Golf/GTI VII :: How To Change Halogen Headlight Bulb
Dec 29, 2014
So I bought a set of Phillips XTreme Vision bulbs for my GTI VII S. Problem is that I cant seem to open the rear housing of the headlight on the drivers side to gain access to make the switch. The gearbox is right behind and there is barely room to get my hand back there. Is there some trick I am overlooking?
View 3 Replies
Advertisement
2004 W12 Phaeton ... I remove the Air Filter cover and filter, I am not sure if the round fixture on the Air Filter housing is the headlight fixture or how to remove and replace it. I am able to move it inward and outward, but not able to remove. should I remove the Air Filter housing to get to the bulb??
View 5 Replies
I am lost on how to change the headlight bulb on my girlfriends 2001 passat. I am wondering do i need to pull the whole headlight out to do it?? or just take the bulb out.
View 8 Replies
I have an '06 Toyota Avalon XL and I bought some Silver Star 9006 bulbs at AZ the other night, but when I got back home, pulled into the garage and popped the hood, I was amazed at how much of a PITA it looked to remove the low-beam bulb, especially on the driver's side. I'd hate to take it to the dealer just to get the frickin headlight bulbs changed.
View 2 Replies
My husband is rebuilding our 07 Prius that has HID Headlights that were both broken and does not want to go back with HID due to cost. He wants to install complete Halogen Headlight assemblies from our parts car. He has rebuilt several Prius' for friends and family but has not done a change like this so he understands the basic differences but is stuck on the Wiring change to handle the low and high beam differences. Wiring is not his strong point!
View 19 Replies
One of my headlights burned out.
I was looking at ECS and saw ES#1059.
Just want to make sure that this is the right bulb.
View 4 Replies
I have a couple of questions regarding changing out my headlight from halogen bulbs to an HID kit.
1st) What size bulb are the low beam (headlights)?
2nd) What HID kit would be recommended? I am trying to replace the halogen bulb with an HID bulb, a plug and play HID kit that will last but also does not reflect every where such as replacing reflectors with halogen to an HID kit.
View 1 Replies
I have a 2008 Prius pkg 6, passenger side headlight goes out, and then later comes back on. Went to parts store and they sold me a lamp to replace it with. Not only do I not know how to replace it, I do not know whether it is a Halogen or HID lamp?
View 10 Replies
Well one of the bulbs in my regular halogen housings went out, so I went and bought a pair and replaced the bulbs. Everything was great until I took a testdrive and noticed I was signalling MIR (or I guess the ISS this millenium) illuminating road signs very well, and the ground not so well...
View 2 Replies
My drivers side headlight bulb went out a few days ago and I haven't had the time to get a replacement. Any DIY's or tips for changing them out.
View 8 Replies
I finally purchased an RX30 for my wife. The Halogen headlight isn't all that bad, but I am used to drive with HID. Therefore, I am buying HID kits for my RX350 Headlight. Whenever it is shipped to me, I will take pictures of the progress.
1/ Link to buy HID kits, OEM is 55W (no need for extra Hardnes) and 6000k is common factory color.
This will come with everything needed to convert your light bulbs into HID white colors. For more Colors please check out the guide on the website.
I recommend this site, because I have used it, purchased it, and have had no problem with it so far.
2/ According to Manual Book
****Low Beam is H11****
Fog Lights is *****H11*****
****High Beam is H9*****
**** 55W *****
3/ The installation should be Relatively Easy
--Take off engine plastic cover on both side--
--Access the Light Bulb--
--Use the OEM Plugs into the Ballasts input of the HID KID--
--Mount the Ballasts at a convenience locations, I had great success with Plastic ties--
--There is a Plugs output from the Ballast, Plug it into the HID Bulbs--
*****If the lights don't turn on after installation, try to switch Polary, or turn the original plugs around
****** Halogen doesn't care about Polary, but HID Ballast does.
--Install the HID Bulbs the same as regular Halogen Bulb--
--Check the HID carefully, make sure that both will work--
First time Installer common trouble shoots.
1/ Only 1 light is working......Switching the bulbs, or Polary will solve your problem
2/ Lights common for a short time then turn off, until engine restart......You will need the Hardness Relay, which should not occur in our car. The factory hardness is good for 55W
3/ Bulb Visually contain Contaminants, or White particle inside.......HID Bulbs has Special Salt in it, which is required for a longer life in the Bulbs. This is the way the bulbs are.
View 13 Replies
This just started happening a few days ago. The right bulb will turn on normally with the rest of the car, but as I'm driving it will randomly turn off for a second, then power back on. Some nights I won't see the issue at all, other nights it will be doing this every other couple of minutes or so.
View 10 Replies
2002 Jetta, how do you remove the cover over the blinker bulb on headlight? There is a rectangular black cover with a tab at the top. I have tried everything, short of breaking it off, to get the tab to release the cover. What is the trick?
View 1 Replies
Looking for a rundown on LED versus halogen headlight bulbs, especially output and life? Stock halogen bulbs using 55 watts have a 4000K output, and I notice the Chinese imports' output is 3200-3500K. Does that translate into less bright? Also, the windshield wipers shudder across the windshield a lot unless there's a huge amount of rain--changing to new blades didn't make any difference.
View 5 Replies
So a couple weeks ago my passenger headlight started flickering. After a couple days the bulb was out. I bought a new bulb and opened up the headlight to install and found the bulb melted into the igniter. Ok, bought a new igniter. Installed everything. And still nothing. Checked the fuses and wires, nothing loose. Headlight still didn't turn on. Went to my mechanic and he said it's the ballast. I buy a new ballast and he just called and said the ballast I bought was defective. The light was turning on, but no high beam.
Does the ballast control the high beam? If it's not the ballast, what could be the problem?
View 2 Replies
So on the way home tonight my passenger side bulb went out. No big deal, I pull into the auto store and pick up a set of new bulbs. The problem is now that the light that went out is not working at all. I replaced it and reset the bulb to make sure it is tightly connected and nothing. Next I try the other working bulb in the passenger socket and still nothing. All other lights work. City bulb, high beam and turn signal works in the housing.
View 3 Replies
So I think someone reset the headlights on my r32 with a different setting (previous owner) The h7 halogen bulbs do not come on while your driving regardless of the position of the light switch. was wondering is it possible to get a euro switch and program those H7 to be a fog light? I plan on doing a lot of winter driving when the time comes and having a set of yellow fogs support a ton.
View 6 Replies
They sure don't make bulbs like they use to and whats with the high damn prices for halogen bulbs.
View 11 Replies
Looking for instruction on how to change the headlight bulb?
View 14 Replies
My headlight bulb is out on the left side. Tt's just a regular bulb, not HID's or anything. I got a new bulb and it still doesn't work. I checked the wiring and it seems intact. The other lights which are connected in the housing work fine.
View 1 Replies
2008 Santa Fe. Removed 2 bolts and 1 nut as shown in manual. cleared the clip at the bottom outboard corner. What else am I missing? I'm still Unable to remove the headlight bucket. It will only come out about an inch or so then feels like something else is holding on.
View 8 Replies