My driver side switch for my passenger side window won't go up or down but my driver side window works fine. when i press the switch on my passenger side door the window works perfectly fine so I'm just wondering if there's anything i can do or what.. i know its not that serious but i just rather have my driver side switch for the passenger side window to work.
View 5 RepliesI just bought myself a MKIV .:R and it is outstanding. Im slowly getting it up to my spec. The driver side window switch doesn't like to work to roll the left window down. The double down feature works great but not the momentary part of it. All I can find are switches for the 4 door.
View 10 RepliesSo my car is just under 2 weeks old. I had the car tinted today and now the drivers side window switch will not operate the passenger side window. The switch on the passenger side works fine and the window operates perfect. The drivers side window operates perfect.
The tint guys are still out there trying to fix this. There isn't some locking mechanism that could be preventing this correct? Or did they somehow short the switch out only on the passenger side switch? So aggravating.
My GTI has 300 miles on it, just noticed that the auto up/down function on the driver's side window switch only works sometimes. You have to push or pull hard on the switch to get it to auto open or close. I'm assuming it could just be a faulty switch?
View 9 RepliesMy passenger window won't roll up or down from driver's switch, I know it isn't the window itself bc it rolls up and down from the passenger door switch and if so how did you get it fixed?
View 2 RepliesReplaced the battery on my 07 the other day, and subsequently discovered my passenger side power window would not open or close from driver side control switch. Initially thought the worse of course, that I needed a new motor for the passenger side window. Then I tried the passenger side window switch and the window worked fine.
So now, I think that the switch for the passenger side window (on the driver's side) is bad, and I will need to replace the whole switch control module. Did a search and found the root cause and solution to the problem. Apparently, after replacing a battery, I needed to RESET the passenger side switch from the passenger side, by HOLDING the switch approx. 3 seconds after raising and lowering the window two times.
The power window on the passenger front side will go down using the switch on that door, but, I have to put it up using the switch on the driver's side. What is happening?
View 7 RepliesTrunk release switch on drivers door does not open trunk. Remote and key will open trunk. Sounds like a motor is trying to close the trunk when it is being closed, but does not pull it shut ?
1. I did pull on the switch
2. Gas door switch works fine
3. It is a standard trunk (not powered)
The driver side window switch was blinking when i started the car tonight -- I've never noticed that before, is it normal?
View 7 RepliesThe trunk lock switch on the d/s inner door panel has stopped working. Also both remotes won"t open the trunk as well. Everything else seems to be OK.
View 10 Repliesmy moms 2004 touareg's switch to lock/unlock got pushed through and is in the door now i'm wondering what you have to remove to get where it would've fallen and how to get it off i've tried to snap it out but i don't want to pull it too hard and break anything else. also how do i get it back in position once i get to it
View 1 RepliesMy driver side window switch as stopped controlling my passenger window. It used to at least lower it and then not raise it but now it won't do anything. However the window rolls down and comes up just fine if I use the passenger side switch. Does this sound like a bad switch in the driver side? This is a 2010 Elantra.
View 1 RepliesThe master window switch in the front, driver's side of my 2002 trailblazer started malfunctioning last week. The issue is, the button to open/close the front, passenger window is stuck in the down position. So there is no way to put the passenger window up. All the other buttons work fine on the switch. I've pulled the whole switch out and pulled out the plug. Then I was able to use the window button on the passenger side to put the window up.
But if I plug the master switch back in, the passenger window opens back up immediately and stays that way. I've ordered a replacement part online but it's going to take a week to arrive and I've got an issue in the meantime.
I've been leaving the master switch unplugged and just locking my doors manually, I can't open any of the other windows and can't set the alarm on the truck. And because it's unplugged, it is drawing power off the battery somehow. So I turned off the interior lights and everything but after two days of leaving the switch unplugged, the truck started having major malfunctions, no AC, no radio, no indicator light telling me what gear I'm in, gas gauge doesn't work, etc. So then I plug the switch back in and everything is fine again except the damned open passenger window.
Is there any way to de-activate the front passenger window from the passenger side so that I can plug the master switch back in until my new part arrives?
The driver side door lock switch on our 1998 Mercury Mountaineer was no longer working. I replaced the switch with a remanufactured unit and it still doesn't work. The rest of the switches and keyless entry work as intended. Is there another likely reason besides a bad switch that would cause this? Which pins on the back of the switch should have power on them? Also, how do you test the switch?
View 8 RepliesAll my windows work, except my front passenger side window. It will go down, but not up from the driver side switch. It works from the passenger side.
I did NOT replace my battery or lose power. It started when I was driving and wanted the window half way down, but it kept going fully up or fully down. I finally got it to where I wanted it to be, but after that i could no longer bring it back all the way up. It can go all the way down, but no longer up.
I am sure this is pure coincidence but we had to have a new battery put in my wife's '09 Avalon. Later in the day we noticed that the front window switch for the passenger window on the drivers side, does not work. The one on the passenger door works fine so it's not the motor. How difficult are these to replace? BTW, the window lock switch is NOT on.
View 13 Replies1. The front driver's side window does not seem to have auto or express up/down. (Works fine for both passenger side windows).
2. The rear driver's side window doesn't not go up or down at all when using the driver's door switch. The rear door switch operates the window just fine, so it's a switch issue, not a window issue. (Probably obvious from the symptoms but I am not talking about accidentally locking the 3 non driver windows & then being confused)
I have a 20th anniversary gti and the driver side door wont lock and the gas door wont unlock. The passenger door is fine. The drivers side door will not lock from the switch inside the car or the remote. I already replaced the locking module and nothing changed. I also unplugged and cleaned the 3 plugs for the drivers side wiring harness.
View 2 RepliesVehicle - 2005 Suburban LS, 5.3L V8; manual slide temp controls, separate controls for driver and passenger sides.Issue - In winter drive side vents will suddenly switch from blowing hot air to cold air. Just the opposite happens in the summer with drive side vents suddenly switching for blowing cold air to hot. Interestingly the passenger side vents operate normally. Sometimes if I stop and restart the vehicle the system will start working properly again but this does not always work.
View 2 RepliesI have a 2006 Lincoln Mark LT with wear on the driver side bucket. Wanted to know if the buckets are interchangeable with passenger side? Just move controls to other side or can't be done?
View 9 RepliesI have a 2004 Hyundia Santa Fe. The passenger front window will not roll down from driver side switch but will from passenger switch but then will not go up on passenger side switch. I found a broken wire on driver side and repaired it. I put a test light on the wires on the passenger side and used the driver switch and the test light lights when using the up button and down button! I have already put a new master switch in and tested all switches they all work!
View 1 Replies