Golf/GTI VI :: Water Inside The Housing Of Fog Lights
Sep 8, 2011
So it's been raining here a lot on the East Coast lately, especially in NJ and last night after getting out of work there were some few small floods I had to go through in order for me to get back home. This morning as I walked around my car to check if everything was OK I noticed that my fog's has water inside the housing. How do I go about drying them out or should I take it to the dealer and have them fix it for me.
View 17 Replies
Advertisement
Just bought a 2009 RX 350 in Bamboo Green.
I have an 09 2nd Gen RX with water in the fog light housing, the bulb has blown as well so there's shattered glass inside.
View 3 Replies
Long story short, over torqued the top two stretch bolts and destroyed the threads. We helicoil'ed both holes and put the bolts back in. That was about 4 months ago.
Today both bolts snapped not while moving. We dolly'd the car home and bought a replacement bracket, however all three bolts along the bottom that go into the transmission housing broke off inside.
I'm a tad stuck at this point. I could drill and tap new holes over the existing, but i question whether that is a good idea. My other thought was to get 3 of the larger stretch bolts that go in the top, completely drill out the three that are broken and tap the big ones in. This thought would also require drilling the bracket to make the larger bolts fit.
View 3 Replies
I went to push that bastard in yesterday (gently) and I felt something pop behind it - the button depressed, went crooked inside the cup holder housing and now won't "un-depress" and the cup holder won't "rise" back up. I've tried messing with it, but to no avail. Car's in for the 30K service, asked VW to take a look at it - I know its "only" a cup holder, so I'm not bent out of shape over this.
View 6 Replies
I was replacing the side marker lamp on the passenger side. It was super hard to get my hand in there to get it out! The problem is when I was trying to reinsert it, the bulb slipped out of the socket. I think it fell inside the housing. So it looks like I'm going to have remove the headlight housing to get it out.
View 13 Replies
2005 Toyota Sienna minivan. Neighbor brings it by my house for a headlamp bulb.Rt head lamp low beam is out. Access is easy with the hood open.Rt Headlamp lens housing has moisture inside, left does not.Bulb is not broken or shatterd, it is in one piece.Before we spend $76 for an HID bulb, I have questions on the HID system. Is it that simple..just a bulb..or is there electronic controls involved that could be the culprit?Did the moisture take out the bulb in the first place ? ( halogen bulbs explode when wet ) or cause a chort in the electronics ? I already told her we need to take out the lens body and find and seal the leak and dry it out but I'm curious about the HID system.Do I dare just put 12v to the bulb ( #D2R 35w ) to test it or is that a bad idea with HID ?....( my best Ford tech to ask is off today )
View 2 Replies
Maybe I've been having too much fun in the rain... I've recently noticed an odd smell in the car and found a small wet spot underneath the passenger front floor mat, only to be followed by same in the rear passenger floor mat. I was hoping it won't happen again, but I found myself with the wet floor few weeks later after the rain.
I first thought it may be the bike rack (which I have posted in the earlier month) but seeing the location and occurence, it couldn't be from the rack. It was always the underneath the center of the freaking floor mat.
My R is at the dealer since yesterday, getting a full physical.. They're even talking about removing the headliner to make sure there is no internal leak from the roof.
View 23 Replies
I had the OEM projector fogs installed today, as well as the rear fog and Euroswitch (will post pics soon!). I love the look of the lights off just as much as on - such a great mod! My only concern is that there is some kind of haze (almost like condensation, but not) on the inside of the driver's side housing. It doesn't appear to obstruct the light, but it is clearly visible when the fogs are on. What this might be?
View 2 Replies
My water pump housing is leaking. My 09 is well out of warranty but that's not really my question. I would like to know what you did when you replaced your water pump. did you upgrade to a metal impeller pump such as the GEBA brand?
View 6 Replies
My lights inside (not the dome lights but the dash, and speedo/tach lights) sometimes turn off randomly when driving, or sometimes don't even come on when i turn the switch. they eventually come on, or come back on after going out.
Also the display (that tells mpg avg. and what not) turned off yesterday too and hasn't come back on. that always stays on even when the other lights go out, but for some reason it shut off and has yet to return.
View 6 Replies
So I noticed when I check the oil, there is a very small amount of water at the end of the dipstick and also water mixing with oil around the oil cap. It is not much water at all, but my first thought was head gasket. I was loosing very small amounts of coolant, but found a small leak at the thermostat housing....The truck runs fine, idles fine, no bubbles coming from the radiator at startup, no moisture from exhaust. It seems to be using more oil than normal, but I drive it 100 miles a day still and no major issues other than the perplexing bit of water and oil mixing. Could it be a tiny head gasket leak? What else would cause the water and oil to come together.
View 13 Replies
2004 Jetta Turbo Auto ...
"I inadvertently had my foot on the brake and lights on for awhile when the car was not started. Ignition on. then when i went to start it, it made a clicking sound inside the car (not at the engine) and the lights on the dash flickered. during that time i was initially still able to turn on radio, turn on headlights, use power locks, etc so i don't think it was the battery (tried jumping it and it did not jump start). maybe it's the starter?
Starter had given no problem previously. Or is there an interlock or module that could be keeping it from cranking?
View 5 Replies
Experiencing water in the top of there tail lights? The dealer says this is normal. It's been like this for a week now.
View 24 Replies
I have a 2002 Subaru Outback. The rear right brake light housing cracked, and filled up with water, shorting the bulbs. I thought I was clever in taking the light unit off, draining the water, changing the bulbs, and caulking the crack with silicon. This worked for a while, then the battery died. I couldn't really figure out why - it was a year old, and had no prior issues starting the car. I swapped out the battery for a brand new one, and that seemed to solve the issue for a week. Then the car refused to start all over again. I remembered the brake light, checked it - filled again. So I replaced the unit and the pig electric line, and charge the battery. This seemed to solve the problem, but then the car failed to start after about 3 weeks.
One additional detail is the dial light switch on the driving shaft. One is able to turn this to adjust light settings. Regardless of position, the lights turn off when I turn off the car. However, failure to start seems to be additionally related to the position of this switch; if it's switched all the way back towards the driver the car appears to start consistently for weeks on end, BUT the tail lights fail to turn on in this position (though the brake lights work). Alternatively, dialing the switch all the way away from the driver turns on the tail lights, but seems to be related to battery drain.
I've checked the health of the battery and the contacts - everything checks out. At this point I'm wondering if it's an electrical fault or the alternator.
View 1 Replies
So I tried to replace my thermostat and housing and the housing bolt snapped off. Ok so I tried to extract that bolt off and the extractor bolt snapped off inside. I am guessing it might just be easiest to replace the water pump now? I am pretty much at the end of my mechanical rope which is short anyhow.
View 6 Replies
I have water in my Jetta's tail lights and its really annoying. I just had them both out on the weekend and checked out the foam gaskets and they were both fine but i replaced them with an older pair I had that looked in even better shape but basically the same condition...
Rained pretty hard last night and now there is like more water in them then before... I made sure I tightened them down good because they were not that tight when I originally took them off.
There is water condensation in my spare tire well and making my carpet wet and starting to fog up my rear windows..
View 17 Replies
I am in the process of replacing my water pump. After I removed the pump, I found quite a bit of metal-on-metal wear between the impeller and the water pump housing. Is this common?
I've been running a coolant filter on my system for years now, so hopefully its been effective at collecting some of the metal that has clearly been worn away. Either that, or this is a sign that the filter isn't working at all!
I'm a little worried that the new pump will scrape the scars left from the old pump.
View 9 Replies
Ok, I'm stumped... I've pulled the housing out for the 2nd row dome/reading light and I'm trying to replace the bulb...
How in the hell do you separate the trim from the housing to replace the freakin' bulb?
I've almost broken the thing in half trying to get access to the bulb... My FSM doesn't give any indication how to separate the housing just that the bulb needs replaced...
View 8 Replies
After my last car wash this happened and it's been like this a few days now, how to get rid of it. I can't really afford to drop $1000 on a new headlight. I've heard of the baking method but not sure I would trust myself to do that. Any tricks?
View 10 Replies
I have a v6 se 2013, and I just happen to see that there is some water drops inside my right fog light, I change my bulbs like a month ago, is that the reason? And if it is and I take it to the dealer would they avoid my warranty.
View 3 Replies
I noticed one of my tail lights has water inside, so there is some leak. I first noticed it after a touchless car wash.
How do I remove the tail light assembly so I can inspect it and dry out the water?
What's the best way to seal the hole (if there is one) causing the leak?
View 8 Replies
