My RNS 315 doesn't show much street detail in the Navigation mode. It just identifies the road or highway and occassionally a side street or two. It doesn't show the names for all the streets and roads. Am I overlooking a setting which would make all that detail appear in the Nav display? Maybe I need to check with my dealer to get it configured right?
View 4 RepliesI have a 2004 touareg with the 2005 disks & I am wondering how to get all the street names to show up? I am assuming it must be some setting that its on because right now I only get the major highways & interstate names. All the misc neighborhood roads etc. show up but the name of the street does not.
View 6 RepliesI noticed that the map on the NAV does not show all the street names. It seems to display all the streets but names for only about 1/3 of the streets. Sometimes even major roads don't have labels. Is there a way to get all the street names to display? I've tried playing around with the settings but can't seem to find anything that will display more street names.
View 11 RepliesMy '05 (DVD) NAV only shows major highway routes - it doesn't show any of the local street names when I zoom in (other than showing the current street name on the MFI - it does do that). But I would expect to be able to see the names of every street appearing on the map display when I zoom in. (My friend's '03 Lexus supposedly can do this.)
I went through each Map Content selection. None of them offer me the ability to enable street names for the streets appearing on the MAP display.
The "car" symbol on the nav screen seems to lag the actual position by up to 1/2 block.... when I make turns onto another street, for example, the map will sometimes indicate that I am turning into the block itself (instead of the street that I am on), and about 1/4 mile later, it will mysteriously "shift" the car location back onto the correct street.
View 24 RepliesHow do I set my navigation so when I am traveling over my speed limit it will show the current speed limit of the road or highway.
I use to use a after market gps years ago that would automatically show the speed limit of each road or highway I am on if I was passing the limit.
I have 2010 prius III with JBL E7022 navigation. I dont know why i cant get the IPA system when i put the shift to "R" and the Auto Parking Assist pre support selection button right side the steering wheel is blank.
View 6 RepliesIn my C3's navigation system there's the option to set the map display to day or night mode. I have it set to automatic but it doesn't seem to ever switch to night mode on its own. How is night mode triggered?
View 5 RepliesThis is the first snowy winter that my car is going through. Often times, especially when parking alongside the street, my car gets stuck. So I usually try the reverse and forward motions couple times and most of the times I'm able to get out of the snow. But while doing so, sometimes the engine reaches high rpm because of no traction. And when i get stuck a lot i usually have to do this a few times to get unstuck.
Today for the first time, after a terrible 20 minutes of trying to leave my works parking lot, some errors came up on the screen for just a bit. The brake error system, airbag system, tire sensor flashing, steering wheel symbol, and i think one other error but just do not remember which. About a min or 2 after that i got out of the parking lot on a regular road with less snow and while parked at the light all the error symbols went away besides the airbag one, which eventually went out when i got home.
What might have caused it or if its a serious issue or not. And also, is getting the engine to high rpms when trying to get unstuck in snow piles bad or does it eventually mess it up? Just getting tired of this snow.
How to bypass the safe mode feature of the navigation unit? I've found bypass modules on the internet that go for around 200 but was wondering if there's an alternative method that would possibly be DIY and very low cost?
View 2 RepliesI am enjoying my new (pre-owned) 2010 Gen III prius and it has been a pleasure so far. My only whine is that the navigation map mode is always in 'North up'' and 2D mode.
In this day and age of the GPS/MAPS world I suppose it wouldnt be too much to ask for a 3D view of the map and default 'driving direction up' mode? Also can the daylight mode be selected even at night or when the headlights are turned ON?
I had my navigation system reboot yesterday and since then, when the headlights go on, the navigation screen dims rather than stay in daytime mode (brighter). How to keep the navigation screen on daytime when headlights go on?
View 6 RepliesI have ES 350 2016 with navigation. When you start a car, the screen always defaults to navigation mode. You must press HOME button to get home screen. Is there any way to change the default, so it always starts with the home screen ?
View 14 RepliesI recently purchased a 2012 Lexus LS 460. I looked everywhere for an answer, but can not find one. On the navigation screen, the compass can point north or in a 'heads up' position. Most people, as you know, like the heads up (moving icon always points north). However, in this 'heads up' mode, the compass does not seem to indicate what direction I am moving. The compass does change when the car changes direction, but it does not correctly show the direction the vehicle is moving. For example, if I am driving true NORTH, the compass will show NORTH. If I then start to turn righ (moving from NORTH to NORTH-EAST), the compass actually starts to move and show NORTH-WEST. So, when the compass is in 'always north' position, the icon on the navigation screen correct shows the direction the car is moving. But, when the compass is in 'heads up' position...how can I tell what directing the car is moving?
View 14 RepliesRight now it doesn't chance background shade when at night time, it always stays white.
How to change so that it automatically changes to black when in night time ?
Feel resistance going from neutral to 1st sometimes (and 4th to 5th or reverse)?
It doesn't happen all the time, but it doesn't feel very smooth. It feels like something is rubbing against the stick. When I reset to neutral and try it again, its smooth as butter.
Inserted updated nav disc as directed in nav disc slot, closed door. Now the disc is stuck in the scan-disc mode and the load/eject button doesn't work on it. Wondering if there is a way to force eject the disc or other way to unstick it. You can hear the disc 'whirring' briefly as if it is trying to eject, but is stuck. It does this over and over. That's the only sound; none of the other buttons are responsive.
View 1 RepliesSo I found a guy selling an OEM Part # 86100-06040 navigation for cheap. Is it as simple as plug and play for switching it out on my 2013 Non Navigation Carmy Hybrid? Does all the steering wheel controls are there?
View 13 RepliesWhile traveling down a city street, our 04 Passat TDI stalled out, and when restarted it made a whining noise in the front end. We had about a 39 mile drive home from there. The local VW dealership of course said since the service desk was closed, said leave the car. We drove it home. I raised it up on jacks and I noticed the underside was wet from a dark in color liquid (oil)? I traced it all back to some CV Boots on the outer sides. The drivers side was all greased up green in color and rubber chunks were chewed up all over thru the wheel well. The pass side, had a nice crack in the outer side as well, but the liquid (oily) compound appeared to be coming from the inner side of the boot. What does it usually take to fix something like this, price? I don't think that i will attempt this headache.
View 4 RepliesJust recently did the RCD 310 to RNS 315 swap. Everything was fine while I waited for the aftermarket navigation antenna...
Got the antenna in last week, installed it and the navigation works like a charm. Only issue now is when I drive for 20-25 minutes the head unit will shut off and start back up. It does it when I use navigation, ipod or even radio. Do you need and VCDS coding?
I have a cherokee that has never given me any problems...at all, ever. The car started fine drove down the street and died like it had run out of gas. Immediately the voltage gauge read about 10 volts. the car would not start or jump start. took the battery out that night and at oreilly the battery was good, just slightly discharged. was towed to a shop. they had it 2 days and felt there was no power getting to the fuel pump. Had it towed today to the nearest jeep dealer they said my crank position sensor wasn't working, but the car wouldn't start. then they said my neutral safety switch was also bad. switched it out and it starts. all in all they want almost $500 to fix the car. i can't believe both those parts went bad at exactly the same time. Is this possible?
View 13 Replies