So I jacked up my car on stands to put in my dogbone mount insert yesterday, and my friend noticed this hole on the bottom of my transmission:
He said if you look inside you can see gears and (his words) "They look pretty dry". Is this just an inspection hole? I imagine if there was some kind of catastrophic fluid loss my transmission would shift weirdly/not at all. But so far it seems pretty normal. Its a MT btw.
We just purchased a used 2007 Elantra sedan. Noticed it was out of washer fluid when we got home. Went to fill it and as I was pouring in the washer fluid, I could hear it running onto garage floor.
When I looked underneath, I see there is a hole, 1 1/4" in diameter in the bottom of the tank. Obviously something was supposed to go in that hole. Low fluid sensor perhaps...even though I don't have a warning light indicator on my dash. The owners manual indicates that this light indicator on certain models where equipped.
Since my model is not equipped with this feature, is there a rubber plug or grommet that should plug up this hole?
I am having trouble finding an oil leak on my truck. the oil is coming out of the weep hole on the bottom of the bell housing where the cover over the torque converter is. There is no oil in the front of the valley under the fuel bowl/hpop. But there is a small puddle in the rear of the valley. I have changed all the turbo pedestal orings. Maybe the ebpv rod? But i cant see it leaking from there so im not sure where its coming from. Also have to do the front main as is leaks a little onto my lower radiator hose. How difficult are those?
View 7 RepliesI have a 2010 Santa Fe V6. The transmission fluid filler cap is too close to a housing unit that a wrench or a socket won't fit around it but I also noticed another plastic cap that is connected to it and was wondering it that was for (is this where you fill in the oil? seems too small). I've attached a picture and would love to hear what you think. The filler cap is at the bottom and the plastic cap is on the top.
View 12 RepliesI've looked at [URL] at the three primary hitch receivers for the 2013 RX 350; Curt, Hidden, Draw-tite.
From the side profile picture which etrailer displays for each, the Curt has one hole and the other two have two. Those two appear to be different sizes. The one on the Curt seems to appear smaller than the larger of the other two holes on the other two hitch receivers.
I called etrailer and the person I spoke with could not tell me why they were different, they just read the specs I see on the page, tongue weight, load, blah, blah.
With my hitch, I will need to haul a Yakima trailer, about 450 Ibs total, it is a very lightweight trailer, or a 2" Yakima bike rack. Maybe some day, I'll need to haul something of substance, but I have no plans.
I'm also wondering if a hitch which is recessed back, will it be difficult to work the pin in and out?
2000 honda accord automatic, 4 cylinder. As I unscrew the drain plug of the transmission, i stripped about 2/3 of the hole threads. the bolt threads are OK. what are my choices to fix it? i do not believe there is room to "tap and die" (?). I visited locan NAPA and they suggested me using 2 liquid epoxy. what i am thinking to do first is to use the liquid gasket surrounding my bolt, bolt them in using the remaining 1/3 of the hole thread. Let is sit and cured. it will work?
View 8 RepliesI have a 2007 Ford Explorer Sport Trac v-6. This truck has been the bane of my existence since I bought it back in September, but I finally fixed all of the issues I was having and it's been great. But, today I discovered that during the most recent work, the transmission cooler line ( Ford part # 7L2Z7890A) was left unsecured against the tensioner pulley. Needless to say, today a hole appeared that gushed tranny fluid everywhere.
I have two questions please- First, need to find the hose diameter so I can do a quick fix insert long enough to drive 1 hr. home? Second, I read online that there is a fluid fill point on the passenger side of the transmission case, is this correct and do I need to be aware of anything else to add enough fluid to safely drive the 80 miles home?
I haven't lost enough fluid that my driving is becoming sluggish and hesitant, but I can tell it is very low.
Last spring my 2004 Camry, 3.3L with only about 115,000 KM (71,500 miles) started losing Transmission Oil. The lost of oil was very minor but I still had to keep an eye on it.
Last summer, I took the vehicle to a Toyota Dealership and they found the problem. It seems that corrosion created a small hole it the transmission case. just behind the driver's side wheel. The Service Tech was very nice and shared that in all of his years working at Toyota, (about 20 years) he had never witness this and none of the other mechanics had seen this as well. He indicated that my choices were simple, change the transmission or try and repair the hole with J-B Weld type of cold weld product (not sure if they used the J-B Weld product). I of course decided to use the cold weld product as per the mechanic's recommendation.
Well, last fall, the leak started again and it leak all through this past winter. The vehicle now has about 130,000 KM (90,000 miles). Besides this problem, the vehicle is in good shape and still runs very well. The funny thing is that the vehicle had a corrosion product sprayed on the vehicle soon after it was purchased.
Link to photos : [URL]............
After driving, i smelled something horrible burning. When I get home, I get on my creeper and roll under to look for anything suspicious, and I find this. It is not where the drain plug in the pan is, it's in front of that. I checked the temp when I was driving but it never got high. I really need my transmission to not explode on me right now, I have a lot of driving to do.
Here's a gallery where there are some pictures....
Photo Album - Imgur....
I have a 2002 F250 SD 4x4 w/5.4. I drained the front differential gear lube and refilled with 2 qts of gear lube as specified in my owners manual. Actually the manual says 1.8l / 3.8 pts. The fluid level is not up to the fill hole and if I stick my little finger in the hole I can barely get any on the tip of my finger. The owners manual says these capacities are for F250/350 w/ Dana 50 axle. It then says F350/450/550 capacity as 2.7l / 5.8 pts with a Dana 60 axle. My question is should the fluid level be up to the fill hole, as with the transfer case and rear end levels? Could I have a Dana 60 with the higher gear oil capacity in my F250? Whats the proper gear oil level?
View 4 RepliesI just had my tork converter and flex plate replaced on my 2002 Explorer XLT, it has the v8 with 5 speed auto trans. My question is this : on the bottom of the bell housing under the tork converter is a round hole aprox 1 1/2 or 2 inches in diameter. Should there be a plug or cover of some sore to keed dirt and debri from getting in ?
View 4 RepliesMy 63 year old mom owns a 2004 VW R32 and she must had hit a speed bump or something too fast. It now has a nice pin hole in the pan. I have found multiple listings on ones online, but want to order the right one. I am looking at this pan here. Is this the correct pan?
Also does it have a gasket or use RTV? Are there any other parts needed?
The swap looks pretty straight forward any tips or tricks. Gonna do it in my driveway.
I opened my hood 6 days ago to look at a possible cel issue throwing code P000A, ever thing was fine. Today I opened my hood for another reason and found my CAI had a hole in it. The pylon that has the screw that mounts to the engine tore out. No large part flew into the turbo
View 24 RepliesSo this is my major problem, leaving for a camping trip tomorrow afternoon. It's just 15 miles away, easy flat drive. What has happened is the trans line coming out of the bottom of radiator is leaking next to the fitting about an 1/8 ' out, So I can't cut off and splice in hose for the trip. I worked on it for about an hour, rusted on, tried some heat and now have some PB Blast on it and all I am doing is starting to round off the head of fitting. Is there any way to bypass this just to get the camper to campground and then get to a shop while we are gone Don't care if I have to splice and cut, will get new lines later.
2004 f250SD 5.4 83000miles
I've been having transmission fluid leak from my truck for a while now. Very slow leak. At first I thought it was a hard line and replaced it but it was still leaking. Then I think I found where it was coming from. It looks to be fluid dripping on the bottom of both sides of my intercooler? On both identical spots. I am guessing perhaps I had a crack on my transmission oil cooler and driving blew it into the fins of my intercooler. I took my old one off and couldn't visibly see one. I have a brand new trans cooler installed now. Haven't drove yet as I am waiting on brake parts? I couldn't think of anything else on why it would leak off the intercooler?
View 6 RepliesDon't drive my R every day these days. Recently had to get it out and get it smogged when I noticed there is no AC. Turns out the aluminum AC line next to the radiator clip on the passenger side has a hole in it. It has been vibrating against a screw head which finally drilled a hole through the line.
I heard the "ticking in the dashboard" sound.
I currently have a MKIV Golf. The other day i was out and about and i was going through an intersection. It had some deep gutters, or divets, whatever you want to call them to allow water to flow through the intersection. I didn't notice how deep they were until i hit them, being it was night and I didn't think going the speed limit i would even need to worry about that at a busy intersection. Anyways, i hit it, heard it, felt it. Didn't think of it much since it didn't seem that hard of a scrape. Got some food and ended up driving for another ten min.
My oil light came on and i ended up driving a block or 2 to the gas station. I stalled out on the highway right before i got to the gas station and had to try popping my clutch to make it into the parking lot as it was a busy highway. It restarted and i got into the parking lot fine. immediately turned off the engine. After half an hour and multiple dry dipstick checks and 3 quarts of oil on the floor i ended up finding out that there was a bullet size hole in my oil pan.
The only thing is that the fact the engine sounded horrible, but didn't seize up, and i don't know how long the engine was completely dry, should i take it to a shop so that there isn't a possibility that damage has been done to the engine? or should me replacing the oil pan, adding the proper oil and amount be sufficient for the engine to run fine. I don't want to take the chance as I've already been through engine problems with an s13 i had that seized up on me because of other oil issues.
I was driving to work last night and too many things went wrong simultaneously leaving my MK4 stranded.
2000 Jetta 2.0
185,000
Automatic
No check engine lights or warnings
-The engine sounded like there was a hole in the exhaust at highway speed. There wasn't because it's a new system
-Low coolant light came on. The flange connector at the firewall was torn off resulting in a stream of coolant pouring out
-It was dark but the engine almost seemed cockeyed by a degree or two
-Upon parking, the motor. sounded "clunky". Driving forward seemed OK. When shifting into reverse there was a pronounced clunk and the drivetrain wasn't happy.
-I turned the ignition off and that was the last time the car started. It turns over now but will not fire up. The video I attached is my last attempt at starting it before giving up.
My car is my job and I'm at a total loss on how to proceed???
I have an appradio 3, with the dash kit, and it has two clips on the top to hold the deck into place, but there aren't any clips on the bottom. So because of that, the bottom of my deck always pushes out.
View 1 RepliesGot my car over the weekend and didn't drive until today as I was waiting for the insurance paperwork to clear. Opened my door this morning to find a nice stream of water coming out of a hole (drainage?) at the bottom of the door. It was a good amount of water that came out, and I could hear water in the door when I closed the door.
Opened all the other 3 doors and had a nice puddles of water next to each door. It was raining here Monday and Tuesday. Is there supposed to be that much water just sitting in the car after a rain? I feel like I've never seen that much water come out of a car's cervices a day after rain.
VIDEO : [URL] .....
My 2000 Jetta 2.0 has a coolant leak. I searched and found a lot of mentions of the flange on the driver's side, and I have coolant dripping from the bottom of the car in a location that seems consistent with that, but I felt all around the flange and the hoses that are connected to it and it feels dry.
Where else could it be coming from? (yeah, I could jack it up climb under and look, but I haven't had time yet). I also seem to have an oil leak around the same location, but the dipstick tube was cracked near where it went in to the engine so I'm hoping that was the source of the oil.