Golf/GTI VI :: Seat Pulled Now Track Stuck - Fix?
Jul 12, 2012
I was installing the driver's side oem storage drawer and started by removing the 4 bolts that mount the rails to the car. While I was removing the seat rails, my outboard rail somehow slid all the way back and now seems "locked" into position. Basically, the inboard seat rail wants to slide when I lift the lever, however, the outboard seems to be caught and won't move. From the outboard rail perspective, the seat is all the way forward and will not shift back at all. How to deal with this? The pins that move down into the rail to hold the seat in place aren't what is holding it up. My guess is the edge of something in the track is catching.
View 4 Replies
Advertisement
My aunt somehow managed to drop coins that landed on/in the driver's seat track. How would I be able to remove the coins? Also, are there any electric wires I should know of before beginning the process?
View 2 Replies
1993 with 95,XXX miles. Driver's seat has developed a little looseness that allows it to rock just a little. Is there a reasonable fix?
View 3 Replies
I have an 06 Trailblazer with power seats. Moved the pass. seat up to fit something in the back. When went to put seat back into position it would not move back. The reclining function on the seat back is working. Is it unheard of for the seat motor to go bad or is it possibly just off track, or something?
View 2 Replies
Today I was on a highway traveling at 60 miles an hour. There were no cars in front or on either side and nothing on the road. My foot was on the accelerator and not on the brake. Suddenly the seat belts pulled very tight (I believe that is called "pre-tensioning") and the brakes slammed on without any input from me. The car rapidly decelerated to about 30 miles an hour. Fortunately there was nobody tailgating me. After that everything seemed OK. My vehicle is a 2013 Prius v (lowercase v for the Prius v wagon) model 5 which has the technology package.
I took the car to the dealer and they checked the collision avoidance system and said they could not find a problem. The service manager said he has a Camry and it has happened to him once. They had never heard of it happening on a Prius. Apparently Toyota has a bulletin about this for the Camry, but not the Prius. They suggested I turn off the Collision Avoidance System with a switch that is under the dash.
I am not sure whether to turn it off because if I do I lose the adaptive cruise control and collision avoidance, If I leave it on this can happen again possibly causing an accident.
View 19 Replies
My power seat is stuck in the all-the-way-forward position. Seat has power to tilt and move up/down but will not move/slide back and forth. I am guessing there is a power cable that popped out when the seat was moved all the way forward.
2000 Jetta VR6
View 6 Replies
When I went to pull my key out of the ignition yesterday the key got a bit stuck and when I jiggled it a little to pull it out the chrome bezel that locks the tumbler in fell out. Now the tumbler is out as well and I cant figure out how to get the tumbler in and lock the bezel in place.
I see a pin on the bottom of the ignition cylinder that I should be able to push in and pull the cylinder out but I cant seem to push the pin in at all.
View 3 Replies
2005 Jetta, passenger side window has been falling out of it's track for the past several months. Sometimes a pothole bump is enough to drop it into the door, and if I roll it up all the way, it is unable to be rolled down again unless I squeeze both sides of the window and realign it. if I leave it even a cm less than fully up, it stays on track somehow...
I've read that this is semi-common in Jetta's of this year, and that it's due to a "window clip" that made out of some cheap plastic snapping. I've called pep boy's and NAPA auto parts near me (MA) and both said they don't carry that sort of thing and I need to go to a dealer. The dealers tell me that they won't sell the plastic piece alone, and that I must basically buy the full new module (glass, track, clips, and all the other stuff that I don't need).
Where I might be able to get only the cheap plastic piece by itself, or how I can fix the problem without spending hundreds on a entirely new system?
View 5 Replies
I need a way to make my both fans be on constant during track days, I know induction makes a fan kit for the mk4 r32 which works great but the controller in the MK5 is different and the kit don't fit.
View 8 Replies
So my engine light came on today while I was out so when I got home I plugged in my OBD2 reader and it gave me a P0441 code which in my Haynes manual says "Evaporative emission control system- incorrect purge flow." Before I got my scanner, I had the engine light come on and I took it to VW. It was the same thing last time. I couldn't quite understand the poor explanation given from the VW guy and so now that that code ran again.
View 2 Replies
Pulled into my driveway one night and a get a AFS failure.
Lights work, everything functions correctly, except my headlights don't level. I've seen some threads refer to it as the "dance".
I have the light out warning on the dash and every time i start my car it says "AFS FAILURE" or something across those lines.
I replaced my headlight level sensor and made sure the level sensor is pointing the correct way (toward the driver side) and that didn't fix it.
My car is lowered, but this issue didn't happen until recently. I do also have Euro Headlights, these were installed months ago. Way before this issue came up aswell.
View 3 Replies
I threw a code and I have it but I am unsure what to do.
The code is P0353
"Ignition Coil C Primary/Secondary Circuit"
I saw that this might be the coil, the wiring or the ground? I had my coils go on my 1.8t Jetta and that was pretty distinct as the car ran like crap.
The car seems to run fine, I have had the code for 2 days. It went off this morning and it came on again this afternoon.
View 3 Replies
Any easy way to get the inner fender back into shape evenly without having to get someone to roll it? Yes my car does have the screw mod, and my wheel fitment is not super extreme. I'm on ST's that are maxed out. This is my first vdub...
View 17 Replies
I have a 2005 Jetta 2.0 BEV GLS. I got a code P0302 for misfire on cylinder 2. I am pretty sure it's the Ignition coil. I live in Canada and my autoparts store only has BWD brand. I have read this is a crappy brand.
View 1 Replies
So I was getting p0420 and p0430. I installed new hi flow cats on and did coil pack 1 & 3 since I was getting misfires there. Erased the codes after all the installs and they stayed off. It's been a little over a month later since the installs and my CEL came back on, scanned it and I'm getting same 2 codes again
View 10 Replies
The Electronic Power Control light in my 1999.5 Jetta GLS VR6 came on a day or two ago. Now it hesitates like crazy even after I've already pulled out and am trying to accelerate. Is there any common problem/malfunction that would cause the light to come on, and is there any correlation between the light and this symptom? Also, the check engine light came on.
View 24 Replies
I have a Jetta Mk IV, yesterday I went to go drive it and just as I pulled out of the driveway it started running rough, so I pulled back in the driveway and the coolant temperature sensor light came on, then the check engine light. and then it died. Then today I tried starting it, and it will only start and run if I have the gas pedal all the way to the floor, and it runs really rough. Then it will die. I thought maybe the coolant temp sensor since the light came on. I replaced that, and it still does it. I'm leaning towards a head gasket.
View 2 Replies
The passenger side 3rd row seat is stuck in the down position. The driver side lifted and locked in place just fine, but when I pull the release lever on the passenger side the outer part releases but center portion won't budge at all.
I've tried everything I can, which isn't much other than pulling and grunting at the same time (usually works for me )Critical because I need to set the 3rd row up in order to reach the bolt holding the 2nd row seat so they can be removed so I can access the fuel covers in order to replace the faulty fuel sensors so my gas gauge will work.
View 13 Replies
The larger (60) side of my 2005 Sienna's third row seat is stuck in the "up" position. That is: the seat back will fold down, but the seat will not release from the floor in order to fold down into the well at the back of the vehicle.
The pull tab on the back of the seat that releases it moves in and out too easily. I viewed the mechanism under the seat and it appears that the pull tab is linked to a cable which rotates an armature, which in turn pulls one cable for each leg of the seat to release it. It looks like the cable connected to the pull tab is properly rotating the armature, but the legs aren't releasing. I can't tell for sure but it seems like the armature is rotated into the "release" position but it hasn't released the legs. I've crawled under the seat and tried my best to rotate the armature with my hands and a pair of pliers to no avail.
I was thinking my next step would be to try to rotate the armature with a little gentle persuasion (e.g. a hammer and a screwdriver or piece of wood).
View 5 Replies
Need to locate the fuse for the power seats in an 07 Toyota Avalon. The seat has been stuck in an uncomfortable position for a while. Id like to check the fuse before removing the entire seat to look at the motor. Dealer wants $200 for this info.
View 1 Replies
I love my SC430, and want to keep it another ten years! BUT... I reclined the passenger seat this weekend, and now it won't go back up. Using the release lever, I can pull it up, but if you sit there or put any pressure on it, it falls right back down again to full reclining position.
View 4 Replies
