Golf/GTI VI :: Popping / Knocking Noise When Turning At Low Speeds (0 - 10mp) Only
Apr 1, 2012
I recently started hearing a pop/knocking noise when I'm turning at low speeds (0-10mp) only. I've already done a search but most of what I found dealt with installing new springs and/or coilovers. The thing is, I only started hearing it a day or two after I installed my rear sway bar. I've gone under a couple if times to readjust the sway and put it back on thinking I might have torqued it too tight or too loose. After I did that, the noise would go away for about a few days but then it comes back again?
View 1 Replies
Advertisement
More times than not now, when making a sharp left turn and sometimes a left turn in general, a loud popping/clanking/knocking noise comes from the rear of my truck. I can feel it in the steering when it's about to do it. The steering wheel will become stiff when turning left and when I straighten up it will pull to the right (just got the truck aligned so I don't think that's a problem). Rear left tire will spin like its struggling to spin. After all that I can make a hard turn right and "pop" everything will seem to go back to normal. 1999 Silverado Z71 5.3l ....
View 5 Replies
2001 vr6 manual... I have a popping noise that comes from my suspension. it is in the front, and it has gradually gotten worse over the last month or so. It used to happen when i back out of my drive way only, but now it happens when accelerating from a stop, quickly braking or turning at low speeds. Recently its getting worse and i can start to feel it in my steering wheel sometimes. It doesn't feel like a wheel bearing. Is it bushings? Tie rod? CV Joints? Strut Mount?
View 2 Replies
For the last few thousand miles my 99.5 jetta has been making a popping noise (many pops, not just one) only when turning right under acceleration. (No noise when coasting or decelerating in gear and turning right, no noise under any circumstances). no pulsing in the brakes, and the car appears aligned well as it tracks nicely.
The noise is rotational, the faster you go, the faster the pops happen (again, it will make many popping noises, not just one). Probably once per revolution on the tires, not entirely sure. And it is, with as much certainty as i can have, coming from the front passenger side of the car.
I took it into the mechanic twice, first time they couldn't hear it and sent it back. Second time they said it was likely the CV joint so replaced both on the passenger side.
I have to admit that I didnt notice the noise for about 300 miled after that service, and I did try to get it ot happen. but its back now.
All boots and ball joints look ok and no grease has slung out. I am thinking it might be a wheel bearing at the extremely early stages of going.
Right now i am on a "wait and see if it gets worse " course. For the last 1500 or so miles it has not seemed to have changed.
View 7 Replies
OK, when I first got the car in June it needed strut mounts so I got the 034's and new bearings and all was good, recently I noticed just a creaking/knocking type noise, not the same as before. So I checked the bolts on the mounts just in case and they are good. Been reading lately about the subframe and it is leading me to believe that may be it. The noise is more noticeable at slower speeds when just going over slight road imperfections(like small dips) and sometimes I do not hear it at all even over rough roads?
View 6 Replies
Recently when I was on a longer distance drive (multiple hours) my car was producing an unusual vibration. It seemed to go away after some time. At the end of my drive I was turning left around a bend and there was knocking sound. One of the boots on the cv joint has been leaking grease so I went ahead and replaced both cv axels.
The knocking is still there. Here are the symptoms:
- Knocking sound when turning left when the accelerator is down.
- Knocking sound is somewhat intermittent when turning, not always continuous.
- The vibration is not always there and is only there at higher speeds, and is made worse when accelerating.
- All of this appears to get worse the longer the car is driven (heat?).
View 3 Replies
Noticed my 5 week old MK7 GTI is making squeaky noises on the driver's side when turning left at slow speeds. What this could be? Occurs intermittently, not all the time. This is a leased vehicle, would this be covered by warranty?
View 7 Replies
My 2003 CRV has developed a "popping" or "knocking" noise that seems to come from the front end of the car. It doesn't happen all the time but seems to happen more and more. I've read it could be either a sway bar of CV joint issue? I've taken it to our Honda service center and they have checked it over and can't find anything wrong.
View 7 Replies
I just bought a 09 Corolla S a month ago. In the last few days I've been hearing a popping/knocking noise while I'm driving. It sounds like it is coming from one of the wheels but which one. It usually happens once I decelerate or driving at low speeds. If I brake the noise will stop. The rhythm of the noise doesn't seem to be consistent with speed I'm driving. It happens more often on bumpy roads but it still happens on smooth roads. I'm wondering what are the possible problems that are could cause this?
I don't know if this would relate to the sounds I mentioned but when I bought this car it had brake problems. It would grind pretty loud. The dealership ended up replacing new rear drums. So when I drove it home everything sounded good for about a week. The grinding noise came back and after I sprayed some brake cleaner it went away for a few days. I'm assuming thats what the dealership did to hide the noise. I went ahead and changed the front pads and that worked for a week or so...but the grinding noise is back. I was about to change my rotors this weekend when the popping/knocking sound I mentioned above started happening.
View 5 Replies
When stationary and turning the wheel to the right, I get a popping noise coming from the front right suspension. It is not the subframe bolts or the endlinks (those were disconnected for testing). Car has been on Ohlins coilovers for 2 years and this just started. I've replaced the top mounts and the bearings. Tried Audi TT too mounts and new bearings again. No luck. If I loosen the strut mount bolt, problem goes away.
But obviously can't drive like that. Lifted the car on the right side so that the suspension was about half way compressed, turned the wheel and no noise. So it seems what is happening is that the metal insert in the top mount wants to move slightly, but it will only move so far. When the suspension is compressed, it sticks and then "pops" back into position. None of this makes sense as that part of the mount is not supposed to move and I have new bearings too.
I thought of placing some lube in the bottom of the strut mount where the metal insert comes in contact with the rubber of the mount.
View 2 Replies
Phaeton w12 ... I put new inner and outter tie rods on and new dust boots (the accordion style ones).
I am getting popping noises when I turn from the boot. It's been going on for a couple months now. I tried swapping left to right, greasing them etc nothing works ...
View 3 Replies
On my xl-7 upon turning left it makes a poppping noise, its real bad at complete stops,its almost like a cv axle noise. Ive taken it to the dealer at least 8 times and they replaced struts , but it still makes this noise.I also called the main Suzuki customer office and complained. They told me its just one of the characteristics of the new Xl7.
View 4 Replies
I am a owner of a 2012 Toyota Camry LE with 18,000 miles on it. I am having a issue when I go over any bumps, or turning, I hear a popping noise coming from the right rear.
View 4 Replies
So i just got my car back from the dealership today. they claimed my poping/clicking noise was due to my oil catch not being secure. so they secured it for me and it doesn't move at all now and I still hear the popping/clicking noise when slowing down or speeding up abruptly and when backing out of parking spots.
I have torqued all the subframe bolts and done the subframe washer and also retorqued all the suspension bolts for the struts and the strut mounts and bearings are brand new. It almost sounds like a cv joint or some sort of ball joint popping. They said they checked the cv joint and there is no play and looks fine .
It also quiets down when its wet out but when its hot and dry its very loud and bystanders can hear the noise.
View 6 Replies
Got the stabilizer bar recall done in February and have been on a couple of long trips since then. No real issues until about a week ago I noticed at low speed, when turning left, and usually if there was a small bump or incline........like turning into my driveway, there would be a popping/grinding sound. It could happen at speed, but never heard anything. I go last night to install some ECS cross drilled and slotted rotors and flush spacer kit and noticed this on the left front....
Well honestly I noticed first that I needed to wash my car, just got back from the beach and it has been raining here, but is this installed correctly. The bar is bent near the top, easier to see in person and I am fairly positive this is not correct. Called the dealership and they are going to check it out Monda. The picture below is of a left front on a MK7 and it appears to be the correct.
View 9 Replies
I've owned my 14.5 camry se 4 cyl since may and a few weeks into owning it i noticed a pop/clunk coming from the front passenger side while reversing and turning the wheel. So, finally got some free time to take it into the dealer today and dropped it off. Also, when letting off the brakes you can hear like a creaking noise, almost like the brakes are metal to metal but it only happens LETTING OFF the brakes?
My service advisor says supposedly the "creaking" noise when letting off the brakes is normal. I told him i really don't believe that lol and asked to test drive another new camry on the lot which is being arranged for tomorrow. In the meantime he says they're gonna look at it either way.
View 4 Replies
ok I have a 07 civic with 80k, which I bought used, it seems when i turn the wheel more so to the left at slow speeds like parking or pulling out etc I hear a popping and or clicking noise from the front end it doesnt always happen, but happens enough I took it to my dealer to have everthing checked before a rd trip they told me the boots and all are fine but the joins could be binding, but that its safe to drive and doesnt need to be replaced.
View 7 Replies
Hear a small pop in the cab when I am turning left pulled left wheel everything looks fine. Ball mount maybe, I don't want to tear into it at this point.
View 5 Replies
Have a 2010 Corolla, 42k miles, from a dead stop, turn left under power with wheel about 90% of one full turn, get a clunking popping clicking noise from the front end -- I cannot tell if from the left or right side -- I've been in the back seat too, and cannot determine if the noise is coming from the left or right side up front. I've had the car since 34k miles, has been making this sound ever since, not sure if its gotten worse, if it has, maybe just a little.
No noise if turning while NOT under power (coasting). No noise if turning to the right. No noise while driving in a straight line or veering left at a higher speed. Also, I tried to recreate this noise from a dead stop, turning going in reverse, both left and right, and no noise ever.
If in a parking lot, from a dead start, turn wheel left almost one full turn, accelerating slowly I can get the car to make this sound continuously (until I start going too fast beyond my comfort zone).
Have looked under car jacked up several times, nothing obvious. CV axles have minimal play and the boots are in great shape. Suspension parts appear ok.
My gut tells me could be a CV axle, but not certain, and I don't know which side..... something else that could cause this ?
View 5 Replies
Okay I have a 2006 Hyundai Elantra with 56,000 miles. Whenever I have been driving for a while in town and and the car is heated up, I get a clicking/popping noise coming from the front end whenever I reverse, turn the wheel, and then brake.
I've been testing it more but it won't always click or pop when i turn the wheel, but when I push the pedal down to stop it clicks and pops a lot. And then as I turn the wheel back without being on the brake pedal it'll click a little bit more.
Normally this would sound like a suspension problem but the fact that I have to push the pedal down to "activate" the sound has me baffled. And the weird thing is, is sometimes when I'm turning into a parking spot at low speeds it will click just a little bit..
It almost feels like the brake lines are getting tangled up and making sounds. I know that's not the case but I'm trying to describe the sound. It's not the normal pop you would get when a tie rod is going out. It doesn't really sound like its metal on metal. And it doesn't constantly click while reversing or turning like it would if it were the CV axle.
The car stops just fine though.. I'd even say the brakes are pretty touchy. The other issue I have with brake sounds is coming from the back. When I'm slowing down ... at around 15 mph it will click in the back every rotation. It has to be coming from the drum brakes. That doesn't concern me so much as it probably is time for new pads or something in the hardware needs tweaking.
View 15 Replies
I have an 08 F-150 5.4. When sitting still or moving, and turning the steering wheel to the right and only the right past center, there is a popping type noise somewhat like a screw driver down a washboard (for those who'll know what that is). I replaced the ball joints because I saw a slight amount of play, but the noise is still there.
View 12 Replies
