Golf/GTI VI :: Fogs Don't Go Off When High Beams On
Aug 15, 2010
I did some VAG COM work today. (Comfort Blinker, fogs as DRL, Needle Sweep, Auto Lock/Unlock, Remote Windows, Fogs as Corner lights, Fogs don't go off when high beams on). I am using a Hex- Can cable that is approx. 1 year old. These are the malfunctions I am getting with the VAG Com
01-Engine -- Status: Malfunction 0010
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
[Code] ....
View 3 Replies
Advertisement
I know this mod can be done on other models of Toyota, but for 6th gen Camry? And no, I won't leave the high-beams on when oncoming traffic approaches.
View 1 Replies
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
View 6 Replies
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 Replies
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
View 5 Replies
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 Replies
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
View 2 Replies
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
View 13 Replies
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 Replies
Didn't find anything on this, but I've noticed that on my GTI the Fog Lights stay on when the High Beams are turned on. Which I find unusual since no other car I've ever owned did this (Including my '12 TDI), and as far as I understood, in the US (At least here in NY), it was actually illegal to have them both on at the same time. ?
View 12 Replies
With the euro headlight switch off and I pull the high beams on a relay buzzes, the high beams come on and the interior lights come on and off
With the euro headlight switch on or in the middle and I pull the high beams there is no buzz and all the light work properly
- I've checked every fuse on the fuse box inside the car and they're all ok
- I've unplugged the headlight switch but the issue still persists
- I've unplugged the headlights one at a time, then both but the issue persists
- I pulled the relay that was buzzing and the issue went away so I figured it was a bad relay, I ordered a bosch one from ecs and replaced it but again the issue persists
View 4 Replies
My headlights don't turn on but everything else does DRL turning signals. I tested the resistance to ALL the fuses. I have two new ignitors and two new 10k light bulbs. The only way my high beams work is if i hold the lever in to bypass the resistors but like I said they don't turn on when I turn the HL switch. I just bought a new HL switch two .. the issue remains, what it could be?
View 3 Replies
So I bought an 01 GTI last week with a decent amount of things pre-modified including a Jetta front end swap? Anyway the guy I bought it from knew absolutely nothing about what had been done to the car other than the fact that there was an HID kit installed and it was set up to run high beams only.
I figured I'd remove the HID's until i drop some cash on a pair of nice projector housings. I removed them and plugged up some nice sylvania bulbs as per the OEM standard 9007, and figured I'd have no issues... They are still stuck on high beam only... What could be causing this?
View 1 Replies
Ok today I was driving my 2004 Gli n noticed when I flash my high beams (pull them back for temporary lights) my interior lights come on. When I release the high beams the lights go back off. I know this isn't normal n wanna fix it.
View 8 Replies
I hit my panic button to located car at school and I hit it again nothing turned off alarm kept going off then I hit unlock button horn sound went away but my hazards were still flashing. As I hit it again it was a delayed reaction and finally my hazards went off the buttons ony remote were a bit delayed to work after all that my fogs stopped working bought a new relay and checked all fuses still not turning on also hooked it up to VAG and it was reading the lights
View 15 Replies
New to the MK6 world and the halogens they have.. I am used to having Xenons... My question is there a way to run DRL's and fogs together?
I know there's a way to wire the city lights and fogs to run together, but I love the way the halogen DRLs look and i would like to run them together with the fogs. I do have a Euro switch.
View 2 Replies
I'd like to run my DRL's and Fogs at the same time in auto mode. Currently if you have the headlights set to auto and turn on fogs it enables the regular headlights as well. Id like only the U shaped DRLs and the fogs.
View 2 Replies
So I get on the Highway, I hit the gas and the rear window fogs up. Let up off the gas and the fog dissipates.
All I can think of is under heavy acceleration the heat from the exhaust is fogging up the rear window.
View 18 Replies
I did a search and I can't seem to find anything on how to remove the 2 side lower grills for fogs. I wanted to know if the whole bumper need to be removed?
View 7 Replies
I just had my car coded for aftermarket HIDs and i have no high beams and a bulb out indicator on. did i miss a step in the VAG coding or will the high beams work when i put the HIDs in?
View 6 Replies
I have a b6 Passat and the high beams are not working. I am going to be installing HIDS in the next week or so so I located a vag com disabled the drls and enabled Xenon without the shutter. now no high beams. they will only work with the car off and pull back the switch instead of pushing it forward.. I'm sure there are ppl on here with HIDs and there high beams working on a b6.
View 9 Replies
