illogical. But what it could be, cv joint? Do I have any in the rear.
View 7 Replies
I just got back from being gone awhile to find that my rear view camera has stopped working. I get a message that says "rear view camera system is currently unavailable" when I put the car in reverse.
The camera does come out like it should so I'm guessing it's something to do with wiring maybe a short or something. I have a 2014 RCD-510 with the camera input...
View 6 Replies
1986 S10 blazer automatic transmission won't go into reverse OR neutral! It goes fwd in both reverse and neutral. It goes into park just fine. The fluid is full and not burnt. It will drive forward when in reverse and in neutral. I turned the engine off and checked neutral, it was not in gear but tried to go forward as soon as I started the engine.
View 16 Replies
1986 S10 blazer automatic transmission won't go into reverse OR neutral! It goes fwd in both reverse and neutral. It goes into park just fine. The fluid is full and not burnt. It will drive forward when in reverse and in neutral. I turned the engine off and checked neutral, it was not in gear but tried to go forward as soon as I started the engine. I have never seen this!
View 11 Replies
Reverse stopped working after it's been driven for a while. It works when it's cold. I'm actually hoping this was caused by my stupidity (though it may have nothing to do with the problem). A while ago I wanted to change my oil, but opened the auto transmission plug instead. I decided to put new trans. fluid in it. I thought I would add trans fluid until I could see it on the dip stick. After the problem with reverse started I tried to again read dip stick but can't tell where the level is, so I decided to drain trans. fluid to measure it. Owner's Manual calls for 8.8 qts. Drained fluid measured only about 4 qts. I added more. Now it looks like dipstick shows it ~2 inches above the full/hot mark. Questions:
1) Would fluid level affect reverse and not forward (with which there is no problem)?
2) Is method of draining trans. fluid & measuring it a valid way of telling how much is in it, i.e. would all... or most... fluid drain out so the 8.8 qts. in the owner's manual should be added back in?
3) Am I misreading the dipstick? I've tried letting it set for 4 or 5 days, but still fluid seems to smear high on the dipstick.
View 5 Replies
I just purchased my first VW about a month ago. (Golf tsi white auto). I love the way the car drives/handles. But I was surprised because at just under a 1000 miles the engine light went on. Took it to VW service to check it out. They had to keep it for a few days to do tests with the main VW center. I got the car back without much explanation other than they put in an O2 sensor.
No engine light now for a couple weeks. They also noticed that my wheels are missing 4 lug nut covers (not a big deal). For some reason I am just starting to notice the green brake light on when I first turn on the ignition prior to setting in reverse which disappears upon reverse or drive. I assume this is normal... Question: should I be concerned about this engine light O2 sensor issue?
View 2 Replies
I'm a proud owner of 2005 Mustang GT, 4.6L with an automatic transmission. Intermittently for the last year or so (maybe once every 3 or 4 months) its been shuddering when in reverse. Today it ramped things up a notch. :-/ The shuddering was pretty dramatic when I was trying to back out of my driveway, I shifted into park for a moment, then back into reverse, and it seemed to be ok. Then when trying to back into a parking spot this afternoon at work (in a parking garage with a small incline) it lost power almost entirely in reverse, lightly pushing on the gas just caused the car to shudder and not move anywhere. I shifted into park, and then back into reverse and heard an audible "pop" (my windows were down, but they hadn't been earlier so I'm not sure if this happened in the morning) and the car did not want to reverse. Rather than risk further damage I decided that it was parked relatively ok (90% in the space, eh good enough) so I stopped.
View 4 Replies
I have a 2000 Honda Accord EX v6 and I have been taking it the dealer for regular maintenance and Oil Change but today I noticed my Car would not start
I can hear the engine start , but when I put the Gear (automatic ) in either reverse or D4 the engine will stop.
Then I waited for some time and restarted it and It was OK.
View 14 Replies
I'm having trouble with the automatic transmission in my 04' Elantra, it acted like the speed sensor was failing, but later the same day it lost all gears, forward and reverse. after turning the car off and sitting a while I started it back up and had gears again, but the trany is making noise. Fluid level is ok.
View 3 Replies
I'm having problems with my automatic transmission in a 2002 Saturn SL. About 2 months ago I noticed a delay when I would put my saturn in reverse and it would sort of kick into gear after a few seconds (up to 10seconds sometimes). I wasn't worried much about this at first until another problem started happening. Between second and third gear it seems to be shifting slow/hard(?). I can feel where it wants to shift, but its slow to shift and actual revs high before shifting down. The problem doesn't always exist, and some days its more then others. We took it to get a transmission fluid/filter change and this didn't solve the problem. Took it back for a transmission diagnositc and GM told us we need to replace the transmission or do an overhaul. They didn't explain why really though- no clear answer. I've heard everything from the torque converter to a solenoid problem.
View 3 Replies
I recently bought a decent looking 1999 f250 4x4 5.4 auto. It has no forward gears and will only move in reverse. I topped off the fluids and have found no leaks so far the cooler lines are crusty but dry. I am gonna need to swap this thing out or do some more trouble shooting if there may be a non rebuild issue to solve.
View 4 Replies
According to the manual, I should wait some time to let oil settle, then take the dipstick out, wipe it, reinsert it, then take it out and then check level. Why the wipe and reinsertion is necessary for the level to be accurate?
View 6 Replies
I installed rvc couple of months ago. When I put in reverse, only shows straight yellow lines on screen. Is there any way to activate to lines turn with steering wheel (like cars with parking sensors)? I was wondering if there is Vag_com trick available for this option.
View 7 Replies
This transmission shifted smooth and strong through all gears until today when it stopped all of a sudden to engage either Drive or Reverse. No previous signs of slippage, hesitation, stalling or lack of power whatsoever.
We checked the linkage to the transmission and it works as intended, nothing loose or broken, everything is in place. If there was something slightly different with it from other similar vans we have then it had a slightly delayed engagement in Drive (it took a second to engage it after you moved the lever) - on all other vans we have the transmission go into Drive almost instantly.
Van is a '92 Pontiac Trans Sport/Chevrolet Lumina APV with the 3.1L V6 Chevy TBI engine with the 3T40 automatic transaxle. Where we should start tackling this issue?
View 13 Replies
Is there a programming sequence that will keep my 2002 Camry from locking all doors when the vehicle is put in drive/reverse. I realize this is considered a safety feature but I prefer to lock them myself.
View 10 Replies
