Golf/GTI VI :: Coil Plug Light Started To Blink - Acceleration Was Sluggish
Feb 5, 2010
Was on my way to work when my coil plug light started to blink - acceleration was sluggish as hell so I tried restarting the car to see what would happen. After restart the coil plug still lit up followed by the check engine light. Was gonnna be late for work so I used my other car to get to work and got the car towed to the dealer to check it out. This is what they found...
Birds decided to make a nest in my nice and cozy warm engine compartment ...
View 19 Replies
Advertisement
I drive a 2001 Hyundai Accent. About a month a go the CE light came on. at first, the car was driving fine so I thought nothing of it. Then I started noticing that the acceleration was sluggish and when it finally accelerated, it basically slingshot forward. What could be wrong. There's no smell, rattling or anything else. The only thing I noticed was the engine was a bit louder.
View 1 Replies
I picked up my first GTI about 3 months ago, a 2011 Autobahn with about 35,000 miles. I love the way it drives. I had been admiring them from a distance, and was finally able to pick one up. Unfortunately, I've run into a few issues. I'm pretty much a rookie when it comes to the inner workings of cars, but I'm eager to get into it more. My issue is below:
Over the last few weeks, the car has been consistently a little sluggish, and the acceleration has seemed a bit jumpy. I've only used premium gas, and I've been looking for simple things that might be the issue. I live in Houston, and I was wondering if maybe the extreme heat and humidity might be the reason behind the sluggish performance.
Yesterday, I decided I would clean the air intake filter. It has a K&N intake from the previous owner. After cleaning the filter and replacing it, the car wouldn't start. I may have put too much oil on the filter or the humidity may have just caused it to take longer to dry than the instructions on the cleaning kit recommend.
I called my bro-in-law who is the go-to car guy in our family. He recommended that I try starting the engine without the air filter and pull out the MAF sensor and check it out. When I took off the filter, the car started fine. I replaced the filter, then also pulled the MAF sensor to see if it needed to be cleaned. I found that the bottom of the MAF sensor was bent and slightly dented. I could also see a place where the sensor had scratched the bottom of the pipe.
This morning, the car is running a little smoother (better than before, but not as quick as I remember), but the check engine light has come one. Could the performance issues be due to the damage to the MAF sensor? With the check engine light, is that something that is automatically triggered by removing the MAF sensor? Or is there some other issue.
View 4 Replies
My wife called to tell me that her Camry would barely pull away from a standstill this morning. Very sluggish until about 2500 rpm, at which point she said it took off normally. This accompanied by the Check Engine light, which just appeared this morning. I haven't been home yet to check fluid levels or take a test drive. Anything in particular I should be looking for?
View 6 Replies
I have a 2003 Cadillac Deville with about 120,000 miles on it. The SES light came on and I had some maintenance done at STS. The light came back on the night I picked it up. I took it back the next day, they said it was related to the transmission and they do not do transmission repairs. They cleared the light and said if it came back on they could flush the transmission and maybe that would take care of the problem or they suggested I should take it to a transmission repair shop. The error codes are p0741 & p1860. Once in a while at the beginning of a drive I experience a sluggish acceleration, it does not last long( a second or 2) and then runs fine for the remainder of the drive.
View 6 Replies
Just this past weekend my wife got her 2010 Golf Highline with the 6-speed tiptronic transmission. Just a quick question about the gas pedal. when it is on "D" it really feels heavy and sluggish when going from full stop to acceleration. the pedal feels so hard and when you step on it feels like its not going at all. but as soon as it goes on 3rd everything seems ok. and then we tried putting it into "S" (sports) mode and everything was really good and quick. but when on this mode you need to be really hard on the gas pedal for it to run smooth. so i guess my question is...is it really like that when driving in the "D" mode??
View 6 Replies
I had been driving around for a few days and the car had been feeling a bit sluggish on initial acceleration and there was also a very slight backfire.
Just seemed to have lost some crispness. No fault codes thrown with VAGCOM.
Found one of the Camshaft Hall Sensors loose. I have had this before with the exhaust cam sensor but this time it was the inlet one. The bolt just comes a bit loose and the sensor can swivel around very slightly if you move it with your hand.
It seems to be enough to upset the the performance but not enough to throw any codes - after all it is still working perfectly sending a signal as far as VAGCOM is concerned.
Just need to nip it up again with an M5 Allen key and you are golden. One with a ball end makes it easier to get to. Just regained about 20 HP
Pic for information ....
View 24 Replies
What are the common misfire problems with the mk4 R32? My R is acting funny every once in a while it runs perfect then some other times it seems to big and the check engine light starts to blink but doesn't stay on I ran for codes and it said I had a miss fire but after that the code never came up again but it still blinks.
View 7 Replies
For those of you with more experience with the Hymotion pack than I:
1) What does it mean when the car "chirps?" It seems like I get 3 or 4 chirps on occasion, with each chirp itself being a rapid succession of 3 individual chirps? I assume it is something to do with the Hymotion pack because I never heard them before the pack was installed.
2) Under light acceleration, say 1 mph/sec, when the engine is just barely contributing to acceleration, at around 31mph (+/-) the engine stops putting out power (the arrows from the engine disappear), the car noticeably hesitates when the engine drops out, I get 3 or 4 chirps, then the engine comes back "online" about a second or two later and all is well. Under normal (i.e. faster) rates of acceleration, this does not happen.
View 16 Replies
2004 passat 1.8t. How do I remove the coil packs on the top of the spark plugs, so I can repalce the plugs.
I unclipped the wire and unsure how to pull the coil pack off.
No bolts. can turn it and maybe pull, but doesn't budge and don't want to break.
View 3 Replies
So I was driving my 2001 1.8t last night and put the pedal to the floor to make a yellow light and the check engine light began to blink and the engine started running very rough ever since. It idles very rough and it seems like I have lost a lot of the power.
View 7 Replies
Just installed e-codes in my car about a week or so ago.. When I did, the blinkers started to blink very fast. All the bulbs work fine and everything, and the hazards blink normally as well. Does this normally happen?
View 7 Replies
I have a 2002 prius that threw a spark plug and loosened the coil pack. The mechanic just reinstalled the plug and tightened the coil pack and said it was fine. Why it would throw a spark plug?? It was running fine, no warning lights, i just heard an unusual slight noise and opened the hood to check it out, and notice the loose coil pack over the first spark plug
View 2 Replies
2007 F-150 Screw 5.4... Successful spark plug change. Well, sort of. I disconnected some of the coil clips/wires from the coils during the operation. Upon installation of the wires/clips, one of the clips did not 'click' into place.
Thinking the clip needed to be pushed/pulled, I bent the clip a bit and it snapped off! Being the slow learner that I am, a second clip also did not 'click' in place, and you know where this is going: I have two broken clips out of 8. After those two, I was much more gentle.
So, can these clips be replaced and/or spliced in? I'm thinking about just using nylon ties to hold them in place. So far, they are staying put just by being pushed in place, but these two do not seem very secure.
In the future, what is the correct way to make sure these things 'snap' back into place if they seem to not want to cooperate?
Here's a picture of the two 'press clips' that broke off....
View 12 Replies
I changed out my plugs. The plug connector on the #3 coil no longer snaps on. My only option is to use a small ziptie to hold it in place. Can cut it off and wired a new plug end on..
View 3 Replies
I'm looking around for coil packs and came across these: Granatelli Pro Series Extreme Coil Packs.....
View 12 Replies
Well, I just went to grab some lunch and on the way home I got on it a bit. I was met with sluggish acceleration and a flashing CEL. Before I could even turn the car off, the CEL went away. I was about 200 yards from my house so I coasted home. What could the issue be?
2008 Passat 2.0T Tippy with APR stage 2.
View 5 Replies
I removed all the spark plug wires for testing/cleaning and install new spark plugs, but stupidly forgot to mark the wires where they came off at the Coil Pack. yes, Now I cannot find a diagram for the Driver's Side wire positions at the Coil Pack.
(The Passenger side wires are 1-2-3, starting from the front of the engine, simple enough); The Coil pack itself has numbers stamped on it, so I have the Passenger side done correctly.
But the Driver's Side wires are not in a Sequence of 4-5-6, instead they are 4-6-5 (or something like that), and I can't remember their positions at the Coil Pack. Looking for a drawing showing the Driver's side Wires as they connect to the Coil pack?
Example:
Front Driver's side plug wire connects to which coil pack position? (Front, Center, or Rear?)
Center Driver's side plug wire connects to which coil pack position? (F, C, or R?)
Rear Driver's side plug wire connects to which coil pack position? (F, C, or R?)
View 7 Replies
I recently took my truck to the mechanic for a bad transmission leak, they told me they had to replace the Oil Cooler Lines (upper and lower) and that they did a transmission service (flushed out the transmission), the leak is fixed, but as soon as I started driving, I noticed that the acceleration is very sluggish from a full stop, I can floor the pedal and there is no difference, once I get going it seems fine (though a bit high on RPM's but not much). I also noticed some of that liquid sealant residue droplets on my windshield, similar to the type of sealant an AC place did for me to seal an AC leak, not sure if that has anything to do with this.
View 8 Replies
Could this be from bad gas? I put a bottle of Gum out fuel system cleaner in the tank was almost full and the directions say to put it in when almost empty and then fill for best results. My son bought gas at the same place I did and his car started having idle problems at about the same time my problems started (sometimes his engine races, sometimes normal, sometimes so slow it stalls out).
My car is a 98 Volvo S70
View 5 Replies
I have a 96 aurora that has been giving me alot of problems. It started with the car being real hard to start and very sluggish upon acceleration. I had an engine code of 0300 (multiple cylinder misfire) I had a full tune up as well as an intake manifold gasket done. This seemed to fix the problem for a short time. The problem then started again. this time i was told that it was a fuel pump so i went ahead and changed that as well. Again this fixed the problems for a short time. Now i am having the same problem again. I now have 2 engine codes 0300 as well as 0151(bank 1 sensor 2 o2 sensor) This started after it rained and i notice the problem always seems to be a little worse when its wet out. Also the car is really only hard to start when it has sat for awhile. m If i drive it and come back 5 minutes later it will start right up though it still idels really rough and has no acceleration. Can the o2 sensor be causing the misfires and if so will that make it hard to start. Also if i changed the fuel pressure regulator about a year ago.
View 2 Replies
