Golf/GTI VII :: Grinding Noise When Turning Left / Right - Cause?
Dec 1, 2014
I'm getting a weird grinding noise when turning left/right. Doesn't happen with normal turns, just at the sharp extremes. What might cause it?
View 16 Replies
Dec 1, 2014
Advertisement
Yaris/Scion & Vitz :: Grinding Noise When Turning Left?
Yesterday I replaced what I thought was a bad front passenger wheel bearing, I removed the hub myself and took the hub to a local dealer to press out the old bearing and press in the new one.
Took the part back to the shop, got everything all assembled and took it out for a test drive. Right away I notice I still here the same noise, possibly even worse then before.
It was already late in the day so I decided to clean up and call it a day. During my trip home I notice everytime I turned the wheel to the left I here a horrible grinding noise, I did not have this sound before changing the wheel bearing.
Second guessing my own work, I took the car to the mechanic down the road today, not the same place that pressed the new bearing in. The mechanic inspected my work and couldn't find any problems at all. Even the ball joint I thought I had ruined was fine.
He inspected both from wheels for play, no play in either wheel. He then put the car up on the hoist while I remained in the car turning the wheel and accelerating. We were not able to reproduce the sound with the vehicle on the hoist, even with his stethoscope he could not here any noise coming from bearings on either front wheel. Everything sounds great with the car in the air, it's just when it's on the ground when there are problems.
Rotated all tire just to make sure it wasn't an oddly loud broken tire belt, once again no change.
I did replace the stabilizer link kit as well since the old one broke while during the wheel bearing replacement. Is there anyway I could have done something wrong with the stabilizer link that could cause this noise? I doubt this is the case since the mechanic did have a look at it.
I'm still assuming it's the front passenger wheel bearing, but don't wan't to go replacing parts I don't need. (I put a new fuel pump in my TJ 2 weeks ago only to discover all I really needed to repair was the broken wire going to the pump )
So just to be clear my car only makes this noise when it is on the ground, when the car is in the hoist I can turn the wheel and accelerate without any noise.
Santa FE SM (2001-06) :: Grinding Noise When Turning Wheel To The Left
I am hearing a grinding noise when I turn the wheel to the left.. and when I straighten it again the noise goes away.. no noise at all when turning the wheel to the right. what could it be? 2006 Hyundai Santa Fe / 205,000 km's
View 4 RepliesHyundai - Sonata :: 2003 - Grinding Noise While Turning Left
I drive a 2003 Hyundai Sonata. I currently have a slight grinding noise (or maybe more of a low growling) when I make left turns. This happened in the not-so-distant past and it was an issue with the power steering hoses (one had rusted through), so we (and by "we," I mean my fantastic father) changed it out. I thought this time it may just be low power steering fluid, but after checking it, I can say it's not low. I'd think if a hose was the culprit again, the fluid would be low. What we should look into?
View 1 RepliesGolf/GTI VII :: Low Speed While Turning Left - Popping / Grinding Sound?
Got the stabilizer bar recall done in February and have been on a couple of long trips since then. No real issues until about a week ago I noticed at low speed, when turning left, and usually if there was a small bump or incline........like turning into my driveway, there would be a popping/grinding sound. It could happen at speed, but never heard anything. I go last night to install some ECS cross drilled and slotted rotors and flush spacer kit and noticed this on the left front....
Well honestly I noticed first that I needed to wash my car, just got back from the beach and it has been raining here, but is this installed correctly. The bar is bent near the top, easier to see in person and I am fairly positive this is not correct. Called the dealership and they are going to check it out Monda. The picture below is of a left front on a MK7 and it appears to be the correct.
Lexus GS 2006-11 :: Grinding Or Metal Like Noise On Turning Wheel To Left Or Right
I have a problem! I have only had my 07 gs awd for less than 2 months. I noticed this morning when I turn my wheel all the way to the left or right it makes a grinding or like metal on metal noise. My brakes were done only a year ago, and this noise only happens when I'm turned all the way to the right or left.
View 11 RepliesFord F-150 (2004-2008) :: 2005 - Grinding Noise When Turning Left
First I will start off by stating that my truck is a 2005 Ford F150 2WD Regular Cab 6.5 Bed, with the V6.
My problem is, when making a left turn at low speeds, I have a grinding noise that corrects itself upon straightening out the truck. This seems to happen on turns in the parking lots etc. It almost sounds like the tires are rubbing but the tires are the same BFG's that have been on the truck for 40,000 miles and have never rubbed. I am thinking it might be the power steering pump but am unsure. I do not have access to a lift right now but I have done the shake test on all of the suspension components and nothing seems out of place or loose.
Mitsubishi - Eclipse :: 2000 - Rear Left Wheel Free / Grinding Noise When Turning Right
I have a 2000 Mitsubishi Eclipse GT V6 FWD. about 138, xxx miles
My left rear tire/wheel has free - play (clicking movement) when grabbed at ONLY the 3 o'clock position and push/pulled back and forth (no free-play at 12-6 direction) in the air.
I had grinding noise from rear left side wheel when turning right couple weeks ago. After replacing wheel hub bearing assembly, the noise is gone. But still remains the movement ONLY at 3 o'clock. I replaced stabilizer bar links in both rear sides. This link doesn't look like the reason of free-play (clicking movement).
Also, I tested (push or pull) after switching the other side(right) wheel, it still had clicking movement at 3 pm. Therefore, it is not a wheel problem itself, I guess.
And I took off the wheel and fasten the lug nuts onto the rotor itself (so, without wheel in this case), then push/pull the rotor at 3 pm, but this time no movement in any directions. @@;; weird.. ONLY, I can feel the clicking movement at 3pm on the Wheel (or tire) even after rotating wheel, exactly in same spot (3 pm) movement~!!!! What's this case??
All 4 wheels aligned recently after got new tires.
I scrutinized inside wheel while pushing/pulling back and forth. But I cannot figure out which one is problem.
1. Knuckle.
2. Lower control arm ( or Rear rear control arm, not typo) which has a Ball joint and a cam bolt the other side.
3. Rear front control arm
4. trailing arm.
5. stabilizer bar link. (new)
6. Wheel hub bearing assembly (new, double-checked the nuts and torques)
7. Rotor and pads (new, if I push the rotor itself then no wobble or clicking at all directions as desribed above)
Where should I direct my attention and/or what component(s) should I look at given the indications above?
When I pull/push the wheel at 3 o'clock, it feels like wiggling the whole part of lower knuckle where is the connection part between the part of 4 bolt (backside) of hub assembly and lower side of knuckle.
I heard that 12 and 6 is usually an indication of ball joint, and play 9 and 3 is usually in indication of steering components ( tie rods , steering shaft or rack itself ), and all around play is an indication of wheel bearing (usually accompanied with a growling noise ).
Ford Super Duty (1999-2016) :: Rubbing / Grinding Noise When Turning Left Or Right
My dually has started to make a rubbing or grinding noise just about every time I make a turn, left or right. What this could be, truck has 8500 miles on it.
SD Dually
Golf/GTI VI :: 2014 - Grinding Sound When Turning At Full Lock (left Or Right) In Slow Speed
So yet I found out about another common issue but not that publicized. This is the grinding sound when turning at full lock (left or right) in slow speed. I've read several people in the forum who has encountered this. I read different remedies but the most common one is to have the CV boots lubricated.
I have a 2014 Wolfsburg with almost 5k miles. I am really now worrying about my water pump crapping out on me but I heard this grinding sound yesterday.
Ford Super Duty (1999-2016) :: 2000 - When Turning Hard Left Only Makes Grinding Noise?
First off my trucks a 2000 v10 f250 with four-wheel drive and 2 wheel abs with about 230000 miles on it.
I Recently replaced my unit bearing on my drivers side because I thought it was the cause of a grinding that only happens on hard left turns but I wasnt the cause it was going bad causing play in the half shaft. I didnt seem to notice and wear on the shaft from bad needle bearings but I have to take it all apart again to be sure. Was just wondering what else could be the cause of this noise. I plan to pull the axel shaft and change all the seals.
Golf/GTI VI :: Grinding Noise At Full Turning Radius
2011 gti. I have about 5300 miles on it and it may be normal or have been doing this since it was new. I just noticed it today. When turning full radius in a parking lot I noticed that it sounded like the brakes were dragging. There is also a slight clicking noise. It does this both on left and right turns.
View 3 RepliesGolf IV R32 :: Grinding Noise While Making A Left Hand Turn
The other day I hit a good size bump at speed, slightly bent a wheel which I didn't even notice at first. The car drove straight and had no other symptoms, thought everything was okay. A couple days later I heard a weird grinding noise while making a left hand turn, it was so faint I honestly thought it was the fender liner. After the noises continued and further examination I noticed that the carrier is rubbing the rotor on the lower drivers side corner.
View 1 RepliesGolf V R32 :: Turning From P To Reverse Is Rough / Strange Grinding Noise
So with the temps on the east coast being sub 17 degrees, I noticed my car acting up on cold start and all the way until the car is at operating temp.
1 -- Going from P to Reverse is rough! I allow the car to "break free" sort of speak, before I actually give it gas in reverse and once I give it gas the car bucks violently a couple times and seems to not want to actually reverse... Issue is gone after driving the car and letting it warm up.
2 -- Again right after cold start and until operating temp - Shifting in either D mode or Paddle mode going from 1st to 2nd creates a strange "grinding" noise (I will try to get a video clip of it). The sound is very similar to that of a MK 4 starter beginning to go bad, but not as loud. It only ever happened going into 2nd gear from 1st gear. Once the car was up to operating temp and driven around the sound did not occur. Even after starting the car up again after letting it sit for an hour or two it was okay.
Both things occur on cold start up with the car sitting for roughly 8-10 hours.
Golf IV / Jetta IV :: 2001 - Makes Clicking Noise When Turning Left
Recently had this problem which started up about a week ago where my car would make this clicking noise whenever I turn left while driving. When I turn to the right there is no noise. Some said that it could be that CV joints need to be replaced. I have a video showing the side that is making the sound, maybe there is something abnormal that I don't see.
[URL]
Golf IV / Jetta IV :: 2004 GTI - Vibration And Loud Noise When Turning Left
So I have a 2004 gti that makes a very loud noise when i turn the wheel even slightly to the left there is also a vibration that shakes the whole right side of the car. I assumed based on the sound and vibration that it was the wheel bearing. the bearing was shot but when i replaced it nothing changed. so it has a brand new wheel bearing and the cv joint is good ive already checked it everything seems to be as it should. i cant think of anything else it could be. What the problem could be caused by?
View 11 RepliesGolf/GTI VII :: Squeaky Noise On Driver Side When Turning Left At Slow Speeds
Noticed my 5 week old MK7 GTI is making squeaky noises on the driver's side when turning left at slow speeds. What this could be? Occurs intermittently, not all the time. This is a leased vehicle, would this be covered by warranty?
View 7 RepliesSonata I45 (LF 2015+) :: Brake Grinding Sound When Turning Wheel To Left
When I move the wheel to the left, I get this metal grinding sound (similar to rust on brake rotors/worn down brake pads). It happens when the foot is off the brake and ONLY when the wheel is turned to the left.
View 1 RepliesBuick - Regal :: 2003 - Front Left Wheel Metal Grinding When Turning?
Car : 03 Buick Regal
Recent Repairs : Installed new brakes, rotors, and bearings a month ago
Problems/Symptoms:
1. When going forward grinding noise ONLY when turning wheel to the right, becomes a tad louder when applying brake.
2. When going reverse cannot turn at all without hearing an AWFUL grinding noise and the tire seizing up.
3. Front left rotor (where noise is coming from) is beginning to wear heavily on the upper-outside portion in a 2" band.
Possible Solution that I thought of:The metal brake pad clip is somehow bent/not installed right so it is grinding on the rotor.
Why Can't I Check Right Now : Do not have hydraulic jack currently to get my car up. Waiting until Friday.
Today, I took the car to the shop today and they actually found that my sway bar needs to be replaced, but unfortunately they did not open up the brakes to check out the grinding noise. So when I left, I got to thinking about the brake pad clip.
Ford Escape / Hybrid :: 2002 - Grinding Sound When Traveling Straight Or Turning Left
2002 XLT 3.0L 4X4
Making a grinding sound when traveling straight or turning left. Any turn to the right (even the camber of the passing lane) and there is no grinding sound so I figured it was the drivers side wheel bearing. Replaced it yesterday.... symptoms are still there.
Tight left/right turns don't result in the popping/snapping of a bad CV joint so I don't think that's it.
I don't think it's transmission related since shifting is good and the grinding is not throttle related. Besides, turning shouldn't have an effect on the sound if it was something in the transmission, right?
Passat (B7) :: Grinding Noise When Turning Right At Low Speeds
I have a 2013 Passat TDi SE with about 64000 miles on it and 20 rims. I noticed a grinding noise when turning right at low speeds. It was a very slight noise at first, but has gotten louder over the past 1-2 months. The grinding noise sounds like it's coming from the back of the car and only at fairly tight turning radii, with speeds 10 - 20 mph (think going up the levels of a parking garage). What could this be????
Other things to note:
No other noises, vibrations accompany the sound.
I do get the steering rack creek when turning lock-to-lock, but this sound is definitely not that sound.
I mentioned I have 20 wheels thinking that might have something to do with it. They don't rub at all going in a straight line, however.
Sound is only present when turning right.